DITRON 901 Series Rechargeable Bluetooth Digital Calipers | 150mm, 200mm & 300mm Malaysia
DITRON 901 Series — Rechargeable Bluetooth Digital Calipers
The DITRON 901 series combines a large digital display, Type-C charging and Bluetooth measurement data transmission. Available in 150mm, 200mm and 300mm measuring ranges, the series supports outside, inside, step and depth measurement.
For workshops and quality inspection teams in Malaysia, Bluetooth connectivity offers a way to transfer readings to compatible mobile phones or computers. Confirm the required software, operating system and connection accessories before ordering.
PRODUCT HIGHLIGHTS
• Bluetooth measurement data transmission.
• Connection to compatible mobile phones and computers.
• Rechargeable design with Type-C charging.
• Large digital display.
• Battery level indication.
• ABS display housing.
• 4Cr13 stainless steel ruler.
• Optical glass fixed grid, as described in the manufacturer’s catalogue.
• Outside, inside, step and depth measurement.
• Optional inch fraction display.
MODELS AND SPECIFICATIONS
DITRON 901-150
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
DITRON 901-200
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
DITRON 901-300
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
BLUETOOTH DATA TRANSMISSION
The manufacturer’s catalogue states that the 901 series can transmit measurement data through Bluetooth to mobile phones and computers.
This feature can support inspection workflows that require readings to be recorded electronically. Its usefulness depends on compatibility with the receiving device and software.
Before ordering, confirm:
• Supported mobile phone and computer operating systems.
• Required application or computer software.
• Whether a Bluetooth receiver or other accessory is needed.
• How readings are triggered and recorded.
• Available file formats and export functions.
• Whether any software licence or additional charge applies.
The supplied catalogue page does not confirm direct Excel entry, compatibility with specific inspection software, Bluetooth range or simultaneous connection to multiple devices.
TYPE-C RECHARGEABLE DESIGN
The 901 series uses a rechargeable power supply and a Type-C charging connection. A battery level indicator helps users monitor the remaining charge.
Battery capacity, operating duration, charging time and charger requirements are not specified on the supplied catalogue page. Follow the instructions supplied with the instrument.
LARGE DISPLAY AND STAINLESS STEEL RULER
The large display provides a clear digital reading for dimensional checks. The catalogue specifies an ABS display housing and a 4Cr13 stainless steel ruler.
The display colour shown in the product image should not be treated as confirmation of a backlight. Confirm illumination requirements separately when requesting a quotation.
FOUR MEASUREMENT FUNCTIONS
Outside Measurement
Use the external jaws to measure accessible external dimensions, including component width, thickness and outside diameter.
Inside Measurement
Use the internal jaws to measure accessible internal dimensions. Align the jaws carefully with the feature being measured.
Step Measurement
Use the step measuring faces to check suitable stepped features.
Depth Measurement
Use the depth rod to measure accessible hole or recess depths, keeping the reference face correctly seated.
CHOOSING THE RIGHT MEASURING RANGE
Suitable for smaller components and general dimensional checks within the 150mm capacity.
Provides additional capacity for workpieces that exceed a 150mm measuring range.
Provides the largest measuring range in this series for larger components. Check jaw reach and access around the workpiece before selecting.
Choose the range according to the dimensions you need to measure. A larger range does not provide higher stated accuracy.
RESOLUTION IS DIFFERENT FROM ACCURACY
All three models have a metric display resolution of 0.01mm. This describes the displayed increment, rather than a guaranteed ±0.01mm measurement accuracy.
The catalogue-stated accuracy is:
• 150mm model: ±0.02mm.
• 200mm model: ±0.03mm.
• 300mm model: ±0.04mm.
Workpiece temperature, cleanliness, jaw alignment, measuring force and instrument condition can also affect results.
APPLICATIONS IN MALAYSIA
The DITRON 901 series can be considered for:
• Incoming component inspection.
• Machining and fabrication dimensional checks.
• Maintenance workshop measurements.
• Inspection tasks requiring electronic recording of readings.
• Training in dimensional measurement.
For factories and workshops in Selangor, Kuala Lumpur, Johor and Penang, confirm that the selected model meets the workpiece tolerance and data recording requirements.
Bluetooth transmission transfers measurement information; it does not improve the caliper’s stated accuracy.
901 SERIES VS 701 AND 702 SERIES
The main additional feature of the 901 series is Bluetooth data transmission.
The previously supplied 701 and 702 catalogue page lists rechargeable operation, large displays and the same accuracy at corresponding measuring ranges. The 701 uses an ABS display housing, while the 702 uses a zinc alloy display housing with an optional backlight.
Choose the 901 series when compatible wireless data transfer is a requirement. For measurement tasks that only require readings on the instrument, compare the housing, display configuration and quotation across the available series.
CARE AND BASIC CHECKS
• Clean the measuring faces and workpiece before measurement.
• Check the zero reading with the jaws gently closed.
• Use light, consistent measuring force.
• Keep the caliper correctly aligned with the workpiece.
• Avoid measuring hot or moving components.
• Check the instrument against suitable reference standards according to your quality procedure.
• Verify that transmitted readings match the instrument display during initial setup.
• Follow the supplied charging and storage instructions.
The supplied catalogue page does not specify an IP protection rating. Confirm environmental suitability before use around coolant, water or heavy contamination.
FREQUENTLY ASKED QUESTIONS
Can the DITRON 901 connect to a mobile phone?
The catalogue states that Bluetooth connection to mobile phones is supported. Confirm the compatible operating system and required application before purchase.
Can it connect to a computer?
The catalogue states that connection to a PC is supported. Confirm the required software and whether a receiver is needed.
Can readings be sent directly into Excel?
The supplied catalogue page does not confirm this function. Request confirmation of the supported data entry and export methods.
Is the 901 series rechargeable?
Yes. The catalogue lists rechargeable operation with Type-C charging.
Does it show the battery level?
Yes. Battery level indication is shown among the catalogue features.
Does it have a backlight?
The supplied page does not explicitly list a backlight. Confirm this separately if required.
Can it measure depth?
Yes. Outside, inside, step and depth measurement are listed.
Is inch fraction display standard?
The catalogue lists inch fraction display as optional. Specify this requirement when ordering.
Does Bluetooth make the measurement more accurate?
No. Measurement accuracy remains the stated specification for the selected model. Bluetooth provides a method of transferring readings.
Is a calibration certificate included?
The catalogue displays a DIN 862 marking, but does not confirm that an individual calibration certificate is included. Specify any documentation requirements when requesting a quotation.
SEO META DESCRIPTION
Explore DITRON 901 Bluetooth digital calipers in Malaysia. Compare 150mm, 200mm and 300mm models with Type-C charging and wireless data transfer.
ENQUIRE ABOUT DITRON 901 BLUETOOTH DIGITAL CALIPERS
Contact MTM Precision with your preferred measuring range, quantity and intended receiving device. Please specify your software, data recording and calibration documentation requirements so the configuration can be checked before ordering.
Availability, software compatibility, supplied accessories and optional features are subject to confirmation.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
24 Oct 2026
