How to Monitor Warehouse Temperature & Humidity 24 Hours Malaysia

How to Monitor Warehouse Temperature & Humidity 24 Hours Malaysia

 

What happens inside your warehouse after everyone goes home?

 

During working hours, staff can check a thermometer or thermo-hygrometer.

 

But what happens at:

 

11:00 PM?

 

2:00 AM?

 

5:00 AM?

 

What happens when the air-conditioning changes operating mode, rain increases outdoor humidity, or a refrigeration system cycles overnight?

 

For businesses that need to understand these changes, a temperature and humidity data logger provides a simple way to monitor warehouse conditions automatically for 24 hours or longer.

 

The Benetech GM1365 Temperature & Humidity Data Logger can record environmental conditions while the warehouse is unattended, allowing users to review the historical data later.

 

Why One Temperature Check Per Day Is Not Enough

 

Imagine your warehouse staff record:

 

9:00 AM → 25°C

 

1:00 PM → 26°C

 

5:00 PM → 26°C

 

Everything appears normal.

 

But the real environmental pattern could be:

 

9:00 AM → 25°C

 

1:00 PM → 26°C

 

4:00 PM → 30°C

 

8:00 PM → 28°C

 

1:00 AM → 27°C

 

4:00 AM → Humidity increases

 

8:00 AM → 25°C again

 

If staff only measure during working hours, important environmental changes can be missed.

 

A Data Logger Works While Nobody Is There

 

This is the key advantage.

 

Instead of asking an employee to manually record readings throughout the night:

 

Configure → Place → Record Automatically → Retrieve → Analyse

 

The logger continues collecting measurements during:

 

Working hours

 

Lunch breaks

 

Nighttime

 

Weekends

 

Public holidays

 

Unattended periods

 

This provides a much more complete picture of warehouse conditions.

 

What Should You Monitor?

 

For many warehouses, two useful environmental parameters are:

 

Temperature

 

and

 

Relative Humidity

 

Temperature can reveal heat accumulation and cooling patterns.

 

Humidity can provide useful information about moisture conditions and environmental changes.

 

GM1365 records both parameters.

 

Start With a 24-Hour Test

 

If you have never monitored your warehouse before, start simply.

 

Deploy the logger for at least one complete day/night cycle.

 

This can reveal:

 

Morning Conditions

 

↓

 

Afternoon Conditions

 

↓

 

Evening Conditions

 

↓

 

Overnight Conditions

 

↓

 

Next Morning

 

Even this basic monitoring exercise can reveal patterns that manual daytime checking misses.

 

Why 7-Day Monitoring Can Be Better

 

A single day may not represent normal warehouse operation.

 

Conditions can change because of:

 

Weather

 

Production activity

 

Loading schedules

 

Air-conditioning

 

Weekends

 

Rain

 

Occupancy

 

A longer monitoring period can reveal whether a pattern is repeated.

 

For example:

 

Monday → Afternoon temperature increase

 

Tuesday → Same

 

Wednesday → Same

 

Thursday → Same

 

Friday → Same

 

Now you have evidence of a recurring environmental pattern.

 

What Happens During Weekends?

 

Weekend monitoring can be particularly useful.

 

Some facilities change:

 

Air-conditioning schedules

 

Ventilation

 

Production

 

Staffing

 

Door activity

 

during weekends.

 

A warehouse may appear perfectly stable Monday to Friday but behave differently on Saturday and Sunday.

 

Automatic logging allows users to see the difference.

 

Where Should You Put the Logger?

 

Placement depends on the monitoring objective.

 

For general warehouse investigation, possible locations include:

 

Centre Warehouse

 

Loading Area

 

Upper Rack

 

Lower Rack

 

Near External Wall

 

Far Corner

 

Avoid assuming that one convenient location represents the entire warehouse.

 

One Logger vs Multiple Loggers

 

For a small room, one logger may be useful for a preliminary investigation.

 

For a larger warehouse, environmental conditions may vary significantly.

 

A practical multi-point setup could be:

 

GM1365 #1 → Loading Door

 

GM1365 #2 → Centre Warehouse

 

GM1365 #3 → Upper Rack

 

GM1365 #4 → Lower Rack

 

After several days, compare the recorded data.

 

This can help identify hot spots or areas with different humidity behaviour.

 

Why Upper Racks Matter

 

High-rack warehouses deserve special attention.

 

Conditions near the roof may differ from those near floor level because of:

 

Heat accumulation

 

Roof exposure

 

Air movement

 

Building design

 

If products are stored at multiple heights, measuring only at desk level may not represent the conditions experienced by all stored goods.

 

Loading Doors Can Create Environmental Changes

 

Loading and unloading can introduce outside air.

 

In Malaysia, this can mean exposure to warm and humid outdoor conditions.

 

A logger near the loading area may help determine:

 

How much conditions change when doors open

 

How long recovery takes

 

Whether humidity increases

 

Whether the effect reaches deeper into the warehouse

 

This information can be useful for facility management.

 

Monitor Before and After HVAC Changes

 

Suppose the warehouse is too warm and the HVAC contractor makes an adjustment.

