Myzox CL-28 CL-36 Auto Level for Foundation and Footing Level Malaysia

Myzox CL-28 CL-36 Auto Level for Foundation and Footing Level Malaysia

 

Accurate foundation and footing elevations are important during the early stages of building construction. Before concrete work proceeds, contractors need to confirm that excavation, blinding, footing and other structural reference levels correspond with the approved construction drawings.

 

The Myzox CL-28 and CL-36 Auto Levels provide a practical optical method for transferring benchmarks and checking foundation elevations on construction sites.

 

The Myzox CL-28 provides 28X magnification with ±2.0 mm accuracy for 1 km double-run leveling, while the Myzox CL-36 provides higher 36X magnification with ±1.0 mm accuracy.

 

MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia, supplying professional surveying instruments and accessories for building and civil engineering applications.

 

Why Is Foundation Level Important?

 

A building foundation transfers structural loads into the ground.

 

Before foundation construction proceeds, different elevations may need to be established or checked, including:

 

Excavation level

 

Blinding level

 

Footing level

 

Pile cap level

 

Ground beam level

 

Foundation reference level

 

Structural slab reference

 

The exact elevations depend on the structural design and approved construction drawings.

 

How Is an Auto Level Used for Foundation Work?

 

A known benchmark provides the starting elevation.

 

A simplified procedure may involve:

 

Identify the approved benchmark.

 

Set up the Myzox Auto Level on a stable tripod.

 

Take a backsight reading on the benchmark.

 

Calculate the Height of Instrument.

 

Move the leveling staff to the foundation area.

 

Take a staff reading.

 

Determine the actual elevation.

 

Compare the measured level with the required design elevation.

 

For critical structural work, measurements should follow the project's approved surveying and quality-control procedures.

 

Checking Foundation Excavation Depth

 

Before reinforcement and concrete work begin, excavation needs to reach the specified elevation.

 

If excavation is too shallow, additional material may need to be removed.

 

If it is too deep, corrective work may be required according to the project requirements.

 

Using an Auto Level allows contractors to check the excavation elevation at multiple points instead of relying only on visual judgement.

 

Checking Footing Level

 

Footings may require specific reference elevations before concrete placement.

 

An Auto Level can help transfer the project benchmark to the footing work area and establish temporary reference marks.

 

These marks can assist site teams when checking:

 

Excavation

 

Blinding

 

Formwork

 

Concrete reference elevations

 

Always distinguish between the different construction levels shown on the structural drawings.

 

Auto Level for Pile Cap Construction

 

Pile cap construction can also require reliable elevation control.

 

The leveling instrument can assist with checking elevations associated with:

 

Excavation

 

Blinding

 

Pile cut-off references

 

Formwork

 

Concrete works

 

Ground beam connections

 

The appropriate measurement method depends on the project design and survey control system.

 

Auto Level for Ground Beam Work

 

Ground beams often connect foundation elements and need to follow the structural design elevations.

 

An Auto Level can assist contractors in transferring consistent elevation references between different foundation locations.

 

This can be particularly useful on larger building sites with multiple footing or pile-cap locations.

 

Myzox CL-28 for General Foundation Work

 

The Myzox CL-28 provides:

 

Magnification: 28X

Objective Aperture: 36 mm

Minimum Focusing Distance: 0.4 m

1 km Double-Run Leveling Accuracy: ±2.0 mm

Self-Leveling Range: ±15′

Horizontal Circle: 360°

Weight: Approximately 1.3 kg

 

For routine building construction, the CL-28 provides a practical general-purpose leveling solution.

 

It can be considered for:

 

Residential construction

 

Commercial buildings

 

Shop lots

 

Factories

 

Warehouses

 

General foundation works

 

Myzox CL-36 for More Demanding Leveling

 

The Myzox CL-36 provides:

 

Magnification: 36X

Objective Aperture: 36 mm

Minimum Focusing Distance: 0.4 m

1 km Double-Run Leveling Accuracy: ±1.0 mm

Self-Leveling Range: ±15′

Horizontal Circle: 360°

Weight: Approximately 1.3 kg

 

For larger construction projects or applications where higher specified leveling accuracy is required, the CL-36 may be preferred.

 

Why Is Benchmark Control Important?

 

Foundation work should be tied to a reliable project benchmark.

 

If an incorrect elevation is transferred at the beginning of construction, the error can potentially continue into subsequent structural work.

 

Good practice includes:

 

Using approved benchmarks

 

Protecting temporary benchmarks

 

Clearly identifying reference points

 

Rechecking critical transferred levels

 

Recording observations correctly

 

Verifying instrument performance when necessary

 

Common Foundation Leveling Mistakes

 

Using the Wrong Reference Level

 

Do not confuse excavation, blinding, footing and finished structural levels.

 

Unstable Tripod

 

Excavation areas may contain loose or soft ground. Ensure the tripod is stable.

 

Staff Not Vertical

 

A tilted staff can affect the observed reading.

 

Calculation Error

 

Check Height of Instrument and Reduced Level calculations carefully.

 

Benchmark Disturbance

 

Construction activity can damage or move temporary reference marks.

 

Failure to Recheck Before Concrete

 

Critical elevations should be verified according to project procedures before irreversible construction stages proceed.

 

CL-28 or CL-36 for Building Contractors?

 

Choose the CL-28 when:

 

General foundation leveling is required

 

Observation distances are moderate

 

28X magnification is sufficient

 

±2.0 mm leveling specification meets project requirements

 

Consider the CL-36 when:

 

Higher 36X magnification is preferred

 

Larger construction sites are involved

 

Higher specified leveling accuracy is required

 

More demanding engineering leveling work is expected

 

Frequently Asked Questions

 

Can an Auto Level be used for foundation work?

 

Yes. An Auto Level can assist with transferring benchmarks and checking foundation-related elevations.

 

Can the Myzox CL-28 check footing levels?

 

Yes. It can be used for general building and foundation elevation measurements when its specification meets project requirements.

 

Can the CL-36 be used for pile cap work?

 

Yes. Its higher magnification and leveling specification can support professional construction elevation checks.

 

Can an Auto Level measure excavation depth?

 

By determining elevations before and during excavation, the required depth difference can be established.

 

Should foundation levels be checked before concrete pouring?

 

Critical construction elevations should be verified according to the project's quality-control requirements before work proceeds.

 

Which Myzox Auto Level is better for general building construction?

 

The CL-28 is a practical general-purpose option. The CL-36 should be considered when higher magnification or greater specified leveling accuracy is required.

 

Myzox Auto Level for Foundation Contractors Malaysia

 

MTM Precision supplies Myzox CL-28, CL-36 and professional surveying accessories in Malaysia.

 

As an authorized distributor of Myzox in Malaysia, we support building contractors, foundation contractors, civil engineers, site engineers and survey teams requiring professional equipment for foundation and footing level checking.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact MTM Precision for enquiries about the Myzox CL-28, CL-36 Auto Level and professional surveying equipment for foundation and building construction in Malaysia.


 

16 Aug 2026