Linshang LS196 Gloss Meter for Metal and Electroplating Inspection Malaysia
Linshang LS196 Gloss Meter for Metal and Electroplating Inspection Malaysia
Surface appearance is an important quality requirement for many metal and electroplated products. A finished component may meet its dimensional requirements but still be rejected if its surface appearance is inconsistent.
The Linshang LS196 Gloss Meter provides a numerical method for evaluating surface gloss, helping manufacturers reduce dependence on subjective visual inspection.
With a 60° measurement angle and a wide 0–1000 GU measurement range, the LS196 is particularly useful for highly reflective metal and electroplated surfaces.
Why Measure Gloss on Metal Surfaces?
Metal surface appearance can vary because of differences in:
Polishing
Grinding
Surface preparation
Coating
Electroplating
Raw materials
Cleaning processes
Production conditions
Finishing quality
These differences may affect how the final product looks even when its dimensions and basic specifications remain unchanged.
Gloss measurement gives QA/QC personnel a measurable value that can be compared between products and production batches.
Applications in Metal Manufacturing
The Linshang LS196 can be used for surface inspection of:
Polished metal components
Painted metal
Coated metal panels
Stainless steel products
Decorative metal parts
Automotive components
Hardware
Metal furniture
Appliance components
Industrial finished products
It can be used for incoming inspection, process monitoring and final quality inspection.
Gloss Measurement for Electroplated Parts
Electroplated surfaces can be highly reflective.
Visual inspection is commonly used to identify obvious appearance defects, but it can be difficult to quantify smaller differences between samples.
Using a gloss meter allows manufacturers to establish numerical reference values.
The LS196 can be useful for evaluating the surface consistency of various finished components where gloss is an important appearance requirement.
Its measurement range up to 1000 GU is especially valuable for highly glossy and reflective surfaces.
Why a 1000 GU Range Is Useful
Not every gloss meter is intended for very high-gloss measurements.
For ordinary painted or coated materials, a conventional gloss range may be sufficient.
However, highly polished, coated or reflective surfaces can require a wider measurement capability.
The Linshang LS196 offers a 0–1000 GU range, allowing one instrument to cover both conventional and high-gloss applications.
This makes it useful for factories handling multiple materials and finishing processes.
Check Polishing Consistency
Polishing quality can vary between operators, machines, polishing compounds or production batches.
Instead of evaluating the finished surface only by eye, manufacturers can measure several points and compare the gloss readings.
For example:
Before polishing → Measure
After polishing → Measure again
The difference provides a measurable indication of how the finishing process has changed the surface.
This can be useful when optimising polishing procedures or comparing different processing conditions.
Establish a Golden Sample
One practical quality-control method is to select an approved product as a golden sample.
The gloss value of the approved surface can be measured and recorded.
Future production can then be compared against the established reference range.
This helps reduce disagreements such as:
"This batch looks duller."
"The plating is not shiny enough."
"The new supplier's finish looks different."
Instead, QA/QC teams can compare actual GU readings.
QC Mode for Production Inspection
The Linshang LS196 provides a QC mode that can assist with repetitive quality inspection.
Once suitable upper and lower limits are established, production samples can be evaluated against the required specification.
This is useful for:
Incoming components
Production line inspection
Finished goods
Supplier comparison
Batch inspection
It can make gloss inspection faster and more consistent between operators.
Data Recording for Quality Management
The LS196 supports computer connection and data transmission.
Measurement results can be exported for further analysis and documentation.
This can help manufacturers maintain records for:
Production batches
Supplier quality
Customer requirements
Process improvement
Internal audits
Quality investigations
If a surface-quality complaint occurs later, recorded measurement data can provide useful supporting information.
Reduce Subjective Quality Disputes
Surface appearance can be difficult to discuss because different people may have different opinions about what is considered "glossy."
Lighting conditions can also change how a surface appears.
A gloss meter provides a numerical Gloss Unit (GU) value, giving manufacturers, suppliers and customers a more objective basis for comparison.
Standards for Gloss Measurement
The Linshang LS196 is designed according to recognised gloss measurement standards including:
ASTM D523
ASTM D2457
ISO 2813
DIN 67530
Standardised measurement methods can help improve consistency between different inspection locations and operators.
Linshang LS196 for Malaysian Metal Industries
The LS196 is suitable for Malaysian companies involved in metal fabrication, automotive components, electroplating, industrial coatings, polishing and general manufacturing.
For businesses working with both normal and highly reflective surfaces, its 0–1000 GU range provides additional measurement flexibility.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for manufacturing, industrial inspection and QA/QC applications.
Contact us with your material and surface application, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026