Name: CUSTOM Phase detection/voltage detector VP-01U
Brand: CUSTOM
Availability: InStock

CUSTOM Phase detection/voltage detector VP-01U

CUSTOM Phase detection/voltage detector VP-01U

Brand: CUSTOM

Category: Testing Instruments

CUSTOM Dustproof and waterproof AC voltage detector V-20WP

CUSTOM Fully automatic flexible clamp meter CFL-02R

Description

Specifications

SKU: CUSTOM Phase detection/voltage detector VP-01U

Product overview

Covered AC Wire

Approximately 5 minutes (cannot be canceled)

IP53 compliant

You can check the phase sequence (the order in which electromotive force is generated) in three-phase three-wire and three-phase four-wire distribution lines.

The measurement method involves touching the power distribution line with a thin tip like the tip of a pen, so measurements can be made efficiently even inside crowded distribution boards.
It also has a non-contact voltage detection function.
Measurement results are indicated by LED color and beep sound, making it an intuitive and easy-to-understand method.

Product Introduction Video

Features

Advantages of the VP-01U Phase and Voltage Detector

It doesn't matter where you work!

It is now possible to detect phases in thin and thick wiring or narrow spaces that were previously not possible.

Extremely portable!

The main body and sensor are integrated into a compact, lightweight body measuring 153mm in length and weighing 50g. It can be stored in a pocket or on a belt.

Improve work efficiency!

There is no time required for installation, changing measurement points or removal, reducing the burden on workers.

Operating Procedure

Voltage detection mode: Checks for the presence of ground phases, broken wires, etc.

The sensor tip touches the insulated wire in sequence to check for ground phases and open (missing phase) wires.

Phase detection mode: Check the phase sequence of the power distribution line.

When the beep sounds four times in step 2, touch the second insulated wire. When the beep sounds four times, touch the third insulated wire.

After the third insulated wire emits four beeps, the phase detection result will be displayed on the sensor.

To ensure safety, the phases are checked in the reverse order of the first time.

Usage example

Electrical test image

VP-01U Voltage detection image: normal phase

VP-01U Voltage detection image: reverse phase

*Please wear protective insulating equipment when measuring or in areas where electric shock is expected.

Part names

Main unit

① Test probe
② Status display (red LED / green LED)
③ Voltage detection mode display (yellow LED)
④ Phase detection mode display (red LED / green LED)
⑤Function button
⑥Clip
⑦Spacer
⑧Battery cap

360° rotating image

Clicking on the image will open a new window.

▲Back to top of page

specification

General specifications

Voltage Range	100 to 1000 V AC
frequency	45 to 65 Hz
Auto Power Off	Approximately 5 minutes (cannot be canceled)
Operating temperature and humidity	-10 to +40°C, 75% RH or less (no condensation) +40 to +50°C, 45% RH or less (no condensation)
Storage temperature and humidity	-20 to +60°C, 80% RH or less (excluding batteries, no condensation)
size	Approx. W 21 x H 153 x D 26 mm
weight	Approximately 50 g (including batteries)
power supply	2 x AAA batteries
battery life	Approximately 150 hours (when using alkaline batteries)
accessories	operating instructions
proofreading	Not possible
Compliance standards	IEC 61010 1000V CAT.III, 600V CAT.IV
JAN	4983621100242

Design registration number 1545035
Patent registration number 6630056

Inquiry - CUSTOM Phase detection/voltage detector VP-01U

Name*

Email*

Contact Number*

Message (optional)