 

How do you know whether conditions improved?

 

Use the same monitoring approach:

 

Before Adjustment → Record

 

↓

 

HVAC Work

 

↓

 

After Adjustment → Record Again

 

↓

 

Compare

 

This provides more useful evidence than relying only on whether the room “feels cooler”.

 

Example: Finding an Afternoon Hot Spot

 

A warehouse manager notices that staff complain about heat every afternoon.

 

Three loggers are deployed.

 

After several days:

 

Logger A — Ground Level: Relatively stable

 

Logger B — Centre: Moderate increase

 

Logger C — Upper Rack: Significant afternoon increase

 

Now the investigation has a direction.

 

Instead of saying:

 

“The whole warehouse is hot.”

 

the facility team can investigate:

 

“Why does the upper storage zone experience higher afternoon temperature?”

 

This is a much better engineering question.

 

Example: Humidity Increases Overnight

 

Another warehouse may have no obvious temperature problem.

 

But the data shows:

 

Daytime → Lower relative humidity

 

Night → Humidity gradually increases

 

Early morning → Highest humidity

 

Working hours → Humidity decreases again

 

This pattern could easily be missed with manual daytime measurements.

 

The data does not automatically identify the cause, but it provides evidence for further investigation.

 

Can GM1365 Send an Alarm to My Phone?

 

This is an important distinction.

 

A standalone logger is primarily designed to:

 

Record Now → Review Later

 

If your requirement is:

 

Temperature Exceeds Limit → Immediately Send Alert to Phone

 

then you may need a Wi-Fi, cellular or cloud-based remote monitoring system.

 

The two solutions serve different needs.

 

GM1365 vs Remote Monitoring

 

GM1365-Type Standalone Logger

 

Suitable for:

 

Warehouse surveys

 

Temporary monitoring

 

Troubleshooting

 

Historical recording

 

Comparing locations

 

Remote Monitoring System

 

More appropriate for:

 

Permanent 24/7 monitoring

 

Live dashboards

 

Immediate alarms

 

Remote access

 

Multiple permanent locations

 

Do not overcomplicate a simple investigation, but also do not use a basic logger when immediate alerts are essential.

 

Use the Data to Answer a Question

 

Don't collect data simply because the instrument can record it.

 

Start with a question.

 

For example:

 

Does the warehouse become hotter after 2:00 PM?

 

Does humidity increase overnight?

 

Is the upper rack hotter than the lower rack?

 

What happens when the loading door opens?

 

Does the HVAC adjustment improve conditions?

 

Then configure and position the loggers to answer that question.

 

This makes environmental monitoring much more useful.

 

A Simple Warehouse Monitoring Plan

 

For many businesses, the process can begin with:

 

Step 1 — Identify the Problem

 

What do you suspect?

 

↓

 

Step 2 — Select Monitoring Locations

 

Choose representative and suspected problem areas.

 

↓

 

Step 3 — Deploy Data Loggers

 

Record temperature and humidity automatically.

 

↓

 

Step 4 — Monitor 24 Hours to 7 Days

 

Capture both occupied and unattended periods.

 

↓

 

Step 5 — Download the Data

 

Review the environmental trends.

 

↓

 

Step 6 — Compare Locations and Times

 

Look for repeated patterns.

 

↓

 

Step 7 — Take Corrective Action

 

Investigate HVAC, ventilation, loading practices or other relevant factors.

 

↓

 

Step 8 — Monitor Again

 

Check whether conditions improved.

 

Who Can Use This Approach?

 

24-hour temperature and humidity logging can be useful for:

 

General warehouses

 

Food storage

 

Electronics warehouses

 

Manufacturing facilities

 

Agricultural storage

 

Laboratories

 

Equipment rooms

 

Distribution centres

 

Facility-management teams

 

HVAC contractors

 

The required environmental limits depend on the actual products and processes involved.

 

Why GM1365 Can Be a Practical Starting Point

 

The Benetech GM1365 provides the core functions needed for many basic environmental investigations:

 

Temperature

 

Humidity

 

Automatic Recording

 

Historical Data

 

Computer Analysis

 

For customers who do not need a complex permanent cloud monitoring system, this can be a practical way to start understanding warehouse conditions.

 

Looking for 24-Hour Warehouse Temperature Monitoring in Malaysia?

 

MTM Precision supplies the Benetech GM1365 Temperature & Humidity Data Logger and other environmental monitoring instruments for warehouses, factories, laboratories and commercial facilities in Malaysia.

 

Tell us:

 

Warehouse Size + Application + What You Store + Monitoring Duration + Number of Areas

 

and we can help you identify a practical monitoring solution.

 

Don't only ask:

 

“What is my warehouse temperature now?”

 

A more useful question may be:

 

“What happens inside my warehouse during the entire 24 hours?”

 

Contact MTM Precision

 

MTM Precision Sdn Bhd

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

WhatsApp: +6016-660 7346

Email: mtmpre@yahoo.com

 

Day → Night → Weekend → 24-Hour Environmental Monitoring

 

Benetech GM1365 — Available from MTM Precision Malaysia


 

23 Aug 2026