Linshang LS196 Gloss Meter for Paint Factory Quality Control Malaysia
Linshang LS196 Gloss Meter for Paint Factory Quality Control Malaysia
For paint manufacturers, colour is only one part of the finished appearance. Gloss is another important characteristic that can influence how customers perceive a coating.
Two paint samples may have a similar colour but appear different because their gloss levels are not the same.
The Linshang LS196 Gloss Meter provides paint manufacturers and QA/QC teams with an objective method for measuring surface gloss in Gloss Units (GU).
With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is suitable for many general and high-gloss paint and coating applications.
Why Should Paint Manufacturers Measure Gloss?
Paint gloss can be influenced by many factors, including:
Paint formulation
Resin
Pigment
Additives
Mixing conditions
Application thickness
Substrate preparation
Drying conditions
Curing temperature
Application method
Even small formulation or process changes may affect the final surface appearance.
A gloss meter allows manufacturers to quantify these differences.
Applications in Paint Manufacturing
The Linshang LS196 can be useful for evaluating suitable test panels and coated surfaces involving:
Industrial paint
Automotive paint
Furniture coatings
Protective coatings
Decorative coatings
Metal coatings
Plastic coatings
High-gloss finishes
Production samples
R&D coating samples
Gloss measurements can be incorporated into R&D, production QC and final product evaluation.
Raw Material and Formulation Development
When developing a new paint formulation, laboratories may prepare several test samples.
For example:
Formula A → Apply → Cure → Measure
Formula B → Apply → Cure → Measure
Formula C → Apply → Cure → Measure
Gloss readings provide quantitative information for comparing the final surface appearance of each formulation.
This is more useful than relying only on descriptions such as "slightly glossier."
Batch-to-Batch Quality Control
Customers expect the same paint product to deliver a consistent finish from one batch to another.
Paint manufacturers can prepare standard test panels and measure the resulting gloss.
The current production batch can then be compared with:
Approved reference values
Previous production batches
Internal specifications
Customer requirements
This helps identify unusual variation before the product is released.
Why 60° Gloss Measurement?
The Linshang LS196 uses 60° measurement geometry, which is widely used for general gloss evaluation.
This makes it suitable for many routine paint and coating quality-control applications.
For formal testing, however, users should always follow the geometry and measurement procedure specified by the applicable standard or customer.
Why Is the 0–1000 GU Range Useful?
Paint and coating products can cover a broad range of surface finishes.
Some are relatively low gloss, while others are designed to create a highly reflective appearance.
The LS196 provides a wide 0–1000 GU measurement range, giving laboratories and QA/QC departments flexibility when working with different products.
This is particularly useful when highly glossy coatings need to be evaluated.
Evaluate Application Conditions
The same paint formulation may produce different gloss results under different application conditions.
Manufacturers can investigate factors such as:
Wet film thickness
Dry film thickness
Spray parameters
Application method
Substrate
Drying temperature
Curing time
Gloss measurements can help quantify how these process changes influence the final finish.
Create Standard Test Panels
For better comparison, paint manufacturers can establish a consistent test-panel preparation procedure.
The procedure may define:
Panel material
Surface preparation
Paint application method
Coating thickness
Drying or curing conditions
Measurement locations
Number of gloss readings
Keeping these conditions consistent improves the usefulness of the gloss data.
QC Mode for Routine Batch Inspection
The LS196 provides a QC mode that can help with repetitive production inspection.
Once suitable acceptance limits are established, measurement results can be compared against the required range.
This can improve efficiency when multiple production batches need to be checked.
Data Recording for Paint QA/QC
The Linshang LS196 supports computer connection and measurement data transmission.
Results can be exported for further processing and analysis.
Paint manufacturers can maintain records including:
Product code
Formula
Batch number
Production date
Test panel
GU reading
QC result
Historical data can help identify long-term production trends.
Troubleshooting Customer Complaints
Suppose a customer reports:
"The latest batch looks more glossy than the previous batch."
Without measurement data, investigating the complaint can become subjective.
If both retained samples and current samples are available, gloss measurements can provide useful comparative information.
The manufacturer can then investigate whether the difference is related to the paint itself, application conditions or another factor.
Gloss Measurement Standards
The Linshang LS196 is designed according to recognised gloss measurement standards including:
ISO 2813
ASTM D523
ASTM D2457
DIN 67530
Users should follow the specific standard and test procedure required for their application.
Linshang LS196 for Paint Manufacturers in Malaysia
The LS196 can be useful for Malaysian paint manufacturers, coating suppliers, R&D laboratories and QA/QC departments that require objective gloss measurement.
Its combination of 60° measurement, wide 0–1000 GU range, QC functionality and data-management capability makes it suitable for product development, production monitoring and quality inspection.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for Malaysian paint, coating, manufacturing and QA/QC applications.
Contact us with your paint or coating application, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026