Split-Type Wind Speed and Air Volume Meter in Malaysia: In-Depth Guide to the Swevy SW-6056 Airflow Meter

Split-Type Wind Speed and Air Volume Meter in Malaysia: In-Depth Guide to the Swevy SW-6056 Airflow Meter

In HVAC testing, adjusting, and balancing (TAB), cleanroom commissioning, ductwork verification, exhaust system evaluation, and commercial building airflow audits across Malaysia, measuring air velocity alone is often only half the job. Engineers and contractors routinely need direct volumetric airflow figures in CFM or CMM to confirm whether supply diffusers, air handling units (AHUs), and exhaust fans are delivering their design air change rates without manual cross-sectional area calculations on site. A split-type wind speed and air volume meter with a tethered vane probe lets technicians position the sensor cleanly at ceiling diffusers or duct openings while entering duct area directly for instant air volume calculations.
 
The Swevy SW-6056 Split-Type Wind Speed and Air Volume Meter combines high-resolution wind speed measurement up to 45 m/s, direct CFM and CMM air volume calculation, ambient temperature sensing, and relative humidity measurement in a rechargeable handheld instrument. Following the established long-form English format without tables—and tailored for technical buyers, HVAC contractors, and facility engineering teams in Malaysia—this guide explores the specifications, practical features, and everyday applications of the Swevy SW-6056.
 

High-Resolution Wind Speed, Direct Air Volume (CFM/CMM), Temperature & Humidity Diagnostics

Built for comprehensive HVAC balancing and ventilation verification, the Swevy SW-6056 delivers multi-parameter environmental and airflow measurements on a single screen:
 
  • Five Wind Speed Units with Fine Resolution: Measures air velocity across 0.3–45 m/s (0.001 resolution, 0.3 m/s minimum starting threshold), 59–8858 Ft/min (0.01/0.1/1 resolution, 59 Ft/min minimum starting threshold), 0.58–88 Knots (0.01/0.1 resolution, 0.58 Knots minimum starting threshold), 1.08–162 Km/h (0.001 resolution, 1.08 Km/h minimum starting threshold), and 0.67–100 mph (0.001/0.01 resolution, 0.67 mph minimum starting threshold).

  • Defined Wind Speed Accuracy: Rated at ±0.5 m/s + 0.05 x indicated wind speed for consistent, repeatable airflow readings across low and high velocities.

  • Direct Air Volume Calculation (CFM & CMM): Calculates volumetric airflow in CFM (FT³/MIN) from 0 to 999,900 (0.001–100 Ft³/min resolution, configurable area 0.01–999) and CMM (M³/MIN) from 0 to 999,900 (0.001–100 m³/min resolution, configurable area 0.01–999), eliminating manual calculator conversions during diffuser and duct balancing.

  • Ambient Temperature & Relative Humidity Sensing: Measures air temperature from 0.0°C to 45.0°C(32.0°F to 113.0°F) at 0.1°C / 0.1°F resolution, alongside relative humidity from 1% RH to 99% RH at 1% RH resolution.

Split-Probe Ergonomics & Rechargeable Battery Portability in Malaysia

Designed for mobile TAB engineers, HVAC technicians, and M&E contractors working across commercial towers, hospitals, factories, and cleanrooms in Malaysia, the Swevy SW-6056 pairs split-probe reach with rechargeable power:
 
  • Separate Vane Probe with Coiled Cord: Lets technicians reach overhead ceiling diffusers, grilles, fan discharges, and duct openings comfortably while keeping the main display at eye level.

  • Compact Handheld Body & 3.7V Lithium Battery: Measures 64 x 157 x 30 mm and operates on a rechargeable 3.7V lithium battery, reducing disposable battery waste and downtime during extended commissioning sessions.

Where the Swevy SW-6056 Adds Value Across Malaysia

For HVAC testing and balancing specialists, M&E contractors, facility engineers, and industrial maintenance teams across Malaysia, the Swevy SW-6056 supports practical airflow and indoor air checks across:
 
  • HVAC TAB & Diffuser Air Volume Commissioning: Entering outlet area (0.01–999) to read CFM or CMM directly up to 999,900 alongside air velocity up to 45 m/s.

  • Cleanrooms, Laboratories & Server Rooms: Monitoring volumetric airflow, supply air temperature (0.0°C–45.0°C), and relative humidity (1%–99% RH) simultaneously.

  • Industrial Exhaust Hoods, AHUs & Ductwork Audits: Reaching awkward vents safely with the tethered vane probe and a rechargeable 3.7V lithium-powered unit.

Equipping your technical team with the Swevy SW-6056 helps make wind speed, air volume, temperature, and humidity measurements faster, simpler, and more accurate across Malaysia.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

22 Nov 2026