How to Test Solar Heat Transmission Through Glass Using TENMARS TM-207 Malaysia
How to Test Solar Heat Transmission Through Glass Using TENMARS TM-207 Malaysia
Glass may look transparent, tinted or reflective, but appearance alone does not tell you how much solar radiation reaches the other side.
For building glass, automotive windows and solar control film applications, a practical before-and-after measurement can help users compare how different materials affect incoming solar radiation.
The TENMARS TM-207 Solar Power Meter provides a portable solution for this type of comparative testing by displaying solar radiation measurements in W/m².
Why Test Solar Radiation Through Glass?
Solar radiation passing through glass can contribute to indoor heat gain.
This is particularly relevant for:
Office windows
Shopfronts
Factory buildings
Residential properties
Automotive glass
Skylights
Glass façades
Solar control film
Different glass and film combinations can produce different results.
Instead of judging performance only by appearance, users can take actual solar radiation measurements.
What Does the TENMARS TM-207 Measure?
The TENMARS TM-207 is designed for solar radiation measurement.
It offers a measurement range up to 1999 W/m² and can display readings in:
W/m²
BTU/(ft²·h)
Its spectral response is approximately 400–1100 nm.
This makes it useful for comparative solar radiation measurements involving glass and transparent materials.
Step 1: Establish a Reference Measurement
Start by measuring the incoming solar radiation without the test glass or film between the solar source and sensor.
For example:
Reference reading: 950 W/m²
Record the result.
This becomes the reference value for comparison.
Step 2: Measure Behind the Glass
Place the sensor behind the glass while maintaining measurement conditions as consistently as possible.
For example:
Reading behind glass: 650 W/m²
The difference indicates that less measured solar radiation is reaching the sensor after passing through the glass.
Step 3: Test Glass with Solar Film
The same method can be used after applying solar control film.
For example:
Reference: 950 W/m²
Standard glass: 650 W/m²
Glass + solar film: 400 W/m²
These numbers are only an example, but they demonstrate how comparative testing can make the effect easier to understand.
Step 4: Compare Different Glass Types
The TM-207 can also be used for side-by-side comparisons.
Possible materials include:
Clear glass
Tinted glass
Reflective glass
Laminated glass
Solar control glass
Glass with window film
Different solar film samples
Testing under similar conditions allows users to compare how much solar radiation reaches the sensor behind each sample.
Can You Calculate a Simple Transmission Ratio?
For comparative purposes, users may calculate:
Transmission Ratio (%) = Reading Behind Glass ÷ Reference Reading × 100
For example:
Reference = 1,000 W/m²
Behind glass = 600 W/m²
Transmission ratio:
600 ÷ 1,000 × 100 = 60%
This means the meter measured approximately 60% of the reference solar radiation behind the material under those specific test conditions.
However, this simple field comparison should not automatically be treated as an official certified solar transmittance value.
Laboratory testing and relevant standards may use controlled equipment, defined wavelengths and specific test procedures.
Why Measurement Conditions Matter
Solar radiation can change quickly.
Measurements can be affected by:
Passing clouds
Time of day
Sensor angle
Glass angle
Distance and positioning
Shadows
Reflections
Environmental conditions
For meaningful comparisons, reference and test readings should be taken as close together in time as possible and with consistent positioning.
Automotive Glass Applications
For automotive applications, the TM-207 can help demonstrate differences between:
Untinted glass
Existing tint
New tint
Different solar film grades
Different vehicle windows
This can be particularly useful for tint shops that want to provide customers with a simple visual demonstration.
Instead of only discussing film specifications, the installer can show actual changes in W/m² readings.
Building Glass Applications
Commercial buildings often contain large glazed areas.
Solar radiation through these surfaces may contribute to indoor heat gain and cooling demand.
Potential applications include:
Building inspection
Energy audits
Facility management
HVAC investigations
Window film evaluation
Green building projects
Building retrofit assessment
Solar radiation measurement can therefore provide useful supporting information when evaluating glazing and solar-control solutions.
Solar Radiation Is Different from Visible Light
A glass panel may look dark but that does not mean a lux meter can replace a solar power meter.
Lux meters measure visible illuminance according to the response of the human eye.
Solar power meters measure radiation intensity.
The two measurements answer different questions.
For solar radiation comparison, W/m² is the more relevant measurement.
Is TM-207 a Dedicated Glass Certification Instrument?
No.
The TM-207 is a portable solar power meter.
It should not be presented as a replacement for laboratory spectrophotometers or dedicated certified glass transmission testing systems.
Its strength is practical comparative field measurement.
This distinction is important for professional users who need to understand what the instrument can—and cannot—tell them.
Who Can Use the TENMARS TM-207?
The instrument may be useful for:
Glass suppliers
Window film installers
Automotive tint shops
Building contractors
Facility managers
Energy consultants
HVAC contractors
Building inspectors
Engineering companies
Universities and technical colleges
Supporting Energy Efficiency and ESG Projects
Energy efficiency is becoming increasingly important for commercial and industrial facilities.
Reducing unwanted solar heat gain can form part of broader efforts involving:
Building energy efficiency
Cooling-load management
Energy audits
Green building initiatives
Sustainability programmes
ESG-related energy improvement projects
Measurement instruments such as the TENMARS TM-207 can provide field data to support preliminary investigation and before-and-after comparisons.
Turn an Invisible Effect into a Measurable Result
Solar radiation cannot be judged accurately by simply touching the glass or looking at how dark it appears.
A solar power meter provides an actual measurement.
With the TENMARS TM-207, users can compare solar radiation before and after glass or solar film and express the difference in W/m².
For glass suppliers, window film professionals and building engineers in Malaysia, this provides a straightforward way to make solar radiation assessment more measurable.
Looking for TENMARS TM-207 Solar Power Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for solar, building, environmental, automotive and industrial applications.
Contact us for TENMARS TM-207 Solar Power Meter product information, pricing and availability in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026