Linshang LS196 Gloss Meter for High Gloss Plastic and Injection Molding Malaysia
Linshang LS196 Gloss Meter for High Gloss Plastic and Injection Molding Malaysia
High-gloss plastic components are widely used in automotive interiors, consumer electronics, household appliances and decorative products. For these applications, surface appearance can be just as important as dimensions and colour.
The Linshang LS196 Gloss Meter provides an objective way to measure plastic surface gloss in Gloss Units (GU).
With its 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is particularly useful for manufacturers that need to inspect highly glossy injection-molded and finished plastic surfaces.
Why Does Gloss Matter in Injection Molding?
The surface gloss of an injection-molded component can be influenced by many production factors.
These can include:
Mold surface condition
Mold polishing
Resin type
Raw material batch
Processing temperature
Mold temperature
Injection parameters
Additives
Surface texture
Post-processing
Coating
Even when the dimensions remain within tolerance, changes in these factors may cause the finished product to look different.
Typical High-Gloss Plastic Applications
The LS196 can be considered for suitable surfaces such as:
Automotive interior trim
Automotive exterior plastic components
Consumer electronics housings
Appliance panels
Decorative plastic parts
ABS components
High-gloss injection-molded parts
Plastic covers
Coated plastic components
Premium consumer products
These products often require consistent appearance across large production quantities.
Detect Mold Cavity Differences
Multi-cavity molds can produce several components during each molding cycle.
Ideally, components from each cavity should have a consistent appearance.
However, differences in mold surface condition or processing can sometimes affect gloss.
A simple comparison can be performed:
Cavity 1 → Measure
Cavity 2 → Measure
Cavity 3 → Measure
Cavity 4 → Measure
If one cavity consistently produces different gloss readings, the production team can investigate the mold or process.
Monitor Mold Wear
A mold surface can change over time.
Wear, contamination, polishing or maintenance may influence the surface appearance transferred to molded components.
By recording gloss values periodically, manufacturers may be able to identify gradual changes in finished-part appearance.
This makes gloss measurement useful not only for final inspection but also for process monitoring.
Compare Different Resin Batches
A change in raw material can sometimes affect the final appearance of a plastic component.
Manufacturers can compare gloss readings from products made using:
Resin Batch A
versus
Resin Batch B
If a significant difference appears, the production and quality teams have objective data for further investigation.
Why a 1000 GU Range Can Be Useful
High-gloss plastics can produce strong reflections.
The Linshang LS196 provides a wide 0–1000 GU range, giving manufacturers additional flexibility when working with highly reflective surfaces.
This also makes the instrument useful for factories producing several products with different gloss levels.
Compare Before and After Surface Treatment
Some plastic components undergo additional finishing after molding.
This may include:
Painting
Coating
Polishing
Decorative finishing
Gloss measurements can be taken before and after the process.
For example:
After molding → Measure
After coating → Measure
After polishing → Measure
Final QC → Measure
This helps manufacturers quantify how each finishing stage affects surface appearance.
Control Appearance Between Adjacent Components
Gloss consistency becomes particularly important when several plastic components are assembled next to one another.
For example, an automotive dashboard may contain multiple plastic panels.
If one component has a noticeably different gloss level, the customer may perceive it as a colour or material mismatch even when the colour itself is correct.
Measuring gloss before assembly can help detect these differences.
Establish a Golden Sample
An approved plastic component can be retained as a golden sample.
Measure its gloss at predefined locations and establish an appropriate acceptance range.
Future production can then be compared against the same reference.
This provides a clearer quality requirement for:
Production
QA/QC
Mold suppliers
Material suppliers
Subcontractors
Customers
QC Mode for Mass Production
Injection molding often involves high production quantities.
The LS196 provides a QC mode that can help operators evaluate measurements against established limits.
This can make repetitive inspection more efficient and reduce dependence on subjective visual judgement.
Record Gloss Data for Process Improvement
The Linshang LS196 supports computer connection and measurement data transmission.
Results can be exported for further processing and analysis.
Manufacturers can record information such as:
Product model
Mold number
Cavity number
Resin batch
Production machine
Production shift
GU reading
Inspection result
Over time, these records can help engineers identify relationships between process conditions and surface appearance.
Gloss Meter and Colorimeter Are Different
Gloss and colour are related to appearance, but they are different measurement parameters.
A colorimeter measures colour differences.
A gloss meter measures specular surface reflection.
Two plastic components may have very similar colour values but noticeably different gloss levels.
For appearance-critical products, manufacturers may therefore use both colour and gloss measurement as part of the quality-control process.
Linshang LS196 for Malaysian Plastic Manufacturers
For Malaysian injection molding companies, automotive component manufacturers, electronics manufacturers and plastic-product suppliers, the LS196 provides a practical method for objective surface-gloss inspection.
Its combination of 60° measurement, 0–1000 GU range, QC functionality and data management capability makes it particularly suitable for high-gloss plastic manufacturing applications.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for Malaysian manufacturing, industrial inspection and QA/QC applications.
Contact us with details of your plastic material, component and surface-finish requirement, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026