FNIRSI LC1020E High-Precision Handheld LCR Meter in Malaysia: Complete Technical Breakdown, 4.5-Digit 100H/100mF/10MΩ Bridge Metrology, and 5-Terminal Kelvin Testing

FNIRSI LC1020E High-Precision Handheld LCR Meter in Malaysia: Complete Technical Breakdown, 4.5-Digit 100H/100mF/10MΩ Bridge Metrology, and 5-Terminal Kelvin Testing

For electronics engineers, quality assurance inspectors, R&D hardware developers, and repair technicians across Malaysia, evaluating passive components accurately requires true multi-parameter impedance bridge testing rather than basic multimeter checks. Whether you are measuring low-ESR electrolytic capacitors in a switching power supply, verifying high-inductance power chokes, or screening tight-tolerance SMD resistors on a production line, parasitic fixture capacitance and test-lead resistance can easily distort readings. The FNIRSI LC1020E High-Precision Handheld LCR Meter overcomes these challenges by delivering 0.3% basic accuracy, 4.5-digit dual-parameter resolution, and three-terminal / five-terminal Kelvin testing inside a rugged, ergonomic Black & Blue handheld chassis measuring 185 × 85 × 35 mm and weighing just 299 grams.
 
Powered by a high-capacity 3.7V / 3000mAh rechargeable lithium battery and featuring a crisp 2.8-inch TFT LCD display with adjustable brightness, the FNIRSI LC1020E provides dependable, long-endurance bridge diagnostics in the laboratory, on the factory floor, or during field maintenance.
 

Comprehensive 4.5-Digit Impedance Metrology & Internal Bias Stabilization

At the core of the FNIRSI LC1020E is a precision 100Ω output impedance AC bridge engine engineered to measure both primary and secondary component parameters simultaneously with 4.5-digit display resolution:
 
  • Expansive L, C & R Measurement Ranges: Accurately measures Inductance (L) from 0 to 100H, Capacitance (C) from 0 to 100mF, and Resistance (R) from 0 to 10MΩ—covering everything from tiny surface-mount passives to heavy industrial filter chokes and bulk capacitor banks.
  • Simultaneous Primary & Secondary Parameter Readout: Automatically or manually measures primary parameters (AUTO / R / C / L / Z) paired with real-time secondary parameters (X / D / Q / θ / ESR), allowing technicians to spot high Equivalent Series Resistance (ESR) or poor Quality Factor (Q) at a glance.
  • 5 Test Frequencies & 3 RMS Excitation Levels: Supports selectable test frequencies of 100Hz, 120Hz, 1kHz, 10kHz, and 100kHz alongside 0.1V, 0.3V, and 0.6V RMS test levels.
  • Selectable Internal Bias Voltage (0.0V / 0.5V): Applying internal DC bias reduces measurement fluctuations and stabilizes readings when characterizing polarized or voltage-sensitive components.
  • Three-Terminal & Five-Terminal Kelvin Configuration + Open/Short Calibration: Supports both three-terminal and five-terminal test configurations combined with built-in Open Circuit Calibration (to eliminate stray capacitance) and Short Circuit Calibration (to cancel lead and fixture resistance).

Adjustable Measurement Speeds, Automated Sorting & Complete Kelvin Accessory Kit

Built to streamline incoming quality control (IQC), component batch matching, and automated test logging, the FNIRSI LC1020E integrates practical workflow features right out of the box:
 
  • 3 Selectable Measurement Speeds: Switch between 4 readings/second (Fast) for rapid production sorting, 2 readings/second (Medium) for balanced general diagnostics, and 1 reading/second (Slow)for maximum stability and precision.
  • Sorting & Comparison Mode with Audio-Visual Alerts: Preset nominal values and tolerance limits to perform one-click component screening with immediate audio-visual Pass/Fail alerts, supported by Data Hold, Record Function, and Auto-Off power saving.
  • USB Type-C Virtual Serial Port Connectivity: Connects directly to a PC via its USB Type-C (Virtual Serial Port) interface for automated data logging and bench integration.
  • Complete Ready-to-Test Accessory Bundle: Every FNIRSI LC1020E includes the main meter, a USB data cable, a calibration shorting plate, a dedicated Kelvin test clip, Black & Red test leads, and a user manual.

Order Genuine FNIRSI LCR Meters in Malaysia from MTM Precision

When investing in precision electronic testing and measurement instruments, partnering with an established local specialist ensures 100% genuine products, knowledgeable technical guidance, and dependable after-sales support. Whether you are equipping an electronics manufacturing QC line, outfitting a university engineering laboratory, or upgrading your personal R&D bench, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and measurement solutions.
 
Reach out to our team today for pricing, stock availability, or bulk corporate and educational quotations, or visit our showroom and service centre in Puchong, Selangor.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026