Myzox CL-28 CL-36 Auto Level for Road Formation Level Checking Malaysia

Myzox CL-28 CL-36 Auto Level for Road Formation Level Checking Malaysia

 

Accurate road formation level is important before subsequent pavement layers are constructed. If the formation is too high or too low, additional cutting, filling or correction may be required before road construction can proceed.

 

The Myzox CL-28 and CL-36 Auto Levels provide road contractors, civil engineers and survey teams with an optical method for transferring benchmarks and checking elevations during road earthwork and formation preparation.

 

The Myzox CL-28 offers 28X magnification with ±2.0 mm accuracy for 1 km double-run leveling, while the Myzox CL-36 provides 36X magnification with ±1.0 mm accuracy.

 

MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia, supplying professional surveying instruments and accessories for construction and civil engineering applications.

 

What Is Road Formation Level?

 

Road formation generally refers to the prepared surface upon which subsequent pavement construction is carried out.

 

The exact definition and required elevation depend on the road design and project specifications.

 

Before subsequent road layers proceed, contractors may need to verify that the prepared formation follows the required design elevations.

 

Auto leveling can help compare actual site elevations with the specified levels.

 

Why Is Formation Level Important?

 

Incorrect formation elevation can affect later stages of road construction.

 

Potential consequences may include:

 

Additional excavation

 

Additional filling

 

Incorrect layer thickness

 

Drainage coordination problems

 

Additional material consumption

 

Rework

 

Construction delays

 

Checking elevations throughout the earthwork process can help identify discrepancies before later road layers are placed.

 

How Is an Auto Level Used for Road Formation?

 

A typical leveling process starts from an approved benchmark or temporary benchmark.

 

A simplified procedure may include:

 

Identify the approved benchmark.

 

Set up the Auto Level on stable ground.

 

Take a backsight reading.

 

Determine the Height of Instrument.

 

Position the leveling staff at the road formation point.

 

Take the staff reading.

 

Calculate the actual elevation.

 

Compare it with the design formation elevation.

 

Determine whether additional cut or fill is required.

 

Actual road surveying procedures should follow the approved project drawings, specifications and survey control.

 

Myzox CL-28 for Road Construction

 

The Myzox CL-28 provides:

 

Magnification: 28X

Objective Aperture: 36 mm

Minimum Focusing Distance: 0.4 m

1 km Double-Run Leveling Accuracy: ±2.0 mm

Self-Leveling Range: ±15′

Horizontal Circle: 360°

Weight: Approximately 1.3 kg

 

It can be considered for general road construction and civil engineering leveling where its specifications meet project requirements.

 

Myzox CL-36 for Larger Road Projects

 

The Myzox CL-36 provides:

 

Magnification: 36X

Objective Aperture: 36 mm

Minimum Focusing Distance: 0.4 m

1 km Double-Run Leveling Accuracy: ±1.0 mm

Self-Leveling Range: ±15′

Horizontal Circle: 360°

Weight: Approximately 1.3 kg

 

Its higher 36X magnification can be useful when observing a leveling staff across longer distances.

 

The ±1.0 mm leveling specification also makes the CL-36 attractive for users requiring greater specified accuracy.

 

Auto Level for Road Cut and Fill

 

Road construction frequently requires existing terrain to be reshaped.

 

Where existing ground is above design elevation, excavation or cut may be required.

 

Where existing ground is below the required elevation, fill may be required.

 

An Auto Level can help contractors monitor elevations throughout this process.

 

This allows site teams to determine whether individual points are:

 

Above design level

 

Below design level

 

Approaching formation level

 

At the required elevation

 

Auto Level for Embankment Construction

 

Road embankments may be constructed in multiple layers.

 

Elevation measurements can assist contractors in monitoring the developing profile and final formation.

 

The Auto Level is used for elevation control; soil density and compaction quality require separate testing equipment and procedures.

 

Road Formation and Drainage

 

Road formation and drainage elevations are closely related.

 

Road projects may include:

 

Side drains

 

Culverts

 

Catch pits

 

Manholes

 

Cross drainage

 

Stormwater systems

 

Accurate benchmark transfer helps road and drainage teams work from a consistent elevation reference.

 

Formation Level vs Finished Road Level

 

Road formation level should not automatically be confused with the final road surface elevation.

 

Depending on the pavement design, additional layers may be constructed above formation, such as:

 

Sub-base

 

Road base

 

Binder course

 

Wearing course

 

The exact pavement structure varies according to the project.

 

Always refer to the approved engineering drawings when determining the required target elevation.

 

Common Road Leveling Errors

 

Wrong Benchmark

 

Starting from an incorrect benchmark can affect every subsequent elevation.

 

Leveling Staff Not Vertical

 

A tilted staff can introduce measurement error.

 

Tripod on Unstable Ground

 

Road earthwork areas can contain soft or recently filled material. Make sure the tripod is stable.

 

Heat Shimmer

 

Long observations over hot road surfaces can make staff readings more difficult.

 

Recording Error

 

Incorrectly recording a reading can produce the wrong calculated elevation.

 

Confusing Different Design Levels

 

Make sure the site team distinguishes between formation, sub-base, road base and final pavement elevations.

 

Should Road Levels Be Rechecked?

 

Important road construction elevations should be verified according to the project's quality-control requirements.

 

Rechecking can be particularly valuable:

 

Before moving to the next pavement layer

 

After significant earthwork

 

After benchmark transfer

 

When measurements appear inconsistent

 

After an instrument has experienced an impact

 

CL-28 or CL-36 for Road Contractors?

 

Consider the CL-28 when:

 

General road or civil work is involved

 

Working distances are moderate

 

28X magnification is sufficient

 

±2.0 mm leveling specification meets project requirements

 

Consider the CL-36 when:

 

Larger road projects are involved

 

Longer observation distances are common

 

Higher 36X magnification is preferred

 

±1.0 mm leveling specification is required

 

Frequently Asked Questions

 

Can an Auto Level check road formation level?

 

Yes. An Auto Level can be used to determine actual elevations and compare them with required road formation elevations.

 

Can the Myzox CL-28 be used for road construction?

 

Yes, provided its accuracy and working characteristics meet the project's requirements.

 

Is the CL-36 suitable for highway projects?

 

Its 36X magnification and ±1.0 mm leveling specification make it an option for larger civil engineering and road projects.

 

Can an Auto Level calculate cut and fill?

 

It provides elevation measurements that can be used to determine differences between actual and design levels. More complete earthwork calculations may require additional survey data and software.

 

Is formation level the same as finished road level?

 

Not necessarily. Pavement layers are typically constructed above the prepared formation according to the road design.

 

Can an Auto Level check road drainage elevations?

 

Yes. It can assist with benchmark transfer and elevation checking for drains, culverts and related road infrastructure.

 

Myzox Auto Level for Road Contractors Malaysia

 

MTM Precision supplies Myzox CL-28, CL-36 and professional surveying equipment in Malaysia.

 

As an authorized distributor of Myzox in Malaysia, we support road contractors, civil engineers, infrastructure contractors and survey teams requiring professional equipment for road formation, earthwork and elevation checking.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact MTM Precision for enquiries about the Myzox CL-28, CL-36 Auto Level and professional surveying equipment for road construction in Malaysia.


 

16 Aug 2026