Linshang LS173 Colorimeter Price and Buying Guide Malaysia
Linshang LS173 Colorimeter Price and Buying Guide Malaysia
When searching for a Linshang LS173 Colorimeter price in Malaysia, it is tempting to compare instruments based only on the purchase price.
For industrial quality control, however, the more important question is whether the colorimeter is suitable for the actual sample, measurement method and QC requirement.
The Linshang LS173 Portable Colorimeter is designed for color measurement and color difference comparison. Its portable design, touch-screen operation and D/8 measurement geometry make it an option for manufacturers that need objective color data for routine quality control.
Before requesting a quotation, there are several important points buyers should consider.
What Is the Linshang LS173 Used For?
The LS173 can be considered for suitable color measurement applications involving:
Plastic components
Painted products
Coated surfaces
Printed materials
Packaging
Consumer products
Electrical and electronic housings
Automotive components
Other manufactured products
Typical users may include:
QA departments
QC departments
Production engineers
Incoming inspectors
Supplier quality engineers
R&D teams
The instrument can be particularly useful when a company needs to compare a production sample against an approved master.
Don't Buy a Colorimeter Based Only on Price
Two colorimeters may both be described as portable color measurement instruments but may not necessarily be suitable for the same application.
Before comparing prices, ask:
What exactly do we need to measure?
For example, a large flat painted panel and a small curved plastic component present different measurement conditions.
The lowest-priced instrument is not necessarily the most economical choice if it does not suit the sample.
What Is D/8 Measurement Geometry?
The Linshang LS173 uses D/8 optical geometry.
In simple terms, this refers to diffuse illumination with an 8-degree viewing geometry.
Controlled optical measurement helps provide more standardized color evaluation compared with relying entirely on visual inspection under changing lighting conditions.
This is useful for manufacturers that want more repeatable color comparison between different samples and production batches.
Do You Need Delta E Measurement?
One important requirement for many QC applications is Delta E (ΔE) color difference evaluation.
Delta E provides a numerical indication of the difference between two measured colors.
Generally:
Lower ΔE = smaller measured color difference
Higher ΔE = greater measured color difference
For example:
Approved Master → Measure
Production Sample → Measure
Compare → Review ΔE
This gives the QC team measurable information to support its inspection decision.
What Delta E Should Be Accepted?
There is no universal Delta E acceptance value suitable for every product.
The appropriate tolerance depends on factors such as:
Customer specifications
Material
Product application
Appearance requirements
Manufacturing capability
Internal QC standards
Buyers should therefore avoid choosing a colorimeter based on the assumption that one generic Delta E limit will solve every color QC problem.
The measurement procedure and acceptance criteria are equally important.
Consider Your Sample Size
Before buying the LS173, consider the physical size of the product you need to measure.
Ask:
Is the sample large enough for stable measurement?
Is there a suitable measurement area?
Is the sample flat?
Is it curved?
Is the surface irregular?
This is especially important for small plastic components and complex manufactured parts.
Consider Surface Texture
Surface characteristics can influence appearance and measurement repeatability.
Examples include:
Smooth plastic
Textured plastic
Painted metal
Coated surfaces
Printed paper
Fabric
Rough surfaces
If your material is highly textured or non-uniform, discuss the application before purchasing.
In some cases, multiple measurements or a specific measurement procedure may be necessary.
Color and Gloss Are Different
A common buying mistake is assuming that a colorimeter measures every aspect of surface appearance.
It does not.
A colorimeter measures color characteristics and color difference.
A gloss meter measures surface gloss.
For example, two black plastic parts can have similar color values but still look different because one is matte and the other is glossy.
If your QC problem involves both color and gloss, you may need separate instruments.
Color and Coating Thickness Are Different
For painted metal components, another parameter may be coating thickness.
A colorimeter does not replace a coating thickness gauge.
Depending on your application, your QC system may require:
Colorimeter → Color
Gloss Meter → Gloss
Coating Thickness Gauge → Coating Thickness
Understanding this before purchasing helps prevent buying the wrong instrument for the problem.
Consider Where the LS173 Will Be Used
The portable LS173 can be relevant at several stages of manufacturing.
Incoming Quality Control – IQC
Compare supplier components against the approved reference before releasing them to production.
In-Process Quality Control – IPQC
Measure samples during production to identify potential color drift.
Outgoing Quality Control – OQC
Check finished products before shipment.
For some companies, one portable instrument may support several QC departments depending on their workflow.
Consider Batch-to-Batch Measurement
If your company manufactures the same product repeatedly, long-term color consistency may be important.
For example:
January Batch → Master Comparison
April Batch → Master Comparison
July Batch → Master Comparison
October Batch → Master Comparison
Using the same approved reference can provide a more consistent method of evaluating repeated production.
Consider Supplier Quality Control
Companies sourcing the same component from several suppliers may also benefit from objective color measurement.
A useful approach is:
Approved Master → Supplier A
Approved Master → Supplier B
Approved Master → Supplier C
This is generally more meaningful than simply comparing Supplier A directly against Supplier B.
What Information Should You Provide When Asking for a Price?
When requesting an LS173 quotation, provide information about your application.
For example:
Product: Plastic housing
Color: Black
Surface: Slightly textured
Purpose: Compare supplier batches
Requirement: Delta E color difference measurement
Or:
Product: Painted metal panel
Purpose: Production QC
Reference: Customer-approved master sample
This information allows the supplier to understand what you are actually trying to measure.
Should You Send a Sample?
For unusual applications, providing photographs, dimensions or sample information can be helpful.
Important details include:
Material
Surface shape
Measurement area
Texture
Color
Required measurement
Customer specification
The goal is not simply to buy a colorimeter.
The goal is to buy a colorimeter that can support the intended QC process.
Why Local Technical Support Matters
For industrial instruments, the lowest online price does not always represent the lowest total cost.
Buying from a local supplier can make it easier to discuss:
Product suitability
Measurement applications
Model selection
QC requirements
Technical questions
This can be especially useful for companies introducing instrumental color measurement for the first time.
Is the Linshang LS173 Worth Buying?
The LS173 may be worth considering if your company regularly faces situations such as:
“The supplier says the color is the same, but our QC says it is different.”
“Different production batches don't match.”
“We need a numerical way to compare color.”
“The customer requires more consistent color QC.”
“Visual inspection is too subjective.”
In these situations, a portable colorimeter can provide useful objective measurement data.
Choosing Based on Application, Not Price Alone
A better purchasing sequence is:
Application → Sample → Measurement Requirement → Instrument Selection → Price Comparison
rather than:
Price → Buy → Test Whether It Works
This approach reduces the risk of purchasing an instrument that does not match the actual application.
Linshang LS173 Colorimeter Price Malaysia
MTM Precision supplies industrial testing and measurement instruments for manufacturing, engineering and quality control applications throughout Malaysia.
For the latest Linshang LS173 price and quotation in Malaysia, contact MTM Precision with information about your application and sample.
Our team can assist you in evaluating whether the LS173 is appropriate for your color measurement requirements.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Looking for Linshang LS173 Colorimeter price in Malaysia? Contact MTM Precision for the latest quotation, product information and application enquiries.
12 Aug 2026