Linshang LS196 Gloss Meter for Automotive Parts Supplier Quality Control Malaysia
Linshang LS196 Gloss Meter for Automotive Parts Supplier Quality Control Malaysia
Automotive components are often produced by multiple suppliers, yet the assembled vehicle or finished product must maintain a consistent appearance.
Even when two components have the same colour specification, differences in surface gloss can make them appear mismatched.
The Linshang LS196 Gloss Meter provides automotive parts manufacturers and suppliers with an objective method for measuring surface gloss in Gloss Units (GU).
With its 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is suitable for many conventional and high-gloss automotive surface applications.
Why Is Gloss Important for Automotive Components?
Automotive customers pay close attention to appearance.
Gloss differences can be especially noticeable when components are installed next to each other.
Examples include:
Dashboard panels
Centre-console components
Door trim
Exterior plastic parts
Painted panels
Decorative trim
Coated metal components
High-gloss plastic parts
Interior accessories
A component can meet dimensional and colour requirements but still look different because its surface gloss is not consistent.
Incoming Inspection of Automotive Parts
Automotive manufacturers receiving components from suppliers can include gloss measurement as part of incoming quality control.
The inspection process may include:
Check dimensions → Check colour → Check surface defects → Measure gloss → Record result
This provides a more complete evaluation of the component's appearance.
Compare Different Suppliers
If several suppliers manufacture similar components, the LS196 can be used to compare their surface finish.
For example:
Approved Master Sample → Reference
Supplier A → Measure
Supplier B → Measure
Supplier C → Measure
This gives purchasing and supplier-quality teams objective information when evaluating different sources.
High-Gloss Automotive Trim
Modern vehicle interiors increasingly use decorative high-gloss components.
Highly polished black plastic, coated trim and other reflective surfaces can require a gloss meter with sufficient measurement range.
The Linshang LS196 provides a wide 0–1000 GU range, making it particularly useful when very glossy automotive surfaces need to be evaluated.
Monitor Injection-Molded Components
Plastic automotive components can show gloss variation because of:
Mold condition
Mold cavity differences
Resin batch
Mold temperature
Injection parameters
Surface texture
Additives
Post-processing
Regular gloss measurements can help identify differences between cavities, machines or production batches.
Evaluate Painted Automotive Parts
For painted components, gloss can also be affected by:
Paint formulation
Coating thickness
Spray conditions
Surface preparation
Drying
Curing
Polishing
The LS196 can provide numerical measurements for comparing finished painted surfaces.
Establish a Golden Sample
Automotive suppliers can retain an approved component as a golden sample.
The gloss value can be measured at predetermined locations.
Future production can then be compared against the approved reference.
This is particularly useful when communicating requirements between:
Automotive manufacturer
Tier 1 supplier
Tier 2 supplier
Paint supplier
Injection molding company
QA/QC department
A measurable gloss specification reduces dependence on subjective descriptions.
Measure the Same Location Every Time
Measurement position is important for automotive components.
A component may contain different textures or surface geometries.
For reliable comparison, define specific measurement locations.
For example:
Position A → Upper surface
Position B → Centre surface
Position C → Lower surface
Operators should use the same locations when comparing production samples.
QC Mode for Mass Production
Automotive suppliers often manufacture components in large quantities.
The LS196 provides a QC mode that can help evaluate measurements against established acceptance limits.
This can improve inspection efficiency and help different operators follow the same quality criteria.
Traceability and Measurement Records
The Linshang LS196 supports computer connection and measurement data transmission.
Results can be exported for further processing and quality documentation.
Records can include:
Part number
Supplier
Batch number
Mold or cavity
Production date
Measurement location
GU reading
Inspection result
This information can be useful when investigating future quality complaints.
Gloss Meter and Colorimeter Work Together
Automotive appearance inspection may require both colour and gloss measurement.
A colorimeter evaluates colour differences.
A gloss meter evaluates specular surface reflection.
Two components can have very similar colours but still appear different because their gloss levels are not the same.
For appearance-critical components, using both measurements can provide a more complete evaluation.
Reduce Customer Complaints
Surface appearance complaints can be costly, particularly after components have already been assembled or delivered.
By measuring gloss during production and before shipment, suppliers may detect abnormal surface variation earlier.
This supports preventive quality control instead of relying only on final customer feedback.
Linshang LS196 for Malaysian Automotive Suppliers
The LS196 can be useful for Malaysian automotive component manufacturers, injection molding companies, paint and coating suppliers, metal finishing companies and QA/QC departments.
Its combination of 60° measurement geometry, 0–1000 GU range, QC mode and data-management capability makes it suitable for many automotive surface-quality applications.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for automotive manufacturing, industrial inspection and QA/QC applications in Malaysia.
Contact us with your component material and surface requirement, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026