Professional Fuzrr ES3080 Three-Channel DC Resistance Tester in Malaysia

For three-phase power transformer winding resistance testing, industrial frequency ground resistance evaluation, fast three-phase imbalance rate calculation, and high-precision DC resistance diagnostics in substations and heavy industrial plants, a dedicated multi-channel high-current test system is essential. MTM Precision Sdn. Bhd. is proud to present the official Fuzrr ES3080 Three-Channel DC Resistance Tester in Malaysia.

The Fuzrr ES3080 (also referred to as an industrial frequency ground resistor tester or three-channel DC resistance meter) is an advanced microprocessor-controlled testing system housed in a heavy-duty IP54 protective briefcase enclosure. Featuring dual-frequency inverter power technology and four-wire Kelvin testing capability, it delivers an ultra-wide resistance range from 0.0001 mΩ to 5000 Ω with a minimum resolution of 0.001 mΩ and basic accuracy of +/-0.2% FS +/- 5dgt. Designed with a 7-inch high-definition touch color display, built-in thermal printer, automatic three-phase winding imbalance rate calculation, winding material temperature conversion, USB/U-disk interfaces, and short-circuit output currents up to 20A, the ES3080 dramatically speeds up transformer commissioning and maintenance workflows.

Below is an extensive technical breakdown of the product introduction, key features, applications, and detailed specifications for the ES3080 model, presented cleanly in plain text without tables, citations, or encoding errors.

Product Applications

Three-phase power transformer DC winding resistance testing with automatic three-phase imbalance rate calculation
Simultaneous or sequential multi-channel winding resistance testing for large star-connected and delta-connected transformers
Industrial frequency ground resistance testing and earth impedance verification across substations, power distribution lines, iron tower lines, and factory grounding networks
Contact resistance measurement of high-voltage circuit breakers, disconnectors, switches, busbars, and tap changers
Ground down lead conduction testing, lightning rod grounding diagnostics, and magnetic testing for low-pressure/low-voltage resistance evaluation

Key Features & Operational Advantages

Three-Channel Direct Testing & Automatic Imbalance Calculation: Enables rapid testing of transformer windings while automatically calculating and displaying the three-phase winding resistance imbalance rate.
Ultra-Wide Resistance Range & Fine Resolution: Covers a DC resistance measurement range from 0.0001 mΩ to 5000 Ω with a minimum resolution of 0.001 mΩ and an output current display from 0.01 mA to 20.000 A.
Built-in Thermal Printer: Features an integrated thermal printer (using standard 57mm x 40mm paper rolls) for immediate, on-site test record printing.
7-Inch High-Definition Touch Screen Display: Large 7-inch full-color touch LCD screen with adjustable backlight brightness, real-time testing progress display, and animated operational prompts.
Winding Material Temperature Conversion: Converts measured resistance values to standardized results according to the measurement temperature and specific winding material properties.
Comprehensive Data Export & Memory: Stores up to 500 sets of data in internal memory, supporting data export via U-disk drive or direct USB connection to upper-machine PC software.
Built-in Safety & Demagnetization: Includes automatic self-discharge circuitry, overload protection,maximum open-circuit voltage cap (DC 27V +/- 10%), and low-voltage output magnetic testing capabilities.

Technical Specifications — Fuzrr ES3080 Three-Channel Model

Core Measurement Parameters

Primary Functions: DC resistance measurement, transformer three-phase DC resistance measurement,ground resistance testing, three-phase imbalance rate calculation
DC Resistance Range: 0.0001 mΩ to 5000 Ω
Accuracy: +/-0.2% FS +/- 5dgt
Minimum Resolution: 0.001 mΩ
Output Current Display Range: 0.01 mA to 20.000 A
Selectable Short-Circuit Test Current Gears: 0.2A, 0.5A, 2A, 5A, 10A, 20A (set settings)
Maximum Short-Circuit Current: DC 20A +/- 10%
Maximum Open-Circuit Voltage: DC 27V +/- 10%
Rated Measurement Power: 1000W
Measurement Method: Four-line test method (Kelvin 4-wire)
Magnetic Test Function: High and low-voltage output current, tests low-pressure resistance

Functional Features & Data Management

Three-Phase Imbalance Rate: Automatically displays three-phase winding imbalance rate
Separate Distribution Position: Manual distribution position setup available in the settings interface
Overload Protection: Supported
Automatic Discharge: Supported, with safety discharge handling
Display Screen: 7-inch touch full-color screen with adjustable backlight brightness
Touch Screen Operation: Yes, responsive touch interface
Measuring Instructions: Setting progress display, measurement prompt animation display
Built-in Printer: Built-in thermal printer (Printed paper specification: 57mm x 40mm)
Data Storage Capacity: 500 groups
Data Transfer & Connectivity: U-disk special interface for flash drive connection, USB cable interface for PC software monitoring and reporting

Hardware, Physical & Environmental Parameters

Power Supply: AC 220V 10A (50Hz)
Instrument Dimensions: Length 450mm x Width 350mm x Height 180mm
Standard Test Lines: 8 pieces included
Ingress Protection Rating: IP54 (IEC60529)
Production Compliance & Safety Regulations: IEC61010-1, IEC1010-2-31, IEC61557-1,5, IEC60529 (IP54), Pollution Degree 2, CAT III 300V

Why Choose MTM Precision in Malaysia?

At MTM Precision Sdn. Bhd., we supply genuine Fuzrr three-channel DC resistance testers, transformer diagnostic systems, and electrical testing instruments across Malaysia, backed by local warranty coverage,technical support, calibration services, and reliable after-sales assistance.

Contact MTM Precision

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

Website:

www.mtmpre.com

.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-660 7346

Office Tel: +603-80807172