DITRON 801 & 602A Series IP54 Digital Calipers | Large Screen & Absolute Measurement Malaysia
DITRON 801 and 602A Series IP54 Digital Calipers
The DITRON 801 and 602A series offer catalogue-stated IP54 protection, zinc alloy display housings and 4Cr13 stainless steel rulers. Both series are available in 150mm, 200mm and 300mm measuring ranges.
The 801 series emphasises a large digital display, while the 602A series features absolute measurement. Both support outside, inside, step and depth measurement, with the same catalogue-stated accuracy at corresponding ranges.
PRODUCT HIGHLIGHTS
• IP54 protection, as stated in the manufacturer’s catalogue.
• Zinc alloy display housing.
• 4Cr13 stainless steel ruler.
• Optical glass fixed grid.
• Outside, inside, step and depth measurement.
• Automatic power-on.
• Automatic power-off after five minutes of inactivity.
• Resolution: 0.01mm / 0.0005in.
• Large display on the 801 series.
• Absolute measurement on the 602A series.
801 SERIES — LARGE-SCREEN IP54 DIGITAL CALIPERS
The DITRON 801 series combines a large digital display with a zinc alloy housing for routine dimensional checks.
The catalogue lists automatic power-on and automatic power-off after five minutes of inactivity. Inch fraction display is optional and should be specified when ordering.
Available models:
DITRON 801-150
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
DITRON 801-200
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
DITRON 801-300
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
602A SERIES — ABSOLUTE IP54 DIGITAL CALIPERS
The DITRON 602A series features absolute measurement, a zinc alloy display housing and a 4Cr13 stainless steel ruler.
Absolute measurement is the main functional distinction highlighted for this series. Customers using reference-based inspection procedures should confirm the origin-setting and reference-handling functions in the supplied operating manual.
The catalogue also lists automatic power-on and automatic power-off after five minutes of inactivity.
Available models:
DITRON 602A-150
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
DITRON 602A-200
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
DITRON 602A-300
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
801 VS 602A — WHICH SERIES SHOULD YOU CHOOSE?
Choose the 801 series when you prefer:
• A large digital display.
• IP54 protection.
• A zinc alloy display housing.
• Optional inch fraction display, subject to configuration confirmation.
Choose the 602A series when you require:
• Absolute measurement.
• IP54 protection.
• A zinc alloy display housing.
• A choice of 150mm, 200mm or 300mm capacity.
The 602A absolute function does not provide higher catalogue-stated accuracy. Compare the measuring workflow and display preference as well as the required range.
IP54 PROTECTION FOR WORKSHOP USE
The manufacturer describes both series as offering protection against splashes and dust.
Use this protection feature as one part of the selection process for workshop and inspection environments. IP54 should not be treated as permission to immerse the instrument or clean it with pressurised water.
For work involving coolant, oil or cleaning chemicals, confirm compatibility and permitted exposure before purchase. Keep the measuring faces clean because debris between the jaws and workpiece can affect readings.
CHOOSING THE MEASURING RANGE
150mm Models
Suitable for smaller components, fasteners and general dimensional checks within the measuring capacity.
200mm Models
Provide additional opening capacity for components that exceed a 150mm range.
300mm Models
Provide up to 300mm measuring capacity for larger workpieces. Check jaw reach and access around the component before selecting.
Choose a range that covers your workpieces while meeting your accuracy requirements.
FOUR MEASUREMENT FUNCTIONS
Outside Measurement
Use the external jaws to measure accessible dimensions such as thickness, width and outside diameter.
Inside Measurement
Use the internal jaws to check accessible internal dimensions. Correct alignment is important for consistent results.
Step Measurement
Use the step measuring faces to check suitable stepped features.
Depth Measurement
Use the depth rod to measure accessible hole or recess depths. Keep the reference face seated against the workpiece.
APPLICATIONS IN MALAYSIA
The DITRON 801 and 602A series can be considered for:
• Machining workshop measurements.
• Metal fabrication dimensional checks.
• Incoming component inspection.
• Maintenance workshop tasks.
• Production and assembly checks.
• Technical training.
For factories and workshops in Selangor, Kuala Lumpur, Johor and Penang, select the caliper according to workpiece dimensions, required tolerances and environmental conditions.
Where tolerances are tight, assess whether a micrometer or another measuring instrument is more appropriate.
RESOLUTION AND ACCURACY
Both series have a metric display resolution of 0.01mm. Resolution describes the displayed increment and is different from measurement accuracy.
Catalogue-stated accuracy by measuring range:
0–150mm: ±0.02mm
0–200mm: ±0.03mm
0–300mm: ±0.04mm
Measuring technique, jaw alignment, cleanliness, temperature and instrument condition can also affect results.
CARE AND BASIC CHECKS
• Clean the measuring faces and workpiece before use.
• Close the jaws gently and check the zero reading.
• Apply light, consistent measuring force.
• Align the caliper with the dimension being measured.
• Remove chips and residue before closing the jaws.
• Avoid measuring hot or moving components.
• Follow the manufacturer’s cleaning and storage instructions.
• Check performance against suitable reference standards according to your quality procedure.
If readings become inconsistent, check cleanliness, zero and measuring technique before arranging further inspection.
FREQUENTLY ASKED QUESTIONS
What is the main difference between the 801 and 602A series?
The 801 series highlights a large display. The 602A series highlights absolute measurement. Both have catalogue-stated IP54 protection and zinc alloy housings.
What does ABS mean on the 602A catalogue?
It refers to absolute measurement. The housing is separately described as zinc alloy.
Are both series IP54?
Yes. The supplied catalogue page lists IP54 protection for both series.
Can these calipers be immersed in water?
Do not treat IP54 as an immersion rating. Follow the manufacturer’s permitted exposure and care instructions.
Are these rechargeable calipers?
Rechargeable operation and Type-C charging are not listed on this page. Confirm the battery type and power arrangement before ordering.
Do they have Bluetooth?
Bluetooth is not listed for either series on the supplied catalogue page.
Is inch fraction display available?
It is listed as optional for the 801 series. The supplied page does not list this option for the 602A series.
Do they switch off automatically?
The catalogue specifies automatic power-off after five minutes of inactivity for both series.
Can they measure depth?
Yes. Outside, inside, step and depth measurement are listed for both series.
Is a calibration certificate included?
The catalogue displays a DIN 862 marking but does not confirm that an individual calibration certificate is supplied. Specify documentation requirements when requesting a quotation.
SEO META DESCRIPTION
Compare DITRON 801 and 602A IP54 digital calipers in Malaysia. Explore large-screen and absolute models in 150mm, 200mm and 300mm ranges.
ENQUIRE ABOUT DITRON IP54 DIGITAL CALIPERS
Contact MTM Precision with your preferred series, measuring range, quantity and application. Please specify any absolute measurement, inch fraction display or calibration documentation requirements.
Availability, battery details, optional features and supplied accessories are subject to confirmation.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
24 Oct 2026
