How to Investigate Cold Chain Temperature Excursions Malaysia
How to Investigate Cold Chain Temperature Excursions Malaysia
A customer receives temperature-sensitive goods and reports:
“The temperature was too high.”
Where did the problem happen?
Was it:
Cold Room → Loading → Transport → Unloading → Temporary Storage → Final Delivery?
This is the real challenge in cold-chain troubleshooting.
Checking the temperature only after the problem occurs may not tell you where or when the excursion happened.
A temperature data logger creates a historical record that can help businesses investigate the timeline.
For general temperature and humidity investigations at fixed locations, the Benetech GM1365 Temperature & Humidity Data Logger can be a useful tool where its specifications meet the application.
For shipment monitoring or regulated cold-chain applications, a specialised logistics logger may be more appropriate.
What Is a Temperature Excursion?
A temperature excursion generally refers to a period when monitored temperature moves outside the limits established for the product or process.
The important questions are not only:
Did temperature change?
but also:
When did it happen?
How high or low did it go?
How long did it last?
Where was the product at that time?
Historical data can help answer these questions.
The Cold Chain Is a Process, Not Just a Cold Room
Many businesses focus heavily on cold-room temperature.
But the complete movement of goods may involve:
Storage
↓
Picking
↓
Staging
↓
Loading
↓
Transport
↓
Unloading
↓
Temporary Storage
↓
Customer Receipt
A temperature problem can potentially occur at any stage.
This is why troubleshooting should look at the entire process.
Step 1: Check the Cold Room
Start with the storage environment.
Questions include:
Is the room stable throughout 24 hours?
Are there temperature differences between locations?
What happens during defrost or operating cycles?
What happens when doors open?
Are upper and lower storage areas different?
A reusable logger can help investigate these patterns.
Step 2: Check the Loading Area
Goods may leave a controlled environment before being loaded into the vehicle.
How long do they remain in the staging area?
Consider this timeline:
10:00 AM → Product removed from cold room
10:10 AM → Waiting for loading
10:40 AM → Vehicle arrives
11:00 AM → Loading completed
Even if the cold room is performing correctly, the loading process may create a significant period outside the controlled environment.
A logger can help identify what happens during this stage.
Step 3: Investigate Door Opening
Door opening can affect environmental conditions.
For example:
Door Opens
↓
Warm Air Enters
↓
Temperature Changes
↓
Door Closes
↓
Cooling System Recovers
A data logger can help show how quickly conditions change and how long recovery takes.
This can be useful when comparing normal operation with periods of heavy loading activity.
Step 4: Check Transport Requirements
This is where logger selection becomes important.
If the logger must travel with the shipment from:
Malaysia → Customer
then a shipment-oriented data logger may be more suitable than a general reusable room-monitoring logger.
The ideal logistics logger may need features such as:
Simple shipment activation
Appropriate temperature range
Suitable memory
Easy report generation
Shipment identification
Appropriate accuracy
Required calibration/documentation
Choose according to the actual transport requirement.
Step 5: Check Unloading
The vehicle may maintain temperature correctly, but what happens after arrival?
Goods may remain:
Inside Vehicle
↓
Loading Bay
↓
Receiving Area
↓
Temporary Holding Area
↓
Customer Storage
If the investigation ends when the truck arrives, part of the temperature history may be missed.
Use Time to Identify the Problem
Suppose the recorded data shows:
8:00 AM–10:00 AM → Stable
10:15 AM → Temperature begins increasing
10:50 AM → Highest recorded period
11:10 AM → Temperature begins recovering
Now compare this against operational records.
What happened at 10:15 AM?
Perhaps:
Goods left storage
Door opened
Loading started
Refrigeration stopped
Vehicle was waiting
The logger does not automatically tell you the cause.
It tells you when to investigate.
Why Time Synchronisation Matters
If you want to compare logger data with operational events, correct time settings are essential.
Before monitoring, check:
Date
Time
Recording Interval
Start Time
If the logger clock is incorrect, matching the data with loading or transport events becomes much harder.
Recording Interval Matters
Imagine an excursion lasts only a short period.
If the recording interval is too long, the logger may provide insufficient detail to understand the event.
On the other hand, an extremely short interval creates more data and uses more memory.
Select the logging interval according to:
Expected Event Duration + Monitoring Period + Required Detail
Temperature vs Product Temperature
This is another important distinction.
A logger measuring surrounding air temperature does not necessarily measure the internal temperature of the product.
