How to Measure High Gloss Surfaces with Linshang LS196 Gloss Meter Malaysia

How to Measure High Gloss Surfaces with Linshang LS196 Gloss Meter Malaysia

 

Measuring a high-gloss surface can be more demanding than checking an ordinary painted or plastic surface. Highly polished and reflective materials may produce very high gloss readings, so selecting an instrument with a suitable measurement range is important.

 

The Linshang LS196 Gloss Meter uses a 60° measurement angle and offers a wide measurement range of 0–1000 GU, making it suitable for both general and high-gloss surface inspection.

 

What Is a High-Gloss Surface?

 

Gloss describes how strongly a surface reflects light in a specular direction.

 

Typical high-gloss materials may include:

 

Polished metal

 

Electroplated components

 

High-gloss automotive paint

 

Glossy plastic

 

Polished ceramic

 

High-gloss furniture coatings

 

Polished stone

 

Decorative coatings

 

These surfaces can appear very shiny to the human eye, but visual inspection alone cannot provide an objective gloss value.

 

A gloss meter converts the measurement into a numerical Gloss Unit (GU) reading.

 

Why Use the Linshang LS196 for High Gloss?

 

One of the key features of the LS196 is its measurement range up to 1000 GU.

 

This wider range is useful when testing surfaces with very strong reflection.

 

For companies handling different materials, it also reduces the possibility of selecting a gloss meter with insufficient range for a particular high-gloss application.

 

Step 1: Check the Measurement Surface

 

Before measuring, inspect the sample.

 

The measurement area should be:

 

Clean

 

Dry

 

Flat enough for proper instrument placement

 

Free from fingerprints

 

Free from dust

 

Free from oil contamination

 

Surface contamination can affect gloss readings, especially on highly reflective materials.

 

Step 2: Check and Calibrate the Gloss Meter

 

Before conducting important measurements, ensure the instrument is operating correctly and perform calibration according to the manufacturer's procedure when required.

 

Proper calibration helps maintain measurement consistency.

 

This is especially important for QA/QC applications where results from different production batches need to be compared.

 

Step 3: Place the LS196 Correctly

 

Position the LS196 firmly against the measurement surface.

 

The measuring aperture should have proper contact with the sample.

 

Avoid tilting or moving the instrument during measurement because changes in positioning can affect the reading.

 

Step 4: Take Multiple Measurements

 

A single measurement may not represent the entire product surface.

 

For production inspection, consider measuring several locations.

 

For example:

 

Point 1: Left side

Point 2: Centre

Point 3: Right side

 

For larger components, additional measurement points may be necessary.

 

Multiple measurements can help identify uneven polishing, coating variation or differences across the surface.

 

Step 5: Compare the Results

 

Do not evaluate gloss values in isolation.

 

Whenever possible, establish an approved reference sample or acceptable gloss specification.

 

Production measurements can then be compared against this reference.

 

For example, a manufacturer may establish an acceptable gloss range for a particular product. Products outside that range can then be investigated before shipment.

 

Use QC Mode for Production Inspection

 

The Linshang LS196 includes a QC mode that can be useful for repetitive inspection.

 

By establishing appropriate limits, operators can more quickly determine whether the measured product meets the required gloss specification.

 

This is useful for:

 

Incoming inspection

 

Production line checks

 

Final inspection

 

Supplier evaluation

 

Batch comparison

 

Why Can High-Gloss Readings Vary?

 

If measurements are inconsistent, do not immediately assume that the gloss meter is faulty.

 

Variations can result from:

 

Different measurement locations

 

Fingerprints or contamination

 

Surface scratches

 

Uneven polishing

 

Coating thickness variation

 

Instrument positioning

 

Surface curvature

 

Production variation

 

For reliable comparison, measurement conditions should remain as consistent as possible.

 

Record Your Measurement Data

 

For professional QA/QC applications, measurement records are valuable.

 

The LS196 supports computer connection and data transmission, allowing measurement results to be managed and exported for further analysis.

 

Keeping records makes it easier to compare:

 

Different batches

 

Different suppliers

 

Different production lines

 

Before and after polishing

 

Before and after coating process changes

 

Over time, this information can help manufacturers identify production trends rather than simply accepting or rejecting individual samples.

 

Suitable for Malaysian Industrial Applications

 

The Linshang LS196 can be used by Malaysian companies involved in:

 

Automotive components

 

Paint and coatings

 

Plastic manufacturing

 

Metal finishing

 

Electroplating

 

Furniture

 

Ceramic products

 

Stone processing

 

Industrial manufacturing

 

QA/QC inspection

 

Its combination of 60° measurement geometry and 0–1000 GU range makes it especially useful where both conventional and very high-gloss surfaces may need to be inspected.

 

Looking for Linshang LS196 Gloss Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for industrial, manufacturing and QA/QC applications.

 

Contact us with details of the material you need to measure, and our team can assist you in selecting a suitable gloss measurement solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026