FNIRSI LPM-10A/B/C Multifunction Cable Trackers in Malaysia: Complete Model Comparison, Fiber Optic Diagnostics, IP Network Testing, and Smart Cabling Solutions
FNIRSI LPM-10A/B/C Multifunction Cable Trackers in Malaysia: Complete Model Comparison, Fiber Optic Diagnostics, IP Network Testing, and Smart Cabling Solutions
Core Copper Cabling & PoE Diagnostics Shared Across All Three Models
-
Complete Network Cable Testing: Performs instant line alignment mapping, continuity and fault testing, and clear error prompts via standard RJ45 connectors—identifying open circuits, short circuits,and miswired pairs within seconds.
-
Standard & Anti-Interference Wire Tracing: Supports both standard line tracing and anti-interference line tracing modes, filtering out electrical noise inside crowded server racks and bundled ceiling conduits so you can locate target cables effortlessly.
-
Intelligent Port Flashing: Identifies active switch or router ports through both full-cable and wire-pair flashing, supporting self-negotiating and non-self-negotiating network equipment.
-
Precision Length Measurement: Accurately measures cable lengths and pinpoints open-circuit fault distances from 2.5 meters up to 500 meters.
-
Comprehensive PoE Testing (5–60V): Evaluates Power over Ethernet circuits across 5V to 60V,identifying both Endspan and Midspan connection methods and verifying compliance with IEEE 802.3af, 802.3at (PoE+), 802.3bt (PoE++), as well as non-standard PoE injectors.
-
Feature-Packed Handheld Receiver: Every kit pairs with a dedicated receiver featuring wire tracing, line alignment verification, Non-Contact Voltage (NCV) detection, a headset jack for noisy server rooms, low-voltage indication, and a built-in LED flashlight.
Choosing the Right Model: LPM-10A vs. LPM-10B vs. LPM-10C
-
FNIRSI LPM-10A — The Essential Copper & PoE Network Tracker: Measuring 152 x 68 x 31mm and weighing 186g, the LPM-10A is the ideal everyday instrument for structured cabling contractors, IT support technicians, and CCTV installers who need rock-solid copper cable tracing, length measurement up to 500m, port flashing, and IEEE 802.3af/at/bt PoE verification without paying for extra fiber or IP modules.
-
FNIRSI LPM-10B — The Hybrid Copper & Fiber-Optic Specialist: Built slightly taller at 167 x 68 x 31mm (187g) to house dedicated optical ports, the LPM-10B adds two critical fiber-optic testing tools alongside full copper diagnostics:
-
Red Light Visual Fault Locator (VFL): Outputs a 10mW optical test beam to visually pinpoint sharp bends, broken fibers, and faulty splices along fiber patch cords and drop cables.
-
Optical Power Meter (OPM): Accurately measures optical signal power across six calibrated wavelengths—580nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm—making it the go-to choice for telecom engineers, FTTH installers, and data centre technicians.
-
-
FNIRSI LPM-10C — The Active IP Network & Layer-3 Troubleshooter: Retaining the compact 152 x 68 x 31mm (187g) chassis, the LPM-10C upgrades your diagnostic workflow beyond physical cabling into active network layer testing by adding:
-
PING Test: Directly verifies IP connectivity, packet response, and network reachability to routers,servers, or internet gateways right from the handheld tester.
-
IP Scan: Rapidly scans the local subnet to discover active IP addresses and connected network devices—ideal for enterprise IT administrators and system integrators commissioning live networks.
-
Order Genuine FNIRSI Network Testers in Malaysia from MTM Precision
17 Nov 2026