DITRON Rechargeable Digital Calipers – 701 & 702 Series | 150mm, 200mm & 300mm Malaysia
DITRON 701 and 702 Series Rechargeable Digital Calipers
The DITRON 701 and 702 series combine a large digital display, Type-C charging and stainless steel measuring components for dimensional measurement. Both series are available in 150mm, 200mm and 300mm measuring ranges.
For workshops, machining departments and inspection teams in Malaysia, the main selection differences are the display housing, optional backlight and measuring range. Both series have the same catalogue-stated accuracy at each corresponding range.
PRODUCT HIGHLIGHTS
• Rechargeable design with Type-C charging.
• Large digital display.
• 4Cr13 stainless steel ruler.
• Optical glass fixed grid, as described in the manufacturer’s catalogue.
• Outside, inside, step and depth measurement.
• Automatic power-on and automatic power-off.
• Optional inch fraction display.
• Choice of 150mm, 200mm and 300mm measuring ranges.
701 SERIES — LARGE-SCREEN RECHARGEABLE DIGITAL CALIPERS
The DITRON 701 series features an ABS display housing and a 4Cr13 stainless steel ruler.
It is an option for users who want a rechargeable digital caliper with a large display for routine dimensional checks. The catalogue shows silver and black display housing options; confirm the required colour when ordering.
The 701 series catalogue specifies automatic power-off after five minutes of inactivity.
Available models:
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
702 SERIES — METAL-HOUSING RECHARGEABLE DIGITAL CALIPERS
The DITRON 702 series features a zinc alloy display housing and a 4Cr13 stainless steel ruler.
A backlight is listed as optional. Customers who require an illuminated display should specify this configuration before ordering.
The 702 series provides an alternative housing construction while retaining the same catalogue-stated resolution and accuracy as the corresponding 701 models. Choosing the 702 series does not provide a higher stated measurement accuracy.
Available models:
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
701 VS 702 — WHICH SERIES SHOULD YOU CHOOSE?
Choose the 701 series if you prefer:
• An ABS display housing.
• A large-screen rechargeable caliper for routine measurement.
• Silver or black housing options, subject to confirmation.
Choose the 702 series if you prefer:
• A zinc alloy display housing.
• An optional backlit display.
• The same stated measuring performance with a different housing construction.
For either series, select the measuring range according to your largest workpiece and confirm the required display options.
CHOOSING THE MEASURING RANGE
150mm Models
A practical starting point for measuring smaller components, fasteners and general workshop parts within the measuring range.
200mm Models
Suitable when workpieces exceed the capacity of a 150mm caliper but remain within 200mm.
300mm Models
Suitable for larger components requiring up to 300mm measuring capacity. Check access around the workpiece and jaw reach as well as the maximum opening.
A longer measuring range does not mean higher accuracy. The catalogue specifies ±0.02mm for 150mm models, ±0.03mm for 200mm models and ±0.04mm for 300mm models.
FOUR MEASUREMENT FUNCTIONS
Outside Measurement
Use the external jaws to check external dimensions such as component width, thickness and outside diameter.
Inside Measurement
Use the internal jaws to check accessible internal dimensions. Correct jaw alignment is important for consistent readings.
Step Measurement
Use the step measuring faces to check suitable stepped features.
Depth Measurement
Use the depth rod to check accessible hole or recess depths. Keep the reference face seated correctly against the workpiece.
PRACTICAL APPLICATIONS IN MALAYSIA
These calipers can be considered for dimensional checks in machining workshops, fabrication departments, maintenance teams and incoming inspection areas in Selangor, Kuala Lumpur, Johor and Penang.
Suitability depends on the workpiece, required tolerance, measuring access and inspection procedure. For tight tolerances, assess whether a micrometer or another measuring instrument is more appropriate.
RESOLUTION AND ACCURACY
The 0.01mm resolution is the smallest displayed metric increment. It does not mean the caliper has ±0.01mm accuracy.
Use the accuracy specified for the selected model when assessing whether it meets your measurement requirements. Measurement technique, cleanliness, temperature and instrument condition also affect results.
CARE AND MEASUREMENT CHECKS
• Clean the measuring faces and workpiece before use.
• Close the jaws gently and check the zero reading.
• Keep the jaws aligned with the dimension being measured.
• Apply light, consistent measuring force.
• Avoid measuring hot or moving workpieces.
• Check performance against suitable reference standards according to your quality procedure.
• Follow the supplied charging instructions.
The supplied catalogue page does not specify an IP protection rating, charging time or battery runtime. Confirm these details before selecting the caliper for wet environments or applications requiring a defined operating duration.
FREQUENTLY ASKED QUESTIONS
Are both series rechargeable?
Yes. The manufacturer’s catalogue lists rechargeable operation and Type-C charging for both the 701 and 702 series.
What is the main difference between 701 and 702?
The 701 series uses an ABS display housing. The 702 series uses a zinc alloy display housing and offers an optional backlight.
Does every 702 caliper include a backlight?
The catalogue lists the backlight as optional. Confirm the supplied configuration before ordering.
Is the 702 series more accurate?
The catalogue gives the same accuracy for corresponding 701 and 702 measuring ranges.
Can these calipers measure depth?
Yes. The catalogue lists outside, inside, step and depth measurement.
Is inch fraction display included?
It is listed as optional. Specify this requirement when requesting a quotation.
Are these waterproof calipers?
The supplied catalogue page does not state an IP rating. Waterproof performance should not be assumed.
Does the DIN 862 marking mean a calibration certificate is included?
No. The catalogue displays a DIN 862 marking, but this does not establish that an individual calibration certificate is supplied. Confirm documentation requirements separately.
SEO META DESCRIPTION
Explore DITRON 701 and 702 rechargeable digital calipers in Malaysia. Compare 150mm, 200mm and 300mm models, Type-C charging and housing options.
ENQUIRE ABOUT DITRON DIGITAL CALIPERS
Contact MTM Precision with your preferred model, measuring range and quantity. Please specify whether you require a backlight, inch fraction display or calibration documentation. Configuration, availability and supplied accessories are subject to confirmation.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
24 Oct 2026
