2
Share:
Specifications
SKU: Tohnichi CSPLD Torque Wrench
Tightening torque data captured when the wrench clicks at the set torque is transferred by cable. The Pass/Fail judgment is displayed on the body’s LED display for handy confirmation.
QH15D interchangeable head (sold separately) shown on the CSPLD100N3×15D model
When tightening torque pass/fail decision is OK.
When tightening torque Pass/Fail judgment is NG (No Good)
Configuration example: Tightening data management system using CSPLD torque wrench
Application
- Tightening torque data management
- Collects tightening torque data in work environments where an FD/FDD type of wireless torque wrench cannot be used.
Features
- CSPLD wired data transfer preset torque wrenches display tightening torque Pass/Fail judgments on the body’s LED display for easy, close-at-hand confirmation.
- The LED lamp indicates the tool to be used, letting the worker select the appropriate tool without hesitation. (* Separate management software is required to display this. Contact Tohnichi for more information.)
- Considerably more compact: Transmitter case size is only about 60% that on the older CSPD series.
- The curly design of the cord from the transmitter case improves workability, and places less load on the fixed end of the cord to inhibit fraying.
- The CSPLD series is compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.
Demonstration video
CSPLD Wired Data Transfer Preset Torque Wrench
Specifications
[N･m] |
||||||||||
[mm] |
||||||||||
Notes
-
If you need a calibration certificate, please specify the set torque. Tohnichi will issue a calibration certificate whether you purchase the CSPLD separately or purchase it together with the CD5 compact display.
-
The calibration certificate specifies the CSPLD operating torque, not the display torque.
-
The digital display must be calibrated against the operating torque. See the manual for instructions.
-
The new CD5 version is the 1.4, launched in January 2018. When connected to a CSPLD torque wrench, its LED lamps show Pass/Fail judgments.
-
For the CD5 version 1.3 and earlier, an AC adaptor (sold separately) is required for LED lamp Pass/Fail indications when connected to a CSPLD torque wrench. Contact Tohnichi for more information.
-
Products are compliant with ISO 6789:2017 starting January 2022. Calibration Certificates will be different from older products.
Standard accessory
Connector cable length: 3m
Inquiry - Tohnichi CSPLD Torque Wrench
