Solar Irradiance Measurement for Building and Energy Efficiency Assessment Malaysia
Solar Irradiance Measurement for Building and Energy Efficiency Assessment Malaysia
Solar radiation affects more than solar PV systems.
For commercial buildings, factories, offices and residential properties, sunlight entering through windows and striking exposed building surfaces can influence indoor heat gain, cooling requirements and overall building energy performance.
The TENMARS TM-207 Solar Power Meter provides a portable method for measuring solar irradiance in W/m², making it useful for preliminary building assessment, glazing comparison, solar control evaluation and energy-efficiency investigations.
Why Solar Radiation Matters for Buildings
Malaysia's tropical climate means many buildings experience strong solar exposure throughout the year.
Solar radiation can affect:
Windows and glass façades
Building walls
Rooftops
Skylights
Indoor areas near windows
Air-conditioning demand
Indoor thermal comfort
Large glazed surfaces can be particularly important because solar radiation entering through glass may contribute to indoor heat gain.
Measuring solar radiation can therefore provide useful supporting information during building and energy assessments.
What Does the TENMARS TM-207 Measure?
The TENMARS TM-207 is designed to measure solar radiation intensity.
It can measure up to:
1999 W/m²
Readings can be displayed in:
W/m²
BTU/(ft²·h)
Its spectral response is approximately 400–1100 nm.
The portable design allows technicians to move between different areas of a building and compare solar radiation under actual site conditions.
Compare Different Sides of a Building
Different sides of the same building can experience very different solar exposure.
For example, an engineer may take measurements around:
East-facing windows
West-facing windows
North-facing areas
South-facing areas
Rooftop locations
Shaded sections
Comparing these readings can help identify areas experiencing stronger solar radiation at the time of inspection.
This information may be useful when investigating heat-related complaints or planning further energy-efficiency improvements.
Evaluating Glass and Window Film
One practical application of the TM-207 is comparing solar radiation before and after it passes through glass.
Measurements can be taken:
Outside / Reference → Glass → Indoor Side
The same approach can be used when evaluating solar control film.
For example:
Before film installation: higher measured solar radiation
After film installation: lower measured solar radiation under comparable conditions
This provides a straightforward before-and-after comparison.
Building Retrofit Assessment
Existing buildings may undergo energy-efficiency improvements such as:
Installing solar control film
Replacing glazing
Adding external shading
Installing blinds
Improving insulation
Upgrading HVAC systems
Installing rooftop solar PV
Solar irradiance measurements can provide additional field information during these projects.
The TM-207 is particularly useful when the objective is to make quick comparative measurements rather than establish a permanent monitoring system.
HVAC Investigation
Solar heat gain can contribute to the cooling load of a building.
For example, occupants may report that one section of an office becomes significantly hotter during certain parts of the day.
A facility or HVAC team can investigate several factors, including:
Solar exposure
Window orientation
Glazing
Window film
Air-conditioning performance
Airflow
Indoor temperature
Humidity
Solar irradiance measurement adds another useful parameter to the investigation.
Facility Management Applications
Facility managers are increasingly expected to understand why certain areas consume more energy or experience different environmental conditions.
A portable solar power meter can be useful for quick checks around:
Factories
Warehouses
Office buildings
Shopping centres
Hospitals
Hotels
Schools
Universities
Government buildings
The instrument can be carried to different areas and used to compare actual solar exposure.
Solar Irradiance and Energy Audits
A professional energy audit normally considers many parameters.
Depending on the project, these may include:
Electricity consumption
Power demand
Lighting
HVAC performance
Temperature
Humidity
Airflow
Thermal imaging
Building envelope condition
Solar exposure
The TENMARS TM-207 does not replace a complete building energy audit.
Instead, it provides an additional field measurement that may help explain how solar exposure differs around the building.
Supporting Green Building Projects
Green building and sustainability projects increasingly focus on reducing unnecessary energy consumption while maintaining suitable indoor conditions.
Solar radiation can be relevant when assessing:
Building orientation
Glazing
Shading
Window film
Cooling requirements
Rooftop solar potential
Being able to measure rather than simply estimate site conditions can improve preliminary investigations.
Solar Irradiance and ESG
Energy efficiency is also connected to broader corporate sustainability and ESG initiatives.
Commercial and industrial facilities may seek to:
Reduce electricity consumption
Improve energy efficiency
Reduce cooling demand
Increase renewable energy use
Install solar PV
Improve environmental performance
Measurement instruments help turn improvement projects into measurable engineering activities.
The TM-207 can support specific solar radiation assessments within these wider initiatives.
TM-207 for Solar PV and Building Assessment
One advantage of the TENMARS TM-207 is that the same instrument can support several related applications.
Solar PV
Measure and compare solar irradiance at potential installation locations.
Building Glass
Compare solar radiation before and after glazing.
Solar Film
Perform before-and-after comparative measurements.
Building Exposure
Compare solar radiation around different sides of a property.
Energy Investigation
Add solar irradiance information to a broader building energy assessment.
This makes the instrument relevant beyond dedicated solar PV contractors.
Who Can Use the TENMARS TM-207?
Potential users include:
Facility managers
Energy managers
Building engineers
HVAC contractors
Energy consultants
Solar PV contractors
Building inspectors
Window film companies
Glass suppliers
Sustainability teams
Universities and technical institutions
Measurement Is Better Than Assumption
A west-facing glass façade may feel hot in the afternoon.
A rooftop may appear suitable for solar PV.
A solar film may claim to reduce incoming solar energy.
These observations can be useful, but measurement provides additional evidence.
With the TENMARS TM-207 Solar Power Meter, users can obtain solar radiation readings in W/m² and compare different locations or conditions directly.
For building, energy-efficiency and solar applications in Malaysia, this makes the TM-207 a useful portable measurement tool.
Looking for TENMARS TM-207 Solar Power Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for building, HVAC, solar PV, environmental, electrical and industrial applications.
Contact us for TENMARS TM-207 Solar Power Meter product information, pricing and availability in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026