Name: CUSTOM Dustproof and waterproof AC voltage detector V-20WP
Brand: CUSTOM
Availability: InStock

CUSTOM Dustproof and waterproof AC voltage detector V-20WP

CUSTOM Dustproof and waterproof AC voltage detector V-20WP

Brand: CUSTOM

Category: Testing Instruments

CUSTOM AC/DC voltage detector V-17

CUSTOM Phase detection/voltage detector VP-01U

Description

Specifications

SKU: CUSTOM Dustproof and waterproof AC voltage detector V-20WP

Product overview

Covered AC Wire

Approximately 5 minutes (cannot be canceled)

Tip/Bottom

IP67 compliant

A non-contact AC voltage detector with a "wide mode" function that can detect voltages as low as approximately 12V.

The voltage detection status is indicated by sound and LED.
Equipped with two LED lights, one at the tip of the probe and one on the bottom of the product, which are useful in dark places.
Compliant with IP67 waterproof and dustproof standards, it can withstand harsh environments such as sudden rain, submersion in water, and dust.
It also has enhanced shock resistance with a drop resistance of 2m.

Product Details

Water and dust don't matter! The tough body can withstand harsh environments!

Features

Dustproof/waterproof performance

Its dustproof and waterproof construction complies with IP67 standards, allowing it to be used safely even in harsh environments such as sudden rain, submersion in water, or dusty locations.
IP67: Protects against dust intrusion and water even when submerged in water up to 1m deep for 30 minutes.

Drop resistance

It is drop-resistant and can withstand a fall from a height of 2m.

AC12V~ Wide mode

It has a wide mode that can detect voltages as low as approximately 12 V.

Operating Procedure

Touch the tip of the test probe to the insulated wire. When AC voltage is detected, a sound and LED will be emitted to let you know.

Wear protective insulation equipment when measuring or in areas where electric shock is expected.
The measurement target is coated wire.

Normal mode/wide mode

While you hold down the 12V button, the device will enter "wide mode," which also supports low voltages.

*The low voltage side voltage tester voltage of AC12V is a guideline. Please use a tester or similar device to measure the exact voltage value.

Other features

LED lighting image (tip side)

LED lighting image (bottom side)

Part names

Main unit

①Battery cap
② Rear LED light
③ Rear LED light button
④ Wide mode button
⑤Power button
⑥ Status display LED section
⑦ Test probe
8. Probe tip LED light
⑨Sensor detection part
⑩Waterproof ring (built-in)

360° rotating image

Clicking on the image will open a new window.

▲Back to top of page

specification

Electrical Performance

	Voltage detection range	frequency
AC detection voltage in normal mode	100 to 1000 V	50 to 60 Hz
AC detection voltage in wide mode	12 to 1000 V	50 to 60 Hz

General specifications

Auto Power Off	Approximately 5 minutes (cannot be canceled)
Operating temperature and humidity	0 to +50°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 80% RH or less (excluding batteries, no condensation)
size	Approx. W 24 × H 161 × D 29 mm
weight	Approximately 68 g (including batteries)
power supply	2 x AAA batteries
battery life	Approximately 30 hours (when using alkaline batteries)
accessories	operating instructions
proofreading	Not possible
Compliance standards	IEC 61010-1 CAT.IV 1000V
JAN	4983621100266

*Frequent use of the rear LED light will shorten the battery life.

Inquiry - CUSTOM Dustproof and waterproof AC voltage detector V-20WP

Name*

Email*

Contact Number*

Message (optional)