TENMARS TM-207 for Window Tint and Solar Film Testing Malaysia

TENMARS TM-207 for Window Tint and Solar Film Testing Malaysia

 

Window tint and solar control film are designed to reduce the amount of solar energy entering through glass. But how can installers demonstrate the difference between untreated glass and glass fitted with solar film?

 

The TENMARS TM-207 Solar Power Meter provides a practical method for comparing solar radiation before and after it passes through glass, automotive tint or solar control film.

 

With measurements displayed in W/m², users can demonstrate the difference using actual readings instead of relying only on how dark or reflective a film appears.

 

Window Tint Is Not Only About Darkness

 

A common assumption is that darker window tint automatically means better solar protection.

 

However, visible darkness and solar radiation are not the same measurement.

 

Different films may be designed for:

 

Visible light control

 

Solar energy reduction

 

UV protection

 

Privacy

 

Glare reduction

 

Heat control

 

Therefore, visual appearance alone does not provide a direct measurement of incoming solar radiation.

 

A solar power meter gives installers another way to demonstrate performance under actual test conditions.

 

How TENMARS TM-207 Can Be Used

 

The TENMARS TM-207 measures solar radiation intensity up to 1999 W/m².

 

It displays measurements in:

 

W/m²

 

BTU/(ft²·h)

 

Its spectral response is approximately 400–1100 nm.

 

For comparative testing, users can take a reference reading and then compare it with the solar radiation measured after the sunlight passes through the glass or film.

 

Basic Window Film Comparison

 

A simple comparative test can be performed as follows.

 

Step 1: Take a Reference Reading

 

Measure the solar radiation under the selected test condition without the film blocking the sensor.

 

Record the W/m² value.

 

Step 2: Measure Behind the Glass or Film

 

Position the sensor behind the window glass, tinted glass or solar film.

 

Take another measurement.

 

Step 3: Compare the Results

 

Compare the two readings.

 

For example:

 

Reference solar radiation: 900 W/m²

After glass / solar film: 450 W/m²

 

The second reading is lower under those test conditions, providing a simple demonstration of the reduction in measured solar radiation reaching the sensor.

 

Useful for Automotive Window Tint

 

Automotive tint shops often need to explain the difference between various tinting products.

 

Customers may find technical film specifications difficult to understand.

 

A live demonstration can make the concept easier.

 

The TM-207 can be used to compare:

 

Untreated automotive glass

 

Existing window tint

 

Different tint samples

 

Solar control film

 

Different film grades

 

The customer can see the measured difference directly on the instrument.

 

Useful for Building Window Film

 

Solar film is also widely used in commercial and residential buildings.

 

Applications include:

 

Office buildings

 

Shop lots

 

Factories

 

Showrooms

 

Hotels

 

Hospitals

 

Schools

 

Residential properties

 

Large glass surfaces can allow significant solar energy into a building.

 

Window film suppliers and building professionals can use solar radiation measurements as part of an on-site comparison or demonstration.

 

Solar Film and Building Energy Efficiency

 

Solar radiation entering through windows contributes to heat gain inside buildings.

 

Reducing solar energy transmission through glazing may form part of a broader building energy-management strategy.

 

This makes solar radiation measurement relevant to:

 

Facility management

 

Building energy assessment

 

HVAC investigations

 

Green building projects

 

Energy efficiency projects

 

Solar control film evaluation

 

The TM-207 provides portable field measurements that can support these assessments.

 

Solar Power Meter vs Lux Meter for Window Film

 

These instruments should not be confused.

 

A lux meter measures visible illuminance based on human visual response.

 

A solar power meter measures solar radiation intensity.

 

Therefore, a film that changes visible brightness does not necessarily produce the same proportional change in measured solar radiation.

 

If the objective is to compare solar radiation, a solar power meter such as the TM-207 is the more appropriate type of instrument.

 

Solar Power Meter vs Professional Film Tester

 

The TM-207 should also not be confused with a dedicated automotive window film transmission meter.

 

Professional film meters may separately measure parameters such as visible light transmission, UV transmission or infrared transmission.

 

The TM-207 instead provides a broad solar radiation measurement within its specified spectral response.

 

Therefore, it is particularly useful for before-and-after solar radiation comparison, rather than replacing every specialized glass or film testing instrument.

 

Why Demonstration Can Help Sales

 

For window tint and solar film businesses, technical specifications alone may not always convince a customer.

 

A practical demonstration can be easier to understand.

 

Instead of simply saying:

 

“This film reduces solar energy.”

 

The installer can show:

 

Before: ___ W/m²

After: ___ W/m²

 

This turns an invisible effect into a measurable comparison.

 

Who Can Use the TENMARS TM-207?

 

Potential users include:

 

Automotive tint shops

 

Window film installers

 

Solar film suppliers

 

Building contractors

 

Glass suppliers

 

Facility managers

 

Energy consultants

 

Building inspectors

 

HVAC professionals

 

Engineering departments

 

The handheld design makes the TM-207 convenient for showroom demonstrations and field testing.

 

Important: Keep Test Conditions Consistent

 

Solar radiation changes continuously.

 

Cloud movement, time of day, sensor position and measurement angle can affect the reading.

 

When comparing two materials, measurements should therefore be taken under conditions that are as similar as possible.

 

For controlled product comparison, users should also follow the relevant film or glass testing standard where applicable.

 

A Practical Tool for Solar Film Demonstration

 

Customers cannot see solar radiation directly.

 

But they can understand numbers.

 

The TENMARS TM-207 Solar Power Meter allows window tint, glass and solar film professionals to convert solar radiation into a measurable W/m² reading.

 

For demonstrations, comparative testing and field assessment, this provides a simple way to show the effect of glass and solar control materials.

 

Looking for TENMARS TM-207 Solar Power Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement equipment for solar, automotive, building, environmental and industrial applications.

 

For TENMARS TM-207 Solar Power Meter enquiries, pricing and availability in Malaysia, contact our team.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026