DITRON 607 Series IP67 Absolute Digital Calipers | 150mm, 200mm & 300mm Malaysia
DITRON 607 Series IP67 Absolute Digital Calipers
The DITRON 607 series combines catalogue-stated IP67 protection with an absolute inductive measuring system. Available in 150mm, 200mm and 300mm ranges, these digital calipers support outside, inside, step and depth measurement.
For machining workshops and inspection departments in Malaysia, the main selection features are environmental protection, absolute position measurement and measuring capacity.
PRODUCT HIGHLIGHTS
• IP67 protection, as stated in the manufacturer’s catalogue.
• Absolute measuring system.
• Inductive sensing technology.
• Plastic display housing.
• 4Cr13 stainless steel ruler.
• Outside, inside, step and depth measurement.
• Resolution: 0.01mm / 0.0005in.
• Choice of 150mm, 200mm and 300mm measuring ranges.
MODELS AND SPECIFICATIONS
DITRON 607-150
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
DITRON 607-200
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
DITRON 607-300
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
IP67 PROTECTION FOR WORKSHOP ENVIRONMENTS
The manufacturer identifies the 607 series as IP67 and describes protection against water, oil, coolant and dust.
This makes environmental protection a key feature to assess when selecting a caliper for machining and workshop use. For applications involving specific coolants, oils or cleaning chemicals, confirm compatibility and permitted exposure with the supplier.
Follow the manufacturer’s operating and care instructions. Keep the measuring faces clean because contamination between the jaws and workpiece can affect measurement, even when the instrument housing is protected.
ABSOLUTE MEASUREMENT WITH INDUCTIVE SENSING
The catalogue describes an absolute measuring system in which each position along the scale has a unique code.
According to the manufacturer, the caliper can identify its current position after switching off and on, including when the slider has moved while the instrument was off. This reduces the need to re-establish the reference during routine operation.
A closed-jaw zero check remains a useful part of the measurement procedure. Absolute position measurement does not remove the need for cleanliness, inspection or periodic performance checks.
On this catalogue page, “ABS” refers to absolute measurement. The housing material is separately described as plastic.
CHOOSING THE MEASURING RANGE
Suitable for smaller components and routine dimensional checks within a 150mm measuring capacity.
Provides additional capacity for parts that exceed the opening of a 150mm caliper.
Provides the largest measuring capacity in this series for larger components. Check jaw reach, workpiece access and tolerance requirements before selecting.
Choose the range according to the largest dimension you need to measure. The catalogue-stated accuracy differs by range.
FOUR MEASUREMENT FUNCTIONS
Outside Measurement
Use the external jaws to check dimensions such as component thickness, width and outside diameter.
Inside Measurement
Use the internal jaws to check accessible internal dimensions. Keep the jaws correctly aligned with the feature.
Step Measurement
Use the step measuring faces to measure suitable stepped features.
Depth Measurement
Use the depth rod to check accessible hole or recess depths. Seat the reference face correctly against the workpiece.
APPLICATIONS IN MALAYSIA
The DITRON 607 series can be considered for:
• Machining workshop dimensional checks.
• Metal fabrication inspection.
• Incoming component inspection.
• Maintenance workshop measurements.
• Production and assembly checks.
• Work areas where dust or occasional liquid exposure is a selection concern.
For factories and workshops in Selangor, Kuala Lumpur, Johor and Penang, select the model according to measuring range, required accuracy, environmental conditions and inspection procedures.
For tight-tolerance components, assess whether a micrometer or another measuring instrument is more appropriate.
RESOLUTION AND ACCURACY
The display resolution is 0.01mm. This is the displayed increment, rather than a guarantee of ±0.01mm accuracy.
Catalogue-stated accuracy:
0–150mm model: ±0.02mm
0–200mm model: ±0.03mm
0–300mm model: ±0.04mm
Measurement results also depend on alignment, measuring force, temperature, cleanliness and instrument condition.
607 SERIES VS RECHARGEABLE DITRON MODELS
The 607 series emphasises IP67 protection and absolute inductive measurement.
The separately listed DITRON 701, 702, 902 and 705 catalogue pages emphasise rechargeable operation and display configurations. The 901 series additionally lists Bluetooth data transmission.
The supplied 607 catalogue page does not list Type-C charging, rechargeable operation or Bluetooth. Confirm these requirements separately rather than assuming they are shared across DITRON series.
CARE AND BASIC CHECKS
• Clean the measuring faces before use.
• Check the zero reading with the jaws gently closed.
• Apply light, consistent measuring force.
• Keep the instrument aligned with the dimension being measured.
• Remove chips and residue before closing the jaws.
• Avoid measuring hot or moving components.
• Clean and dry the instrument according to the manufacturer’s instructions.
• Check performance against suitable reference standards according to your quality procedure.
If readings become inconsistent, first check cleanliness, zero and measuring technique. Arrange further inspection if the issue continues.
FREQUENTLY ASKED QUESTIONS
What does ABS mean on the DITRON 607 catalogue?
It refers to the absolute measuring system. It is not a statement that the housing is made from ABS plastic.
Does the 607 series use inductive sensing?
Yes. The catalogue identifies the measuring technology as inductive.
Does it retain its measuring reference after switching off?
The manufacturer states that the absolute system identifies the current slider position after switching on, including when the slider was moved while switched off.
Is the DITRON 607 rated IP67?
The manufacturer’s catalogue lists IP67 protection. Request supporting documentation if your purchasing procedure requires it.
Can it be used around coolant?
The catalogue describes coolant protection. Confirm compatibility with your specific coolant and follow the permitted exposure and care instructions.
Is the 607 rechargeable?
Rechargeable operation and Type-C charging are not specified on the supplied page. Confirm the battery type and power arrangement before ordering.
Does it have Bluetooth?
Bluetooth is not listed on this catalogue page. Customers requiring wireless data transmission can enquire about the DITRON 901 series.
Can it measure depth?
Yes. Outside, inside, step and depth measurement are listed.
Does IP67 improve measurement accuracy?
The protection rating and measuring accuracy are separate specifications. Use the accuracy stated for the selected measuring range.
Is a calibration certificate included?
The catalogue displays a DIN 862 marking but does not confirm that an individual calibration certificate is supplied. Specify documentation requirements when requesting a quotation.
SEO META DESCRIPTION
Explore DITRON 607 IP67 absolute digital calipers in Malaysia. Available in 150mm, 200mm and 300mm ranges with inductive sensing and 0.01mm resolution.
ENQUIRE ABOUT DITRON 607 IP67 DIGITAL CALIPERS
Contact MTM Precision with your required measuring range, quantity and application. Please specify any coolant exposure, protection documentation or calibration certificate requirements so the configuration can be checked before ordering.
Availability, battery details, supplied accessories and documentation are subject to confirmation.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
24 Oct 2026
