FNIRSI LC1020E High-Precision Handheld LCR Meter in Malaysia: 100kHz Multi-Frequency Bridge Testing, 0.3% Accuracy, and Automated Batch Sorting

FNIRSI LC1020E High-Precision Handheld LCR Meter in Malaysia: 100kHz Multi-Frequency Bridge Testing, 0.3% Accuracy, and Automated Batch Sorting

In Malaysia's electronics manufacturing plants, R&D laboratories, university engineering departments, and component repair workshops, accurately characterizing inductors, capacitors, and resistors requires true AC impedance bridge measurement—not a basic DC multimeter. Parasitic resistance, dissipation factor, and frequency-dependent behavior can make or break high-frequency power supplies, filters, and RF circuits. Enter the FNIRSI LC1020E, a portable, High-Precision Handheld LCR Meter engineered to bring bench-grade 0.3% basic measurement accuracy and up to 100 kHz test frequencies directly into the palm of your hand.
 
Equipped with a clear 2.8-inch TFT color display, selectable series and parallel equivalent circuit modes, and long battery endurance, the FNIRSI LC1020E empowers hardware engineers, quality control inspectors, and technicians to evaluate passive component performance rapidly in the lab, on the production line, or during field maintenance.
 

5 Test Frequencies & 3 RMS Voltage Levels for True Component Characterization

Passive components behave differently depending on operating frequency and signal excitation level. The FNIRSI LC1020E gives engineers full control over AC stimulus parameters to match real-world circuit conditions:
 
  • 5 Selectable Test Frequencies (100 Hz – 100 kHz): Switch effortlessly between 100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz—allowing you to test electrolytic filter capacitors at 100/120 Hz, general components at 1 kHz, and high-frequency switching inductors and ceramic capacitors up to 100 kHz.
  • 3 Selectable RMS Test Voltage Levels: Choose between 0.1V, 0.3V, and 0.6V RMS test levels to accurately characterize voltage-sensitive MLCC capacitors and magnetic cores without saturating or over-driving delicate parts.
  • Comprehensive Multi-Parameter Measurement (L/Q, C/D, R/D): Simultaneously measures primary and secondary parameters—Inductance & Quality Factor (L/Q), Capacitance & Dissipation Factor (C/D), and Resistance & Dissipation Factor (R/D)—with selectable series or parallel analysis modes.
  • Open & Short Calibration Compensation: Built-in open/short calibration cancels out residual fixture impedance and test lead parasitics, preserving 0.3% high-precision measurement accuracy even when probing low-value inductors or small pico-farad capacitors.

Automated Batch Tolerance Sorting, Real-Time Logging & Field Ergonomics

Built to accelerate incoming quality inspection (IQC), production-line sorting, and troubleshooting workflows, the FNIRSI LC1020E combines laboratory precision with smart field usability:
 
  • 0.1%–99.9% Tolerance Setting with Audio-Visual Pass/Fail Alerts: Program custom tolerance bands from 0.1% to 99.9% for rapid batch component screening. The meter automatically evaluates every component and delivers instant audio-visual Pass/Fail alerts, eliminating operator fatigue during repetitive sorting.
  • Real-Time Data Recording & Data Hold: Supports real-time data recording and convenient data holdfunctionality, making it easy to monitor thermal drift or capture readings in hard-to-reach equipment cabinets.
  • Dual Test Interfaces & Energy-Saving Design: Features both direct SMD/lead insertion slots and dedicated Kelvin/guard test jack terminals for versatile probing, alongside an automatic sleep mode for extended battery life. Certified to CE and RoHS international standards and supporting both English and Chinese interfaces, the LC1020E is built for reliable everyday use.

Order Genuine FNIRSI LCR Meters in Malaysia from MTM Precision

When investing in precision electronic testing and measurement instruments, partnering with an established local specialist ensures 100% genuine products, knowledgeable technical guidance, and dependable after-sales support. Whether you are equipping an electronics manufacturing QC line, outfitting a university engineering laboratory, or upgrading your personal R&D bench, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and measurement solutions.
 
Reach out to our team today for pricing, stock availability, or bulk corporate and educational quotations, or visit our showroom and service centre in Puchong, Selangor.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026