Myzox CL-28 CL-36 Auto Level for Factory and Warehouse Construction Malaysia
Myzox CL-28 CL-36 Auto Level for Factory and Warehouse Construction Malaysia
Factory and warehouse construction projects often involve large floor areas, structural foundations, loading areas, external roads and drainage systems. Maintaining consistent elevation references throughout these areas is an important part of construction surveying.
The Myzox CL-28 and CL-36 Auto Levels provide contractors, engineers and survey teams with an optical solution for benchmark transfer and elevation checking during factory, warehouse and industrial building construction in Malaysia.
The Myzox CL-28 provides 28X magnification with ±2.0 mm accuracy for 1 km double-run leveling, while the Myzox CL-36 provides higher 36X magnification with ±1.0 mm accuracy.
MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia, supplying professional surveying instruments and accessories for construction and civil engineering applications.
Why Is Level Control Important in Factory Construction?
Industrial buildings can cover relatively large working areas.
Different parts of the project may need to coordinate with the same benchmark, including:
Foundations
Column bases
Ground beams
Concrete floors
Loading bays
External roads
Aprons
Drainage
Utility areas
Building entrances
An Auto Level helps transfer a known elevation reference between these locations.
Auto Level for Factory Foundation Work
Industrial structures may contain multiple foundation points across a large building footprint.
Elevation checks can be required during:
Excavation
Footing construction
Pile cap construction
Ground beam work
Blinding
Structural concrete work
Using a consistent benchmark helps different construction teams maintain a common vertical reference.
Auto Level for Warehouse Floor Level
Warehouse floors may extend across large areas.
Before and during floor construction, contractors may need to establish reference elevations at multiple locations.
An Auto Level can assist with transferring the required level around the work area.
These references may support checks associated with:
Subgrade
Sub-base
Concrete slab
Finished Floor Level
Door thresholds
Loading areas
The required tolerances should always follow the project's engineering specifications.
Finished Floor Level in Factory Buildings
Finished Floor Level, or FFL, can influence the relationship between the internal building floor and external areas.
These may include:
Loading bays
Access roads
Car parks
External pavements
Drainage
Ramps
Accurate benchmark transfer helps maintain consistency between these different elements.
Auto Level for Loading Bay Construction
Loading areas can require careful coordination between building floor levels and external pavement elevations.
Depending on the design, contractors may need to check:
Loading platform elevation
External pavement level
Ramp level
Drainage elevation
Building entrance level
An Auto Level can assist by transferring the project benchmark to the relevant locations.
Auto Level for Factory Drainage
Industrial developments may contain extensive drainage systems.
Elevation control may be required for:
Open drains
Underground drainage pipes
Manholes
Catch pits
Culverts
Stormwater systems
The Myzox CL series can help contractors determine elevations associated with these systems.
Auto Level for Factory Access Roads
Factory and warehouse developments often include internal access roads.
Auto Levels can support elevation checks during:
Earthworks
Cut and fill
Road formation
Drainage
Pavement preparation
For larger industrial developments, the CL-36's higher magnification may be particularly useful.
Myzox CL-28 for General Industrial Construction
The Myzox CL-28 provides:
Magnification: 28X
Objective Aperture: 36 mm
Minimum Focusing Distance: 0.4 m
1 km Double-Run Leveling Accuracy: ±2.0 mm
Self-Leveling Range: ±15′
Horizontal Circle: 360°
Weight: Approximately 1.3 kg
The CL-28 can be considered for general factory and warehouse construction where normal working distances and its specified accuracy meet project requirements.
Myzox CL-36 for Larger Industrial Projects
The Myzox CL-36 provides:
Magnification: 36X
Objective Aperture: 36 mm
Minimum Focusing Distance: 0.4 m
1 km Double-Run Leveling Accuracy: ±1.0 mm
Self-Leveling Range: ±15′
Horizontal Circle: 360°
Weight: Approximately 1.3 kg
Its higher magnification and leveling specification make it attractive for:
Large factories
Logistics warehouses
Industrial parks
Manufacturing facilities
Large distribution centres
Infrastructure associated with industrial developments
Why Might CL-36 Be Useful on a Large Warehouse Site?
A large industrial site can involve longer observation distances than a small residential project.
The CL-36 provides 36X magnification, compared with 28X for the CL-28.
This can make staff graduations appear larger when observing at greater distances.
However, excessive sight distances should still be avoided where environmental conditions or project procedures make shorter observations preferable.
Auto Level vs Total Station for Factory Construction
Both instruments can play different roles.
Auto Level
Useful for:
Benchmark transfer
Foundation elevation
Floor levels
Drainage elevation
Road formation levels
Total Station
Useful for:
Column positions
Building coordinates
Structural setting out
Distance measurement
Angle measurement
Many industrial construction projects may therefore use both.
Auto Level vs Rotating Laser for Warehouse Floors
A rotating laser can be useful when a large number of repetitive level checks are required across a floor area.
An Auto Level remains useful for establishing and verifying benchmark-based elevations.
A possible workflow is to use an Auto Level for survey control and a rotating laser for selected construction operations, depending on project requirements.
Common Industrial Construction Leveling Mistakes
Benchmark Is Disturbed
Heavy machinery and construction activity can damage temporary benchmarks.
Tripod Is Set on Unstable Ground
Earthwork and filled areas may settle under tripod legs.
Excessively Long Sight Distances
Large factory sites may encourage very long observations. Appropriate sight distances should be maintained.
Heat Shimmer
Hot external surfaces can affect optical visibility over longer distances.
Different Teams Use Different References
Foundation, floor, drainage and road teams should work from properly coordinated elevation control.
Instrument Is Not Checked
If an Auto Level has been dropped or produces inconsistent readings, verify its performance before critical work continues.
Frequently Asked Questions
Can Myzox CL-28 be used for factory construction?
Yes. It can support general foundation, floor, drainage and construction elevation checks.
Is Myzox CL-36 suitable for large warehouses?
Yes. Its 36X magnification and ±1.0 mm leveling specification make it attractive for larger construction sites.
Can an Auto Level check warehouse floor level?
Yes. It can assist with benchmark transfer and elevation checking across warehouse floor areas.
Can an Auto Level be used for loading bay construction?
Yes. It can help establish and check elevations associated with loading areas, ramps and external pavement.
Can the same Auto Level be used for factory drainage?
Yes. The instrument can also support elevation checking for drainage, manholes and related infrastructure.
Which model is better for large industrial sites?
The CL-36 may be preferable when higher magnification and greater specified leveling accuracy are required.
Myzox Auto Level for Factory and Warehouse Contractors Malaysia
MTM Precision supplies Myzox CL-28, CL-36 and professional surveying equipment in Malaysia.
As an authorized distributor of Myzox in Malaysia, we support industrial contractors, factory builders, warehouse contractors, civil engineers and survey teams requiring reliable leveling equipment.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Contact MTM Precision for enquiries about the Myzox CL-28, CL-36 Auto Level and professional surveying equipment for factory, warehouse and industrial construction in Malaysia.
16 Aug 2026