FNIRSI DST-201 & DST-210 3-in-1 Multifunction Multimeter Oscilloscopes in Malaysia: Full Technical Deep-Dive, Industrial Safety Ratings, and All-in-One Diagnostic Power
For electrical engineers, industrial maintenance technicians, automotive specialists, and educators across Malaysia, carrying separate test instruments for every job can slow down troubleshooting and clutter any toolkit. Modern electrical and electronic diagnostics rarely stop at a simple voltage reading; technicians routinely need to measure precision current and capacitance, capture fleeting signal transients, and inject test waveforms into live circuits. The FNIRSI DST-201 and DST-210 solve this challenge by combining a CAT IV 600V / CAT III 1000V 20,000-count Digital Multimeter, a Digital Storage Oscilloscope, and a 13-Waveform DDS Signal Generator inside one rugged, ergonomic handheld body measuring 177 x 87.5 x 34.5mm and weighing just 298 grams.
Finished in a durable Black & Blue industrial housing with a bright 2.8-inch TFT high-definition color screen, both models are powered by a high-capacity 3.7V 3000mAh rechargeable lithium battery that delivers an exceptional 15 hours of standby and field runtime.
Industrial-Grade 20,000-Count Digital Multimeter with CAT IV 600V Safety
At the foundation of both the DST-201 and DST-210 is a high-resolution 20,000-count Digital Multimeterrated to CAT IV 600V and CAT III 1000V overvoltage safety standards—giving technicians confidence when working across everything from delicate low-voltage PCBs to commercial distribution panels and industrial machinery.
Its comprehensive measurement capabilities cover virtually every electrical parameter encountered in the field:
-
High-Voltage DC & AC Measurements: Measures DC Voltage across 1.9999V, 19.999V, 199.99V, and up to 1000V with a sharp ±(0.5%+3) accuracy, alongside AC Voltage up to 750.0V with ±(1%+3)accuracy.
-
Precision Milliamps to 10A Current Testing: Handles both DC Current (±(1.2%+3) accuracy) and AC Current (±(1.5%+3) accuracy) across four dedicated ranges—19.999mA, 199.99mA, 1.9999A, and up to 9.999A—making it ideal for diagnosing parasitic battery drains, sensor loops, and motor loads.
-
Wide-Range Resistance & Massive Capacitance: Measures resistance from 199.99Ω up to 19.999MΩ(±(0.5%+3) on upper ranges) and spans an extraordinary capacitance range from 9.999nF all the way up to 99.99mF, effortlessly verifying both tiny SMD decoupling capacitors and heavy-duty motor run or power supply filter capacitors.
-
Frequency, Wide-Span Temperature & Live Wire Detection: Measures signal frequencies up to 9.999MHz with ±(0.1%+2) accuracy, reads temperatures across an extreme -55°C to 1300°C (-67°F to 2372°F) range for HVAC and industrial thermal checks, and includes dedicated Diode testing, rapid Continuity testing, and non-contact Live wire detection for safer electrical troubleshooting.
Choosing Your Oscilloscope & Signal Generator Speed: DST-201 vs. DST-210
While both models feature the exact same 20,000-count multimeter engine, 1MΩ input impedance, 10mV/div to 10V/div vertical sensitivity (x1), Auto/Normal/Single trigger modes, and a 10-parameter automatic measurement suite (Maximum, Minimum, Average, RMS, Peak-to-Peak VPP, Amplitude, Frequency, Period,Duty Cycle, and Pulse Width), FNIRSI offers two distinct speed tiers for the integrated oscilloscope and waveform generator:
-
FNIRSI DST-201 — The Everyday 1MHz Scope & 10kHz Waveform Generator: Designed for general electrical maintenance, automotive diagnostics, appliance repair, and technical education, the DST-201 features a single-channel 1MHz analog bandwidth oscilloscope with a 5MSa/s sampling rate and a 500ns/div to 20s/div time base scale. Its built-in single-channel Waveform Generator outputs frequencies up to 10kHz, providing ample speed for audio stages, automotive sensors, and standard microcontroller circuits.
-
FNIRSI DST-210 — High-Speed 10MHz Oscilloscope & 50kHz Generator: Engineered for demanding electronics repair, industrial control systems, and high-frequency circuit debugging, the flagship DST-210 boosts oscilloscope performance tenfold to a genuine 10MHz analog bandwidth, a rapid 48MSa/s real-time sampling rate, and a fast 50ns/div to 20s/div time base scale. Its integrated signal generator also steps up fivefold to a 50kHz maximum output frequency, allowing engineers to test faster switching circuits, PWM motor drives, and power supply ripples with crystal-clear precision.
Built-In 13-Waveform DDS Signal Generator
Both the DST-201 and DST-210 eliminate the need to carry a separate benchtop function generator by integrating a versatile single-channel Waveform Generator with an adjustable output amplitude from 0.1V to 3V and a 0–100% adjustable duty cycle on both square and sawtooth waves. Technicians can output 13 distinct signal types—including sine wave, square wave, sawtooth wave, half-wave, full-wave, ladder wave,anti-ladder wave, noise wave, exponential rise, exponential fall, DC signal, multitone, sinc pulse, and Lorentz wave—making active circuit stimulation and sensor simulation effortless anywhere on site.
Source Genuine FNIRSI Instruments in Malaysia from MTM Precision
When investing in professional test and measurement equipment, partnering with an established local specialist ensures 100% genuine products, knowledgeable technical guidance, and dependable after-sales support. Whether you are equipping a university engineering laboratory, outfitting a maintenance team, or upgrading your personal diagnostic toolkit, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and industrial measurement solutions.
Reach out to our team today for pricing, stock availability, or bulk educational and corporate quotations, or visit our showroom and service centre in Puchong, Selangor.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
Office Tel: +603-80807172