FNIRSI TSG6020 & TSG3020 2-Channel Function Signal Generators in Malaysia: Full Technical Deep-Dive, Ultra-Low Jitter Precision, and Built-In 100MHz Frequency Counter

FNIRSI TSG6020 & TSG3020 2-Channel Function Signal Generators in Malaysia: Full Technical Deep-Dive, Ultra-Low Jitter Precision, and Built-In 100MHz Frequency Counter

For electronics engineers, university researchers, RF and embedded developers, and industrial test teams across Malaysia, generating clean, predictable, and repeatable test signals is essential for verifying circuit performance. Whether you are characterizing analog filter roll-off, testing high-speed digital logic thresholds,simulating modulated communication carriers, or debugging industrial control loops, signal integrity matters.The FNIRSI TSG6020 and TSG3020 2-Channel Function / Arbitrary Waveform Signal Generators deliver laboratory-grade precision, ultra-low timing jitter, and extensive modulation capabilities in a sleek, modern desktop instrument.
 
Engineered with dual independent output channels, a rapid 200 MSa/s sampling rate, 14-bit vertical resolution (including sign), and an ultra-fine 1 μHz frequency resolution, the TSG3020 (30 MHz maximum output frequency) and TSG6020 (60 MHz maximum output frequency) give engineers the exact bandwidth and waveform fidelity needed for demanding R&D, educational, and production testing.
 

High-Fidelity Waveform Synthesis, Low Distortion & Ultra-Low Jitter

At the core of both the TSG6020 and TSG3020 is a precision 50 Ω typical output impedance architecture supporting both DDS (Direct Digital Synthesis) and Point-by-Point arbitrary output modes—ensuring clean signal transitions across Sine, Square, Ramp, Pulse, Triangle, Noise, DC, and custom Arbitrary waveforms:
 
  • Wide Dynamic Amplitude & DC Offset Control: Delivers 2 mVpp to 20 Vpp into High-Z (<10 MHz) and 2 mVpp to 10 Vpp (>10 MHz), or 1 mVpp to 10 Vpp (<10 MHz) and 1 mVpp to 5 Vpp (>10 MHz) into a 50 Ω load, paired with a wide -9.999V to +9.999V DC offset (High-Z) and ±(Set Value × 5% + 2 mVpp)amplitude accuracy at 1 kHz sine.
  • Clean Spectral Purity & Tight Amplitude Flatness: Maintains Total Harmonic Distortion (THD) below 0.2% (Sine, DC to 20 kHz, 1 Vpp) and impressive amplitude flatness across the entire spectrum—±0.1 dB(≤100 kHz), ±0.3 dB (≤20 MHz), ±0.5 dB (≤30 MHz), ±0.6 dB (≤40 MHz), and ±0.8 dB (≤60 MHz).
  • Fast Edge Transitions & Picosecond-Level Jitter: Features a crisp <20 ns typical rise/fall time, a wide 0.01% to 99.99% adjustable square-wave duty cycle, and ultra-low timing jitter—5 ns ± 150 ps in DDS mode and an astonishing ±150 ps in Point-by-Point mode.
  • Deep Arbitrary Memory & Non-Volatile Waveform Storage: Stores custom waveforms up to 4 kpts memory depth and provides 24 non-volatile waveform storage slots, allowing engineers to save and recall complex proprietary test signals instantly.

Full Modulation Suite, Frequency Sweeps & 7-Digit 100MHz Frequency Counter

Far more than a basic sine/square generator, the FNIRSI TSG6020 and TSG3020 integrate advanced signal conditioning and measurement tools into one unified benchtop unit:
 
  • 6 Complete Modulation Types & Flexible Operating Modes: Supports AM, FM, PM, FSK, ASK, and PSK modulation right out of the box, alongside Continuous, Gated, Modulate, and Frequency Sweepoperating modes (with both Linear and Logarithmic sweep profiles) for comprehensive receiver, filter,and communication circuit testing.
  • Built-In 7-Digit TTL-Compatible Frequency Counter: Eliminates the need for a separate bench counter by accurately measuring external TTL-level signals across an expansive 100 mHz to 100 MHz frequency range—displaying frequency, period, and duty cycle directly on screen.
  • Modern PC & Portable Power Interfaces: Equipped with a USB Device interface for PC waveform transfer and remote control, plus a versatile USB Type-C power input that allows the generator to run off standard portable power banks for convenient field or mobile lab work.

Order Genuine FNIRSI Signal Generators in Malaysia from MTM Precision

When investing in high-precision laboratory and electronic test instruments, partnering with an established local specialist ensures 100% genuine products, knowledgeable technical guidance, and dependable after-sales support. Whether you are equipping a university engineering lab, upgrading an R&D validation bench, or sourcing precision signal generators for industrial testing, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and measurement solutions.
 
Reach out to our team today for model selection advice between the TSG3020 and TSG6020, pricing, stock availability, or bulk educational and corporate quotations, or visit our showroom and service centre in Puchong,Selangor.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026