FNIRSI SG-003A & SG-004A Signal Generator Process Calibrators in Malaysia: Complete Technical Breakdown, Precision Accuracy Comparison, and Industrial Loop Testing Guide

FNIRSI SG-003A & SG-004A Signal Generator Process Calibrators in Malaysia: Complete Technical Breakdown, Precision Accuracy Comparison, and Industrial Loop Testing Guide

Across Malaysia's automated manufacturing plants, oil and gas installations, water treatment facilities, and process control industries, instrumentation engineers rely on fast, dependable signal calibration tools to keep production running smoothly. Whether commissioning new PLC analog I/O modules, testing 4–20mA transmitter loops, or simulating thermal sensors in tight control cabinets, carrying bulky benchtop calibrators is impractical. The FNIRSI SG-003A and SG-004A Signal Generator Process Calibrators solve this challenge by packing laboratory-grade signal simulation, precision measurement, and independent loop power into a rugged, pocket-sized blue housing measuring just 112 x 82 x 28mm and weighing only 180 grams.
 
Both models feature a crisp 2.4-inch TFT full-color LCD screen with auto-zooming real-time curve plotting, a long-lasting 3.7V 3000mAh rechargeable lithium battery, and full MODBUS Slave communication via RS485 for seamless integration with PLCs and PC configuration software. Understanding the key differences in measurement capabilities and resolution between the SG-003A and SG-004A helps engineers select the exact instrument their facility demands.
 

Precision Input & Output Capabilities: Choosing Between the SG-003A and SG-004A

While both instruments share the same ergonomic pocket chassis, intuitive navigation keys, and core process signal functions, FNIRSI engineered the SG-003A for streamlined analog loop work and stepped up the SG-004A with ultra-fine resolution and full temperature sensor simulation:
 
  • Current Output & Measurement (0–24mA / 4–20mA): Both models measure input currents from 0 to 24mA with ±(0.1%+0.005) accuracy and 0.01mA resolution, and output selectable 0–24mA, 4–20mA, 0–20mA, 0–10mA, or custom USER ranges with selectable 12V/24V loop compliance voltage up to a 750Ω maximum load. However, the SG-004A boosts output precision fivefold to ±(0.02%+0.003)accuracy and an ultra-fine 0.001mA resolution (compared to ±(0.1%+0.005) and 0.01mA on the SG-003A). Both models also support passive XMT (0–24mA) transmitter simulation with user-defined percentage scale conversion.
  • Voltage Output & Measurement: On the input side, the SG-003A measures 0–30V while the SG-004Ameasures 0–24V (both at ±(0.1%+0.005) accuracy and 0.01mV resolution). On the output side, both provide selectable 1–5V, 0–5V, 0–10V, 0–24V, and custom USER voltage ranges with built-in over-current protection—with the SG-004A again delivering ten times sharper 0.001V resolution and ±(0.02%+0.003) accuracy (versus 0.01V and ±(0.1%+0.005) on the SG-003A).
  • Frequency, PWM & Pulse Counting: Both models output Frequency, PWM, RPM, and pulse countsfrom 0 to 9999Hz (±2% accuracy, 5-bit resolution). Exclusively on the SG-004A, the input terminals also measure incoming Frequency, PWM, RPM, and pulse counts from 0 to 10kHz.
  • Independent 24V Loop Power Output: Both calibrators include a dedicated 24V output with non-volatile memory settings, allowing a single technician to power up two-wire field transmitters directly while measuring their loop current.
  • Exclusive Thermocouple & Thermal Resistance (RTD) Support on the SG-004A: For facilities working heavily with temperature instrumentation, the SG-004A adds full two-way input and output simulation for Thermocouples (Types S, B, K, R, J, T, N, plus WRE25/26) and Thermal Resistance (RTD) sensors—covering Pt100 (-200°C to 650°C), Cu50 (-20°C to 150°C), and direct resistance (0 to 390Ω).

Automated Programming, Real-Time Curves & Complete Accessory Kit

To accelerate repetitive commissioning and endurance checks on the plant floor, both models allow technicians to store 4 groups of preset signal values for instant one-touch recall via the directional keypad,alongside 3 automated programming modes—monotonous rise, monotonous fall, and continuous cycle. The SG-004A further adds 30 groups of historical data recording so engineers can log field measurements for later documentation.
 
Every unit ships ready to work straight out of the box with a complete accessory bundle—including the main calibrator unit, four heavy-duty test clips, a USB data cable, a charger, and a comprehensive user manual.
 

Order Genuine FNIRSI Process Calibrators in Malaysia from MTM Precision

When investing in industrial calibration and process control instruments, partnering with an established local specialist ensures 100% genuine products, knowledgeable technical guidance, and dependable after-sales support. Whether you are equipping an instrumentation maintenance team, upgrading a technical training institute, or adding a reliable loop calibrator to your personal field kit, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and industrial measurement solutions.
 
Reach out to our team today for model selection advice between the SG-003A and SG-004A, pricing, stock availability, or bulk corporate quotations, or visit our showroom and service centre in Puchong, Selangor.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026