Linshang LS196 Gloss Meter for Research Laboratory and R&D Testing Malaysia

Linshang LS196 Gloss Meter for Research Laboratory and R&D Testing Malaysia

 

Research and development teams often need to compare how different materials, formulations and manufacturing processes affect surface appearance.

 

Visual observation is useful, but descriptions such as “more glossy,” “slightly duller,” or “better finish” are subjective and difficult to analyse systematically.

 

The Linshang LS196 Gloss Meter provides numerical surface-gloss measurements in Gloss Units (GU).

 

With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 can be useful for laboratory, product-development and industrial R&D applications involving suitable surfaces.

 

Why Measure Gloss During R&D?

 

During product development, engineers may change one parameter at a time to understand its effect on the finished surface.

 

Variables can include:

 

Material formulation

 

Resin

 

Pigment

 

Additives

 

Coating thickness

 

Curing conditions

 

Surface preparation

 

Polishing

 

Mold finish

 

Processing temperature

 

A gloss meter provides quantitative data for comparing these experiments.

 

Compare Different Formulations

 

Consider a coating laboratory developing a new high-gloss finish.

 

Several formulations may be prepared:

 

Formula A → Apply → Cure → Measure

 

Formula B → Apply → Cure → Measure

 

Formula C → Apply → Cure → Measure

 

The GU results provide an objective way to compare the surface appearance produced by each formulation.

 

This makes it easier to identify promising formulations for further development.

 

Evaluate Process Parameters

 

Gloss measurement can also be used when studying manufacturing conditions.

 

For example, an R&D team may investigate the effect of different curing temperatures:

 

Temperature A → Measure gloss

 

Temperature B → Measure gloss

 

Temperature C → Measure gloss

 

The results can then be compared with other performance parameters.

 

This helps researchers understand whether a process adjustment improves one characteristic while changing another.

 

Applications Across Different Materials

 

Depending on the measurement requirement, the Linshang LS196 can be used for suitable surfaces involving:

 

Paint

 

Coatings

 

Plastic

 

Automotive materials

 

Powder coating

 

Furniture finishes

 

Ceramic products

 

Polished surfaces

 

Decorative materials

 

Industrial components

 

This versatility can be useful for laboratories working on several product categories.

 

Wide 0–1000 GU Measurement Range

 

R&D work can involve materials with very different surface characteristics.

 

Researchers may not always know the expected gloss range before beginning an experiment.

 

The LS196 offers a wide 0–1000 GU measurement range, providing additional flexibility when experimental samples range from conventional to highly glossy surfaces.

 

Build Quantitative R&D Data

 

Instead of recording:

 

Sample A – Glossy

 

Sample B – Very Glossy

 

Sample C – Slightly Dull

 

researchers can record numerical GU values.

 

This makes it easier to:

 

Compare samples

 

Analyse trends

 

Repeat experiments

 

Prepare technical reports

 

Communicate results

 

Select final formulations

 

Numerical data is particularly valuable when several engineers are involved in the same development project.

 

Compare Before and After Surface Treatment

 

The LS196 can also be used to study changes caused by surface treatment.

 

For example:

 

Original surface → Measure

 

After coating → Measure

 

After curing → Measure

 

After polishing → Measure

 

This helps R&D teams quantify how each processing stage changes the surface appearance.

 

Create Repeatable Test Procedures

 

For useful experimental data, the measurement procedure should remain consistent.

 

Researchers should control factors such as:

 

Sample preparation

 

Measurement location

 

Number of readings

 

Instrument verification

 

Surface cleanliness

 

Environmental conditions where relevant

 

Data-recording method

 

Using the same procedure improves comparability between experiments.

 

Data Export for Further Analysis

 

The Linshang LS196 supports computer connection and measurement data transmission.

 

Results can be exported for further processing and analysis.

 

Researchers can combine gloss measurements with other test data such as:

 

Colour

 

Coating thickness

 

Hardness

 

Surface properties

 

Process parameters

 

Environmental conditions

 

This can provide a more complete understanding of the material or product under development.

 

From R&D to Production QC

 

Once a new product has been successfully developed, its approved gloss values can become part of the production quality-control specification.

 

The workflow can be:

 

R&D Sample → Establish Target → Pilot Production → Confirm Range → Mass Production QC

 

This creates continuity between product development and manufacturing.

 

The LS196 can therefore be useful not only during R&D but also when transferring the final product into routine production.

 

Useful for Supplier Material Evaluation

 

R&D laboratories frequently evaluate materials from different suppliers.

 

For example:

 

Supplier A coating → Prepare sample → Measure

 

Supplier B coating → Prepare sample → Measure

 

Supplier C coating → Prepare sample → Measure

 

Gloss measurements provide another objective parameter for comparing the resulting surfaces.

 

Recognised Gloss Measurement Standards

 

The Linshang LS196 is designed according to recognised gloss measurement standards including:

 

ISO 2813

 

ASTM D523

 

ASTM D2457

 

DIN 67530

 

Researchers should select the appropriate test method according to their material, project requirements and applicable standard.

 

Linshang LS196 for Laboratories in Malaysia

 

The LS196 can be useful for Malaysian industrial laboratories, universities, R&D departments, paint laboratories, coating companies and manufacturing engineering teams that need objective surface-gloss measurements.

 

Its combination of 60° measurement geometry, 0–1000 GU range, QC functionality and data-management capability makes it suitable for both experimental work and subsequent production quality control.

 

Looking for Linshang LS196 Gloss Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for laboratory, R&D, manufacturing and QA/QC applications in Malaysia.

 

Contact us with details of your material and testing application, and our team can assist you in selecting a suitable gloss measurement solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

16 Aug 2026