These are different measurements:
Air Temperature
vs
Surface Temperature
vs
Product Core Temperature
The correct measurement method depends on the application.
Do not assume they are interchangeable.
What About Humidity?
Cold-chain discussions often focus primarily on temperature.
However, relative humidity may also be useful in certain storage and environmental investigations.
The GM1365 records:
Temperature + Relative Humidity
This can provide additional environmental information when investigating:
Storage areas
Warehouses
Packaging environments
General facility conditions
Whether humidity is important depends on the product and process.
GM1365 for Cold Room Troubleshooting
For a fixed cold-room investigation, a reusable logger can help answer questions such as:
What happens overnight?
What happens during door opening?
Are some areas warmer?
Does temperature recover quickly?
Are conditions different during weekends?
Does humidity change with operating conditions?
Where the GM1365's specified operating and measurement capabilities are suitable, it can be used as part of this type of general investigation.
Multiple Loggers Can Reveal Different Zones
One monitoring point may not represent an entire storage area.
For preliminary investigation:
Logger A → Near Door
Logger B → Centre
Logger C → Upper Storage
Logger D → Lower Storage
Logger E → Far from Cooling Source
Compare the readings over the same period.
This can help reveal environmental differences within the room.
GM1365 vs Shipment Data Logger
These products should not automatically be treated as the same solution.
GM1365-Type Reusable Logger
Better suited to:
Fixed-location investigation
Repeated monitoring
Cold-room troubleshooting
Warehouse monitoring
Environmental trend analysis
Shipment Logger
Better suited to:
Travelling with goods
Delivery verification
One-way logistics
Transport records
Shipment-specific reporting
The application should determine the logger type.
What If You Need Real-Time Alerts?
Suppose temperature exceeds the limit at 2:00 AM.
Do you need to know:
Tomorrow morning?
or
Immediately at 2:00 AM?
If immediate notification is required, a standalone logger may not be enough.
Consider a monitoring solution capable of:
Remote connectivity
Live monitoring
Alarm notifications
Centralised data
Multiple sensors
This is particularly important when delayed action could have serious consequences.
Don't Blame the Refrigeration System Too Quickly
A temperature excursion does not automatically mean:
“Cold room faulty.”
Possible contributors can include:
Loading delays
Door opening
Product handling
Vehicle operation
Staging time
Sensor placement
Refrigeration performance
Unloading delays
Good troubleshooting uses data to narrow the investigation.
Build a Temperature Timeline
A useful approach is to combine logger data with operational events.
For example:
TimeEventTemperature Observation8:00 AMGoods in storageStable9:45 AMPicking startsStable10:10 AMGoods moved to stagingTemperature begins changing10:40 AMLoading beginsElevated11:00 AMVehicle departsConditions recover/change
This makes the environmental record easier to interpret.
A Simple Cold Chain Investigation Workflow
Use this approach:
1. Identify the excursion
↓
2. Establish the timeline
↓
3. Review logger data
↓
4. Compare with operational events
↓
5. Identify the stage where conditions changed
↓
6. Investigate the likely cause
↓
7. Implement corrective action
↓
8. Monitor again
The final step is important.
After making improvements, collect data again to determine whether the situation improved.
Which Customers May Need This?
Potential users include:
Food distributors
Cold-room operators
Frozen-food businesses
Logistics companies
Warehouses
Agricultural suppliers
Laboratories
Manufacturing facilities
QA/QC departments
Facility-management teams
For regulated pharmaceutical, vaccine or other critical cold-chain applications, the monitoring system should be selected according to the applicable accuracy, calibration, validation, data integrity and documentation requirements.
Looking for Cold Chain Temperature Monitoring Equipment in Malaysia?
MTM Precision supplies the Benetech GM1365 Temperature & Humidity Data Logger together with other temperature and environmental monitoring instruments for Malaysian businesses.
If you are experiencing a temperature excursion, don't start by asking only:
“Which logger should I buy?”
Tell us:
What Product → Storage Temperature → Fixed Room or Transport → Monitoring Duration → Need Historical Data or Immediate Alarm
MTM Precision can help identify which type of monitoring solution better matches the application.
Contact MTM Precision
MTM Precision Sdn Bhd
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Cold Room → Loading → Transport → Unloading → Find Where the Temperature Changed
Temperature & Environmental Monitoring Solutions — MTM Precision Malaysia
23 Aug 2026