Linshang LS196 Gloss Meter for Electroplating and Polished Metal Quality Control Malaysia
Linshang LS196 Gloss Meter for Electroplating and Polished Metal Quality Control Malaysia
Electroplated and polished metal components are often selected not only for their functional properties but also for their appearance. When the surface finish is inconsistent, components from different batches can look noticeably different even when their dimensions and materials are correct.
The Linshang LS196 Gloss Meter provides a numerical method for evaluating surface gloss in Gloss Units (GU).
With its 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is particularly useful for highly glossy and reflective finished surfaces.
Why Measure Gloss on Electroplated Components?
Electroplated surface appearance can vary because of changes in:
Surface preparation
Base material condition
Polishing
Plating process
Bath condition
Process parameters
Cleaning
Finishing
Production batches
Visual inspection can identify obvious defects, but smaller differences in gloss can be difficult to quantify.
A gloss meter gives QA/QC personnel an objective measurement for comparison.
Applications for Metal Finishing Companies
Depending on the surface and measurement requirements, the LS196 can be used for suitable products such as:
Electroplated components
Polished metal parts
Decorative metal trim
Automotive components
Appliance components
Metal furniture
Hardware
Coated metal
Industrial components
Reflective finished surfaces
It can be incorporated into incoming inspection, process monitoring and final QC.
Why High-Gloss Measurement Range Matters
Polished and electroplated surfaces can be strongly reflective.
For these applications, measurement range becomes an important consideration when selecting a gloss meter.
The Linshang LS196 offers a wide 0–1000 GU measurement range.
This gives users flexibility when measuring both conventional finished surfaces and highly glossy materials.
Check the Effect of Polishing
Gloss measurement can be used to quantify changes during polishing.
For example:
Before polishing → Measure
First polishing stage → Measure
Final polishing → Measure
Final QC → Measure
The readings provide measurable information about how the polishing process affects the finished surface.
This can help manufacturers compare different polishing methods, compounds or process conditions.
Compare Different Production Batches
Suppose an electroplating company produces the same component every week.
The customer reports that the latest batch looks slightly duller.
Instead of relying only on visual comparison, retained samples from previous batches can be measured and compared with the current batch.
The numerical results provide useful information for investigating whether a real process change has occurred.
Establish a Golden Sample
An approved electroplated or polished component can be retained as a golden sample.
Measure the gloss at predetermined locations and establish appropriate acceptance criteria.
Future production can then be compared with the same reference.
This improves communication between:
Production
QA/QC
Customer
Supplier
Subcontractor
Instead of specifying only "bright finish" or "high gloss," companies can use measurable GU values as part of their quality requirements.
Inspect Multiple Locations
Large metal components should not necessarily be evaluated with only one measurement.
Different areas may have different polishing or finishing conditions.
A practical procedure can include:
Position A → Measure
Position B → Measure
Position C → Measure
If one location consistently differs from the others, the production team can investigate the finishing process.
QC Mode for Routine Inspection
The Linshang LS196 provides a QC mode that can assist with repetitive inspection.
Once suitable upper and lower limits are established, operators can evaluate production samples against the required criteria.
This is particularly useful for companies processing large quantities of similar components.
Gloss Measurement and Coating Thickness Are Different
A common mistake is to assume that a correct coating or plating thickness automatically means the surface appearance will be correct.
These are different parameters.
A thickness gauge evaluates coating thickness on an appropriate material.
A gloss meter evaluates how the finished surface reflects light.
A component may therefore meet its thickness requirement while still showing a different gloss level.
For appearance-critical components, both parameters may need to be controlled.
Build Process-Control Data
The Linshang LS196 supports computer connection and measurement data transmission.
Results can be exported for further processing and analysis.
Companies can record information such as:
Product number
Batch number
Process line
Polishing method
Measurement location
GU reading
Inspection result
Historical measurements can help identify gradual process changes.
Troubleshooting Low Gloss After Finishing
If a finished metal component suddenly produces lower gloss readings, possible factors to investigate include:
Surface contamination
Polishing quality
Base material condition
Process parameters
Cleaning procedure
Measurement location
Surface scratches
Actual production variation
Repeat the measurement under consistent conditions before making a quality decision.
Reduce Subjective Appearance Disputes
Words such as:
Bright
Shiny
Highly polished
can mean different things to different people.
A numerical gloss measurement provides a more objective reference.
This can be especially valuable when a manufacturer, subcontractor and customer need to agree on acceptable surface appearance.
Linshang LS196 for Metal Finishing Companies in Malaysia
For Malaysian electroplating companies, metal fabricators, polishing companies, automotive suppliers and QA/QC departments, the LS196 provides a practical method for objective surface-gloss measurement.
Its 60° measurement geometry, wide 0–1000 GU range, QC functionality and data-management capability make it particularly suitable for highly reflective finished surfaces.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for Malaysian manufacturing, metal finishing, industrial inspection and QA/QC applications.
Contact us with details of your metal, plating or polishing application, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026