Landtek FM-207-500K Digital Force Gauge for Push and Pull Testing Malaysia
Landtek FM-207-500K Digital Force Gauge for Push and Pull Testing Malaysia
The Landtek FM-207-500K Digital Force Gauge is designed for high-capacity push force, pull force, tension and compression testing. With a measuring range of up to ±500 kgf, ±4900 N or ±1100 lbf, it is suitable for industrial applications where an ordinary handheld force gauge does not provide sufficient capacity.
The FM-207-500K uses an external force sensor, allowing the sensor to be installed on a suitable test fixture or structure while the operator monitors the measurement from the separate digital display.
It is suitable for manufacturing plants, quality-control departments, engineering workshops, testing laboratories and maintenance teams in Malaysia.
What Can the Landtek FM-207-500K Measure?
The instrument can measure force in two directions:
Pull force or tension
Push force or compression
Typical tests include:
Cable, wire and rope pull-force testing
Hook and fastener load testing
Component compression testing
Assembly pulling-force inspection
Connector and mechanical-joint testing
Spring and structural-component testing
Destructive and breaking-force testing
Production quality-control inspections
The actual test arrangement depends on the product, fixture, loading direction and required testing procedure.
Main Specifications
Model: Landtek FM-207-500K
Force range: ±500 kgf
Newton range: ±4900 N
Pound-force range: ±1100 lbf
Accuracy: ±0.2% FS ±1 digit
Measurement modes: Real-time measurement and peak-value measurement
Selectable units: kgf, N and lbf
Data memory: Up to 99 measurement records
Display: Dual-direction four-digit LCD
Backlight: Blue backlight
Safe load: 150% of full scale
Overload warning: Buzzer warning above 110% of full scale
Data output: USB or optional Bluetooth connection
Power supply: AA batteries or external DC power supply
Sensor type: External force sensor
Real-Time and Peak-Value Measurement
The FM-207-500K provides two useful measurement modes.
Real-Time Measurement
In real-time mode, the displayed reading changes continuously as the applied load increases or decreases. This mode is useful when operators need to observe how force changes during a test.
Peak-Value Measurement
Peak mode captures and retains the highest force recorded during the test. It is particularly helpful for:
Breaking-force tests
Maximum pulling-force tests
Release-force measurements
Compression-limit testing
Product quality comparisons
The operator does not need to watch the display continuously to record the maximum result.
Why Use an External Sensor?
For forces approaching 500 kgf, the test normally requires a strong and stable mechanical arrangement. An external sensor provides greater flexibility when installing the system on a test stand, fixture or customised testing structure.
This configuration allows users to:
Position the sensor closer to the test sample
Read the display from a safer or more convenient position
Integrate the sensor into an existing test fixture
Perform both tension and compression measurements
Reduce handling difficulty during high-force testing
A proper test stand or fixture is strongly recommended. The gauge itself generates no pulling or pushing forceit measures the force applied through the sensor.
Suitable Industries in Malaysia
The Landtek FM-207-500K can support force testing in:
Metal fabrication
Automotive-parts manufacturing
Cable and wire production
Construction hardware
Machinery assembly
Packaging operations
Electrical-component manufacturing
Research and development
Quality-control laboratories
Engineering and maintenance workshops
It can also be used for customised testing applications when paired with an appropriate fixture.
Important Testing Precautions
To obtain reliable measurements:
Confirm that the expected force is within the instrument’s measuring range.
Align the sensor with the direction of the applied force.
Avoid side loading, twisting or sudden impact on the sensor.
Zero the instrument after installing the sensor and fixture.
Use a stable test stand for high-force measurements.
Check that all hooks, links and fixtures have adequate load capacity.
Increase the load gradually during the test.
Stop immediately if an overload warning appears.
For improved measurement performance, the expected working force should ideally fall within the instrument’s effective operating range rather than being extremely close to zero.
FM-207-500K Frequently Asked Questions
Can it measure both pulling and pushing force?
Yes. The FM-207-500K can measure both tension and compression, provided the sensor and fixture are installed correctly.
What is its maximum measuring capacity?
It maximum measuring range is ±500 kgf, equivalent to approximately ±4900 N or ±1100 lbf.
Does it display the maximum force?
Yes. Its peak-value mode captures and holds the maximum measured force.
Can the measurement results be saved?
Yes. The instrument can store up to 99 measurement records for review.
Can it transfer data to a computer?
The FM-207 series supports data output through a suitable USB connection or optional Bluetooth adapter. Available accessories should be confirmed before ordering.
Does the package include a test stand?
A test stand is normally selected separately. The correct stand or fixture depends on the required load, sample dimensions and test method.
Is it suitable for certified load testing?
The FM-207-500K is suitable for industrial force measurement and quality-control applications. If the result must comply with a particular regulatory or accredited testing requirement, the applicable standard, calibration scope and documentation should be confirmed before purchase.
Order the Landtek FM-207-500K in Malaysia
MTM Precision supplies the Landtek FM-207-500K Digital Force Gauge for industrial push, pull, tension and compression testing in Malaysia.
Send us the following information for model and fixture evaluation:
Product or component being tested
Expected maximum force
Push or pull test requirement
Sample dimensions
Preferred measurement unit
Required test stand or fixture
Calibration or documentation requirements
Contact MTM Precision
MTM Precision Sdn. Bhd. (744811-A)
Telephone: +603-8080 7172
WhatsApp: +6019-665 7346 / +6016-660 7346
Email: mtmpre@yahoo.com / enquiry@mtmpre.com.my
Website: www.mtmpre.com.my
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar Lapan Belas,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Supply and technical support are available for customers in Selangor, Kuala Lumpur, Johor, Penang, Perak, Melaka, Negeri Sembilan, Pahang, Kedah, Perlis, Terengganu, Kelantan, Sarawak and Sabah.
16 Sep 2026
