Linshang LS196 Gloss Meter for Plastic Surface Quality Inspection Malaysia

Linshang LS196 Gloss Meter for Plastic Surface Quality Inspection Malaysia

 

Surface appearance is an important quality factor for many plastic products. Even when the colour and dimensions are correct, differences in surface gloss can make plastic components appear inconsistent.

 

The Linshang LS196 Gloss Meter provides an objective method for measuring surface gloss instead of relying only on visual inspection.

 

With a 60° measurement angle and a wide 0–1000 GU measurement range, the LS196 is suitable for general plastic inspection as well as highly glossy plastic surfaces.

 

Why Measure Gloss on Plastic Products?

 

Plastic surface gloss can be affected by many factors during manufacturing, including:

 

Resin formulation

 

Mold surface condition

 

Injection molding parameters

 

Processing temperature

 

Surface texture

 

Additives

 

Coating

 

Polishing

 

Production batch variation

 

A change in any of these conditions may affect the final appearance.

 

For manufacturers producing large quantities of plastic components, gloss measurement provides a numerical reference for monitoring consistency.

 

Applications of LS196 in the Plastic Industry

 

The Linshang LS196 can be used for surface inspection of many plastic products, including:

 

Automotive interior components

 

Automotive exterior plastic parts

 

Consumer electronics housings

 

Household appliances

 

Plastic panels

 

Packaging materials

 

ABS components

 

Injection-molded parts

 

Coated plastic products

 

High-gloss decorative plastics

 

It can be used during incoming inspection, production monitoring and final quality control.

 

Detect Mold and Process Differences

 

Injection molds can influence the appearance of finished plastic components.

 

For example, components produced from different mold cavities may have slightly different surface gloss.

 

Visual inspection may not always identify these differences consistently.

 

A gloss meter allows QA/QC personnel to compare numerical readings between:

 

Mold cavities

 

Production machines

 

Production shifts

 

Different batches

 

Different suppliers

 

This can help identify process variation earlier.

 

Useful for High-Gloss Plastic

 

Some plastic products are intentionally manufactured with highly reflective finishes.

 

Examples include decorative panels, automotive trim and premium consumer products.

 

The 0–1000 GU range of the Linshang LS196 provides additional flexibility when measuring these high-gloss surfaces.

 

The same instrument can therefore be used across products with significantly different gloss levels.

 

Improve Supplier Quality Control

 

Gloss measurement can also be useful for incoming material and supplier inspection.

 

If plastic components are purchased from several suppliers, companies can establish an approved reference or gloss specification.

 

Incoming components can then be compared against the required range.

 

This provides a more objective basis for supplier quality evaluation.

 

QC Mode for Faster Inspection

 

For repetitive production inspection, the LS196 provides a QC mode.

 

Users can establish appropriate limits and quickly determine whether measured products meet their gloss requirements.

 

This can be useful for factories inspecting many components every day.

 

Instead of relying on statements such as "too shiny" or "not glossy enough," inspectors can work with measurable values.

 

Maintain Batch-to-Batch Appearance

 

Consistent appearance is particularly important when several plastic components are assembled into one finished product.

 

If adjacent components have noticeably different gloss levels, customers may perceive them as mismatched even when their colours are similar.

 

Regular gloss inspection helps manufacturers monitor this difference before assembly or shipment.

 

Record Gloss Measurement Data

 

The LS196 supports computer connection and measurement data transmission.

 

Measurement results can be exported and used for further analysis or quality documentation.

 

This is useful for:

 

Batch records

 

Supplier reports

 

Production QC

 

Customer quality requirements

 

Process improvement

 

Historical comparison

 

Long-term measurement records can also help manufacturers identify whether gloss changes are isolated problems or gradual production trends.

 

More Objective Than Visual Inspection

 

Human perception can change according to lighting, viewing angle and the individual inspector.

 

This makes visual gloss evaluation difficult to standardise.

 

Using the LS196 allows the company to convert surface appearance into measurable Gloss Unit (GU) values.

 

This provides a common measurement language for production, QA/QC, suppliers and customers.

 

Gloss Measurement Standards

 

The Linshang LS196 is designed according to recognised gloss measurement standards including:

 

ISO 2813

 

ASTM D523

 

ASTM D2457

 

DIN 67530

 

Standardised measurement is especially useful for manufacturers that need consistent quality-control procedures.

 

Linshang LS196 Gloss Meter Supplier in Malaysia

 

For Malaysian plastic manufacturers, injection molding companies and QA/QC departments, the Linshang LS196 provides a practical solution for objective surface gloss inspection.

 

Its 60° geometry, wide 0–1000 GU measurement range, QC function and data-management capability make it suitable for both routine inspection and high-gloss plastic applications.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026