Where to Buy Linshang LS173 Portable Colorimeter in Malaysia
Where to Buy Linshang LS173 Portable Colorimeter in Malaysia
If you are looking for a Linshang LS173 Portable Colorimeter in Malaysia, choosing the right instrument should involve more than simply comparing prices.
Before purchasing a colorimeter, it is important to understand what material you need to measure, whether you need color difference and Delta E comparison, and how the instrument will be incorporated into your quality control process.
The Linshang LS173 is a portable D/8 colorimeter designed for color measurement and color difference evaluation, making it suitable for various industrial quality control applications.
MTM Precision supplies Linshang color measurement instruments in Malaysia and can assist customers in evaluating the LS173 for their application.
Who Should Consider the Linshang LS173?
The LS173 may be considered by companies involved in:
Manufacturing
Plastic injection molding
Paint and coating
Printing
Packaging
Automotive components
Electrical and electronic products
Furniture manufacturing
Consumer products
General industrial quality control
Typical users include QA/QC personnel, production engineers, incoming inspectors, supplier quality engineers and R&D teams.
What Can the LS173 Be Used For?
One of the main applications of a portable colorimeter is comparing a production sample against an approved reference.
For example:
Approved Master Sample → Measure
Production Sample → Measure
Compare Color Difference → Review QC Criteria
This provides a more objective method of evaluating color consistency than relying entirely on visual judgement.
Delta E Color Difference Measurement
Delta E (ΔE) is commonly used to describe the measured difference between two colors.
Generally:
Lower ΔE = smaller color difference
Higher ΔE = greater color difference
For manufacturing QC, this can help companies establish measurable procedures for comparing samples.
However, buyers should not assume that one Delta E tolerance is suitable for every application.
The appropriate acceptance criteria depend on the product, material, customer specification and internal quality requirements.
Why D/8 Matters
The Linshang LS173 uses D/8 optical geometry, referring to diffuse illumination with an 8-degree viewing geometry.
Controlled measurement geometry is important because visual color evaluation can be affected by lighting conditions and differences between observers.
Instrumental measurement provides a more standardized approach for suitable sample comparison.
Before Buying: What Material Are You Measuring?
This should be one of the first questions.
Tell your supplier whether you need to measure:
Plastic
Painted metal
Coated surfaces
Printed materials
Packaging
Labels
Fabric or textile samples
Consumer product components
Other colored materials
Different surfaces can behave differently during color measurement.
Providing the actual application helps determine whether the LS173 is appropriate.
Consider the Sample Size and Shape
Do not select a colorimeter based only on specifications or price.
Consider whether your sample is:
Flat
Curved
Large
Small
Smooth
Textured
Uniform
Irregular
The physical characteristics of the sample can affect how easily and consistently it can be measured.
For unusual components, discuss the sample with the supplier before purchasing.
Do You Have an Approved Master Sample?
A portable colorimeter becomes particularly useful when a company has an established reference.
Examples include:
Customer-approved sample
Golden sample
Master plastic part
Standard painted panel
Approved packaging
Approved printed sample
New samples can then be compared against the same reference.
This is particularly useful for repeated production and supplier quality control.
LS173 for Incoming Quality Control
Companies purchasing colored components from suppliers can use the LS173 as part of Incoming Quality Control (IQC).
A typical process may be:
Supplier Delivery → Sampling → Color Measurement → Compare with Master → Accept / Hold / Investigate
This can help identify potential color problems before materials enter production.
LS173 for Production Quality Control
Color measurement can also be incorporated into In-Process Quality Control (IPQC).
Instead of waiting until production is completed, samples can be measured periodically:
First-Off Sample → Check
Mid-Production → Check
Final Sample → Check
This can help identify color drift earlier and reduce the risk of producing a large quantity of questionable products.
LS173 for Outgoing Quality Control
Before shipment, finished products can be checked against the approved reference again.
This is particularly useful when customers have specific appearance requirements.
A strong color QC workflow can therefore become:
IQC → IPQC → OQC
The same measurement principle can support color control throughout the manufacturing process.
Supplier Comparison
The LS173 may also help companies that source the same component from multiple suppliers.
Instead of asking:
“Which supplier looks closest?”
each supplier can be evaluated against the same approved master:
Master → Supplier A
Master → Supplier B
Master → Supplier C
This creates a more consistent basis for supplier quality evaluation.
Colorimeter vs Gloss Meter
Before purchasing, make sure the problem you need to solve is actually related to color.
A colorimeter evaluates color and color difference.
A gloss meter evaluates surface gloss.
Two samples may have similar colors but look different because their gloss levels are different.
If both color and gloss are part of your quality specification, separate measurements may be required.
Colorimeter vs Coating Thickness Gauge
For painted products, another common requirement is coating thickness.
A colorimeter measures color.
A coating thickness gauge measures the thickness of the applied coating.
These are different QC parameters.
For some manufacturing applications, all three may matter:
Color + Gloss + Coating Thickness
The correct instrument depends on what your customer or internal specification requires.
Why Buy from a Local Supplier in Malaysia?
For industrial measuring instruments, purchasing locally can provide advantages beyond delivery.
Customers may need assistance with:
Product selection
Application discussion
Model comparison
Sample suitability
Technical information
Future measurement requirements
Choosing the correct instrument before purchase can be more valuable than selecting a model purely because it has the lowest online price.
Questions to Ask Before Ordering the LS173
Before requesting a quotation, prepare information such as:
What material do you need to measure?
What is the sample size?
Is the surface flat or curved?
Is the surface glossy or textured?
Do you need Delta E comparison?
Do you have an approved master sample?
What tolerance does your customer require?
Will the instrument be used for IQC, IPQC or OQC?
How frequently will measurements be performed?
These details can help determine whether the LS173 matches the intended application.
Linshang LS173 Supplier in Malaysia
MTM Precision supplies testing and measurement instruments for Malaysian manufacturers, engineering companies, QA/QC departments and industrial users.
If you are considering the Linshang LS173 Portable Colorimeter, contact us with details of your application.
Our team can assist you in evaluating the instrument for suitable color measurement and quality control requirements.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Looking to buy the Linshang LS173 Portable Colorimeter in Malaysia? Contact MTM Precision for quotation, product information and application enquiries.
12 Aug 2026
