TENMARS TM-207 Applications: Solar PV, Glass, Automotive and Building Malaysia
TENMARS TM-207 Applications: Solar PV, Glass, Automotive and Building Malaysia
The TENMARS TM-207 Solar Power Meter is more than an instrument for checking sunlight.
By measuring solar radiation intensity in W/m², it can support several practical applications including solar PV assessment, window film comparison, automotive tint testing, building inspection and energy-efficiency investigations.
For contractors, engineers and technical teams in Malaysia, understanding these applications can help determine whether a solar power meter is useful for their work.
What Is the TENMARS TM-207?
The TENMARS TM-207 is a portable solar power meter designed for measuring solar radiation.
Key measurement capabilities include:
Solar radiation measurement up to 1999 W/m²
W/m² measurement
BTU/(ft²·h) measurement
Approximately 400–1100 nm spectral response
Portable handheld operation
Its main advantage is the ability to provide an actual numerical measurement of solar radiation rather than relying only on visual judgement.
Application 1: Solar PV Site Assessment
One of the most obvious applications is solar photovoltaic installation.
Before installing solar panels, contractors may want to compare solar exposure at different areas of a property.
Possible measurement locations include:
Residential rooftops
Factory roofs
Warehouses
Commercial buildings
Car parks
Open land
The TM-207 can provide quick W/m² readings at these locations.
This allows technicians to compare actual solar irradiance under the conditions present during the inspection.
Application 2: Solar Panel Position Comparison
Solar radiation received by a surface changes according to its orientation relative to incoming sunlight.
Technicians can use the TM-207 to compare readings at different positions or angles.
This can provide useful supporting information when assessing potential solar panel locations.
The instrument should be considered a field measurement tool rather than a replacement for professional PV system design software or long-term solar resource data.
Application 3: Solar PV Troubleshooting
Solar irradiance measurement can also be useful when inspecting an existing solar PV installation.
If system output appears lower than expected, technicians may investigate:
Solar irradiance
Shading
Dirty panels
Panel temperature
Wiring
Connections
Inverter performance
Electrical faults
The TM-207 helps determine the solar radiation conditions present during testing.
This can provide useful context when interpreting other electrical measurements.
Application 4: Window Tint Testing
Automotive tint installers can use the TM-207 for comparative demonstrations.
A reading can be taken without the solar film between the source and sensor, followed by another reading after solar radiation passes through the tinted glass.
For example:
Reference: 900 W/m²
Behind tinted glass: 450 W/m²
This makes the change easier for customers to understand.
The TM-207 does not replace dedicated VLT, UV or IR transmission meters, but it can provide useful broad solar radiation comparison.
Application 5: Solar Control Film
Solar control film is widely used on commercial and residential buildings.
Possible locations include:
Offices
Factories
Showrooms
Hotels
Hospitals
Schools
Shop lots
Residential properties
The TM-207 can be used for before-and-after solar radiation measurements when evaluating window film installations.
This gives contractors a practical way to demonstrate changes under comparable test conditions.
Application 6: Building Glass Comparison
Different glazing materials can affect the amount of solar radiation reaching the interior of a building.
Users may compare:
Clear glass
Tinted glass
Reflective glass
Laminated glass
Solar control glazing
Glass with window film
The TM-207 can measure the solar radiation reaching the sensor after passing through each material.
This is useful for comparative field assessment.
Application 7: Building Energy Efficiency
Solar radiation entering a building can contribute to heat gain and cooling demand.
Facility and energy-management teams can use solar irradiance measurement as part of investigations involving:
Window orientation
Glass façades
Solar control film
Shading
HVAC load
Indoor thermal conditions
The TM-207 does not provide a complete building energy analysis by itself, but its readings can complement other measurements.
Application 8: Facility Management
A facility manager may notice that one section of a building becomes hotter than another during certain periods.
Possible causes can include differences in:
Solar exposure
Window orientation
Glazing
Shading
Air-conditioning
Airflow
Solar radiation measurements allow the facility team to check whether solar exposure is one contributing factor.
Application 9: Energy Audit and Sustainability Projects
Energy-efficiency and sustainability projects often require measurements rather than assumptions.
Depending on the project, engineers may measure:
Electrical power
Temperature
Humidity
Airflow
Lighting
Solar radiation
The TM-207 can provide the solar irradiance component of this broader assessment.
This can also be relevant to companies working on energy-efficiency and ESG-related improvement programmes.
Application 10: Education and Training
Solar radiation is an important subject in:
Renewable energy courses
Electrical engineering
Building science
Environmental studies
Solar PV training
The TM-207 can allow students to perform practical experiments such as comparing:
Sunny and shaded locations
Different sensor angles
Different times of day
Glass materials
Solar film samples
This converts theoretical solar-energy concepts into measurable field data.
Why Use W/m² Instead of Judging Sunlight Visually?
The human eye is very good at detecting brightness.
It is not a solar irradiance meter.
Two conditions that appear similarly bright may produce different radiation measurements.
This is why users working with solar energy should understand the difference between:
Visible illuminance → Lux
and
Solar irradiance → W/m²
For solar radiation applications, the TM-207 provides the relevant W/m² measurement.
Who Should Consider the TENMARS TM-207?
The instrument can be relevant to:
Solar PV installers
Electrical contractors
Solar maintenance companies
Energy consultants
Facility managers
Building engineers
HVAC contractors
Automotive tint shops
Window film installers
Glass suppliers
Sustainability teams
Universities and colleges
One Instrument, Multiple Applications
The value of the TENMARS TM-207 is not limited to one industry.
A solar contractor may use it to measure rooftop irradiance.
A tint installer may use it to demonstrate solar radiation reduction.
A building engineer may use it to compare glazing.
A facility manager may use it when investigating solar heat gain.
All of these applications begin with the same question:
How much solar radiation is reaching this surface?
The TENMARS TM-207 Solar Power Meter provides a straightforward way to obtain that measurement.
Looking for TENMARS TM-207 Solar Power Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for solar PV, building, automotive, environmental, electrical and industrial applications.
Contact us for TENMARS TM-207 Solar Power Meter pricing, availability and product information in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026