Linshang LS196 Gloss Meter for Coating Process Troubleshooting Malaysia
Linshang LS196 Gloss Meter for Coating Process Troubleshooting Malaysia
When a coated surface suddenly looks duller, glossier or less consistent than normal, visual inspection can identify that something has changed—but it may not show how much the surface has changed.
The Linshang LS196 Gloss Meter provides numerical Gloss Unit (GU) measurements that can help production and QA/QC teams compare coating results and investigate process variation.
With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is suitable for many conventional and high-gloss coating applications.
Why Does Coating Gloss Change?
Gloss variation can be caused by many factors, including:
Coating formulation
Raw material batch
Coating thickness
Surface preparation
Spray settings
Application method
Drying conditions
Curing temperature
Curing time
Polishing
Substrate condition
When troubleshooting, objective measurement helps determine whether the difference is isolated or systematic.
Problem 1: The New Batch Looks Duller
Suppose a customer or QC inspector reports that the latest production batch appears duller than normal.
A practical first step is to compare:
Approved Sample → Measure
Previous Batch → Measure
Current Batch → Measure
If the current batch consistently produces different GU readings, the production team has numerical evidence that the surface finish has changed.
The next step is to investigate what changed in the process.
Problem 2: One Area Is Glossier Than Another
A large coated panel may not have uniform gloss.
Measure several predefined locations:
Top → Measure
Centre → Measure
Bottom → Measure
If the readings vary significantly, investigate possible differences in:
Coating application
Film thickness
Surface preparation
Curing
Polishing
Multiple measurements help determine whether the problem affects the whole product or only a particular area.
Problem 3: Different Production Lines Give Different Results
If the same product is manufactured on several lines, compare their gloss results.
For example:
Line A → Measure
Line B → Measure
Line C → Measure
If one line consistently differs from the others, engineers can investigate the process conditions on that line.
Problem 4: Supplier Components No Longer Match
A supplier may change its coating process without a major change in product dimensions or colour.
If new components look different, compare them with an approved sample.
Gloss measurements can help determine whether surface reflectivity has changed.
This is useful for incoming quality control and supplier-quality discussions.
Problem 5: Gloss Changes After Curing
Curing conditions can affect coating appearance.
If gloss changes unexpectedly, compare samples produced under different curing conditions.
Record the corresponding GU values and process information.
This gives engineers more useful data for identifying relationships between process conditions and final appearance.
Problem 6: Gloss Changes After Polishing
Polishing can increase or modify surface gloss.
To evaluate the process:
Before Polishing → Measure
After Polishing → Measure
Final Inspection → Measure
If the results are inconsistent between products, investigate polishing equipment, compounds, operator technique and surface condition.
Check the Measurement Method First
Before assuming that the production process is faulty, confirm that the measurement itself is consistent.
Check:
Surface cleanliness
Measurement position
Instrument placement
Sample condition
Number of readings
Fingerprints, dust or measuring different locations can create unnecessary variation.
Use the Same Measurement Locations
Troubleshooting data is only useful when samples are compared under similar conditions.
For repetitive products, establish fixed measurement points.
This helps ensure that differences between readings are more likely to represent actual surface variation rather than differences in operator technique.
Why the 0–1000 GU Range Helps
Coating applications can range from ordinary finishes to highly glossy surfaces.
The Linshang LS196 provides a wide 0–1000 GU measurement range, giving users flexibility when troubleshooting different types of products.
This is particularly useful for factories producing several coating finishes.
Record Process Information Together With Gloss Data
A GU reading becomes much more useful when it is connected to production information.
For example, record:
Product model
Batch number
Coating batch
Production line
Process conditions
Measurement location
GU reading
Inspection result
The LS196 supports computer connection and measurement data transmission, allowing results to be exported for further processing and analysis.
Look for Trends, Not Just One Abnormal Reading
One unusual measurement does not necessarily indicate a major process problem.
Repeat the measurement and inspect additional samples.
If the same pattern appears repeatedly, investigate the manufacturing process.
Historical data can also reveal gradual changes that may not be obvious from a single inspection.
Use Gloss Measurement as a Troubleshooting Tool
A gloss meter does not automatically tell users why a coating problem occurred.
Its value is providing objective data.
The troubleshooting process becomes:
Detect appearance difference → Measure → Confirm variation → Compare process conditions → Investigate cause → Correct process → Measure again
This makes gloss measurement useful as part of a systematic quality-improvement process.
Linshang LS196 for Coating Troubleshooting in Malaysia
For Malaysian paint companies, coating applicators, powder-coating companies and manufacturing QA/QC departments, the LS196 provides a practical method for quantifying changes in surface appearance.
Its 60° measurement geometry, wide 0–1000 GU range, QC functionality and data-management capability make it suitable for both routine inspection and coating-process troubleshooting.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for manufacturing, coating inspection and QA/QC applications in Malaysia.
Contact us with details of your coating, material and measurement application, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026