Linshang LS196 Gloss Meter for Comparing Surface Finish Between Production Batches Malaysia
Linshang LS196 Gloss Meter for Comparing Surface Finish Between Production Batches Malaysia
Maintaining consistent surface appearance from one production batch to another is an important quality-control requirement for many manufacturers.
A product can have the correct dimensions, material and colour but still appear different because its surface gloss has changed.
The Linshang LS196 Gloss Meter provides manufacturers with an objective method for comparing surface gloss between different production batches using numerical Gloss Unit (GU) readings.
With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is suitable for many conventional and high-gloss industrial surfaces.
Why Does Batch-to-Batch Gloss Consistency Matter?
Customers expect the same product to look consistent every time they purchase it.
However, manufacturing conditions can change between production batches.
Gloss variation may result from:
Different raw material batches
Paint formulation changes
Coating thickness
Curing conditions
Production temperature
Mold condition
Polishing process
Surface preparation
Different suppliers
Machine settings
These changes may affect appearance even when the product still meets other specifications.
Which Products Can Be Compared?
Depending on the surface and applicable measurement requirements, the LS196 can be used for suitable products such as:
Painted components
Plastic parts
Automotive components
Powder-coated products
Furniture panels
Coated metal
Electroplated parts
Ceramic products
Polished surfaces
Decorative components
This makes batch comparison relevant across many manufacturing industries.
Compare Current Production With Previous Batches
A simple quality-control procedure can be established.
For example:
Approved Batch → Record Gloss
Batch 2 → Measure and Compare
Batch 3 → Measure and Compare
Batch 4 → Measure and Compare
If the readings begin moving away from the normal range, QA/QC personnel can investigate the production process.
Keep a Golden Sample
An approved product can be retained as a golden sample.
Its gloss can be measured at predetermined locations.
Future production samples can then be compared with this reference.
This is particularly useful when production is repeated over several months or years.
Instead of relying on an inspector's memory of how the original product looked, the company has measurable reference data.
Detect Gradual Process Changes
Not every manufacturing problem happens suddenly.
A process may slowly drift over time.
For example:
January → Normal
February → Slight change
March → Further change
April → Customer notices difference
If gloss measurements are recorded regularly, QA/QC teams may identify the trend before it becomes visually obvious.
This makes gloss measurement useful for process monitoring as well as final inspection.
Compare Different Production Lines
Manufacturers operating several production lines can use gloss measurements to compare their output.
For example:
Production Line A → Measure
Production Line B → Measure
Production Line C → Measure
If one line consistently produces different gloss readings, engineers can investigate differences in equipment or process conditions.
Compare Different Production Shifts
Variation can sometimes occur between production shifts.
The LS196 can provide numerical information for comparing:
Morning shift
Afternoon shift
Night shift
This does not automatically identify the cause of a difference, but it gives the production team objective data for further investigation.
Why the 0–1000 GU Range Is Useful
Different products can have very different gloss levels.
A factory may produce an ordinary painted component on one line and a highly reflective product on another.
The Linshang LS196 offers a wide 0–1000 GU measurement range, providing flexibility for both conventional and high-gloss surfaces.
This makes it useful for manufacturers handling multiple product categories.
QC Mode for Batch Inspection
The LS196 provides a QC mode that can assist with repetitive quality-control measurements.
Once appropriate acceptance limits are established, production samples can be compared against the required range.
This helps different operators follow more consistent inspection criteria.
Standardise the Measurement Location
For meaningful batch comparison, measurement locations should remain consistent.
For example:
Point A – Top
Point B – Centre
Point C – Bottom
The same positions should be used for each production batch.
Otherwise, differences between measurement locations may be mistaken for batch variation.
Record Batch Measurement Data
The LS196 supports computer connection and measurement data transmission.
Results can be exported for further processing and analysis.
A batch record can include:
Product model
Batch number
Production date
Production line
Measurement location
GU reading
Inspection result
Over time, this creates a useful history of product surface quality.
Investigate Unexpected Batch Differences
If one production batch suddenly shows different gloss readings, QA/QC teams can investigate:
Raw material changes
Supplier changes
Coating formulation
Machine settings
Curing conditions
Mold condition
Polishing
Surface preparation
Gloss measurement does not automatically identify the cause, but it provides objective evidence that a difference exists.
Reduce Customer Complaints
A common customer complaint may be:
“The new batch looks different from the previous shipment.”
With historical gloss records, manufacturers have more information available for investigating such complaints.
The current batch can be compared with retained samples or previous measurement data.
This provides a stronger basis for quality discussions than visual judgement alone.
Linshang LS196 for Malaysian Manufacturers
The LS196 can be useful for Malaysian manufacturers that need to maintain consistent surface appearance across repeated production batches.
Its combination of 60° measurement geometry, 0–1000 GU range, QC functionality and data-management capability makes it suitable for systematic batch-to-batch gloss comparison.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for manufacturing, industrial inspection and QA/QC applications in Malaysia.
Contact us with your material and surface application, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026