Linshang LS196 Gloss Meter for Comparing Different Surface Finishes Malaysia

Linshang LS196 Gloss Meter for Comparing Different Surface Finishes Malaysia

 

Manufacturers often need to compare different surface finishes during product development, supplier selection and production quality control.

 

Terms such as matt, semi-gloss, gloss and high gloss describe appearance, but visual descriptions alone can be subjective.

 

The Linshang LS196 Gloss Meter provides numerical Gloss Unit (GU) measurements that allow users to compare suitable surfaces more objectively.

 

With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is particularly useful for companies working with multiple surface finishes, including highly glossy products.

 

Why Compare Surface Gloss?

 

Two products may have:

 

The same colour

 

The same material

 

Similar dimensions

 

Similar coating thickness

 

but still look different.

 

One reason can be surface gloss.

 

Measuring gloss helps manufacturers determine whether the appearance difference is related to the way the surface reflects light.

 

Matt vs Gloss vs High Gloss

 

Surface finishes are often described using general terms such as:

 

Matt

 

A surface designed to produce relatively little specular reflection.

 

Semi-Gloss

 

A finish positioned between lower-gloss and high-gloss appearances.

 

Gloss

 

A visibly reflective surface finish.

 

High Gloss

 

A strongly reflective finish often used for premium or decorative products.

 

The exact acceptance requirement should be based on the product specification rather than the descriptive name alone.

 

A gloss meter allows companies to support these descriptions with measurable GU values.

 

Applications Across Different Industries

 

The Linshang LS196 can be used for suitable surfaces in industries such as:

 

Paint and coatings

 

Plastic manufacturing

 

Automotive components

 

Powder coating

 

Furniture

 

Metal finishing

 

Electroplating

 

Ceramic products

 

Stone processing

 

Industrial manufacturing

 

This makes it useful when one company handles several different surface finishes.

 

Compare Different Coating Formulations

 

A paint or coating manufacturer may prepare several formulations during product development.

 

For example:

 

Coating A → Measure

 

Coating B → Measure

 

Coating C → Measure

 

The GU readings provide quantitative information for comparing the finished surfaces.

 

This can help R&D teams select a formulation that produces the desired appearance.

 

Compare Different Suppliers

 

Suppose two suppliers provide the same painted component.

 

Both use the same colour specification, but their products appear slightly different.

 

A gloss meter can help determine whether surface gloss contributes to the difference.

 

For example:

 

Approved Sample → Reference

 

Supplier A → Compare

 

Supplier B → Compare

 

This gives purchasing and QA/QC teams more objective information for supplier evaluation.

 

Compare Different Polishing Processes

 

Polishing can significantly change surface gloss.

 

Manufacturers can use the LS196 to compare:

 

No polishing → Measure

 

Process A → Measure

 

Process B → Measure

 

Process C → Measure

 

This can help identify which polishing process produces the required finish.

 

Compare Before and After Surface Treatment

 

Gloss measurement can also be used to evaluate changes caused by manufacturing processes.

 

For example:

 

Original Surface → Measure

 

After Coating → Measure

 

After Curing → Measure

 

After Polishing → Measure

 

Final Product → Measure

 

This helps production and R&D teams understand how each process stage affects appearance.

 

Why the 0–1000 GU Range Is Important

 

Different finishes can produce very different gloss levels.

 

One of the advantages of the Linshang LS196 is its wide 0–1000 GU measurement range.

 

This provides flexibility when users need to measure both conventional surfaces and highly glossy or strongly reflective finishes.

 

For factories handling many different products, this wider range can be particularly useful.

 

Use a Golden Sample

 

Once the preferred surface finish has been selected, an approved product can be retained as a golden sample.

 

Its gloss can be measured at predetermined locations.

 

Future production can then be compared against the approved reference.

 

This converts a subjective appearance requirement into a more measurable QC parameter.

 

QC Mode for Routine Comparison

 

The LS196 provides a QC mode that can assist with repetitive production inspection.

 

Once appropriate acceptance limits have been established, operators can compare measured products against the required range.

 

This is useful when large quantities of products must maintain a similar surface finish.

 

Control Appearance Across Product Components

 

Some finished products contain several components positioned next to each other.

 

For example:

 

Automotive interior panels

 

Furniture cabinet doors

 

Appliance panels

 

Decorative plastic components

 

Coated metal assemblies

 

Even if the colours match, different gloss levels can make the components appear inconsistent.

 

Gloss measurement can help identify these differences before final assembly.

 

Record Surface-Finish Data

 

The Linshang LS196 supports computer connection and measurement data transmission.

 

Results can be exported for further processing and analysis.

 

Companies can maintain records for:

 

Product model

 

Surface finish

 

Supplier

 

Production batch

 

Measurement location

 

GU reading

 

Inspection result

 

Historical data can make future product and supplier comparisons easier.

 

Gloss Measurement Is More Objective Than Visual Description

 

Descriptions such as:

 

“A little more glossy.”

 

“Not shiny enough.”

 

“Almost the same.”

 

can mean different things to different people.

 

A gloss meter gives production teams, suppliers and customers a numerical reference for discussing surface appearance.

 

This can reduce misunderstanding and improve quality communication.

 

Linshang LS196 for Surface Finish Comparison in Malaysia

 

For Malaysian manufacturers handling multiple coatings, plastics, metals and decorative finishes, the LS196 provides a practical solution for objective surface-gloss comparison.

 

Its combination of 60° measurement geometry, wide 0–1000 GU range, QC functionality and data-management capability makes it suitable for product development, supplier comparison and routine manufacturing QC.

 

Looking for Linshang LS196 Gloss Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for manufacturing, industrial inspection and QA/QC applications in Malaysia.

 

Contact us with your material and surface-finish application, and our team can assist you in selecting a suitable gloss measurement solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

16 Aug 2026