Langry APT200 200kN Anchor Pull-Out Tester for Anchor Bolt Testing Malaysia
Langry APT200 200kN Anchor Pull-Out Tester for Anchor Bolt Testing Malaysia
Langry APT200 Anchor Pull-Out Tester Malaysia
The Langry APT200 Anchor Pull-Out Tester is a professional 200kN / 20-ton anchor pull-out testing system designed for evaluating the anchorage strength of anchor rods, steel bars, expansion bolts and other anchoring components used in construction and structural engineering applications.
With a maximum measuring range of 200kN, the APT200 provides contractors, engineers, testing laboratories, inspection companies and QA/QC teams in Malaysia with a practical solution for performing on-site anchor pull-out tests.
The instrument combines a hydraulic loading system with digital force measurement, allowing users to apply controlled tensile loads and monitor the pull-out force during testing.
For projects requiring verification of installed anchors and anchoring systems, the Langry APT200 provides a powerful solution for construction quality control and engineering inspection.
What Is an Anchor Pull-Out Test?
An anchor pull-out test is performed to evaluate the resistance of an installed anchor or anchoring component when subjected to tensile loading.
During testing, a controlled pulling force is applied to the anchor using a hydraulic pull-out tester.
The measured force helps engineers assess the performance of the anchor installation and determine whether the anchoring system meets the required project or engineering criteria.
Pull-out testing may be required for applications involving:
Anchor bolts
Expansion anchors
Anchor rods
Steel bars
Installed anchoring components
Structural fixing systems
Curtain wall anchoring
Construction quality verification
Langry APT200 – 200kN / 20 Ton Testing Capacity
The Langry APT200 provides a maximum measurement range of:
0–200kN
This corresponds to approximately:
20 Ton testing capacity
The 200kN capacity makes the APT200 suitable for many medium-to-heavy-duty anchor testing applications commonly encountered in construction and civil engineering projects.
For contractors and testing companies handling different anchor sizes and fixing systems, this capacity provides useful flexibility for on-site testing.
Key Features of Langry APT200
1. 200kN Maximum Measuring Range
The APT200 provides a measurement range of 0–200kN, making it suitable for demanding anchor pull-out testing applications.
2. 70mm Cylinder Stroke
The hydraulic cylinder provides a 70mm stroke, allowing controlled loading during pull-out testing.
3. 35mm Center Hole
The APT200 cylinder features a 35mm centre hole, providing compatibility with the appropriate pull rods, adapters and anchor testing accessories.
4. Digital Force Measurement
The electronic measuring system allows the operator to monitor the applied pulling force digitally during testing.
5. Data Storage
The APT series can store up to 500 measurement records, helping users maintain test information for project documentation and subsequent review.
6. Long Operating Time
The measuring system provides more than 200 hours of continuous operating time, supporting extended field use.
7. Portable for Site Testing
The system is designed for field applications, making it suitable for contractors, inspection teams and testing personnel working directly at construction sites.
Langry APT200 Technical Specifications
SpecificationAPT200Measurement Range0–200kNApproximate Capacity20 TonCylinder Center Hole35mmCylinder Stroke70mmCylinder WeightApprox. 13kgCommon AnchorageΦ6–Φ25Pull RodM24ConverterM6–M22Data Storage500 RecordsContinuous Working Time>200 HoursAccuracy ClassificationEN ISO 7500-1 Class 1
Applications of Langry APT200 in Malaysia
Anchor Bolt Pull-Out Testing
The APT200 can be used to evaluate the tensile resistance of installed anchor bolts used for construction and structural fixing applications.
This is particularly useful where engineers need to verify the quality and performance of installed anchoring systems.
Expansion Bolt Testing
Expansion anchors depend heavily on correct drilling, installation, embedment and substrate condition.
Pull-out testing provides an effective method for checking the actual installed performance of selected anchors.
Steel Bar and Anchor Rod Testing
The Langry APT200 can also be used for testing suitable steel bars and anchor rods where tensile pull testing is required.
Curtain Wall Anchor Testing
Anchor performance is particularly important for façade and curtain wall installations.
The APT200 can be used for on-site pull-out testing associated with glass curtain wall anchoring applications, subject to the applicable project test method and engineering requirements.
Construction QA/QC Testing
For contractors and project QA/QC teams, pull-out testing can form part of the inspection process used to verify workmanship and anchor installation quality.
Test results can help identify potential problems before subsequent construction work continues.
Who Should Use the Langry APT200?
The Langry APT200 is suitable for:
Civil engineering contractors
Building contractors
Structural contractors
Anchor installation contractors
Façade contractors
Curtain wall contractors
Engineering consultants
Inspection companies
Material testing laboratories
QA/QC departments
Government and infrastructure projects
Universities and research institutions
Why Is Anchor Pull-Out Testing Important?
The performance of an anchor depends on more than the specification printed on the anchor itself.
Actual installation conditions may affect its performance.
Factors can include:
Concrete condition
Drilling quality
Hole diameter
Hole cleaning
Embedment depth
Anchor installation method
Expansion setting
Adhesive installation quality
Curing conditions
Workmanship
For this reason, site pull-out testing can provide valuable information about the actual installed anchorage performance under the specified test conditions.
Why Choose a 200kN Anchor Pull-Out Tester?
Different applications require different testing capacities.
A small-capacity tester may be sufficient for lighter anchoring systems, while larger anchors and higher test loads require equipment with greater capacity.
With a maximum range of 200kN / approximately 20 tons, the Langry APT200 offers a useful middle-capacity option for contractors and testing companies that require more capability than a 100kN system without immediately moving to a larger 300kN tester.
Langry also offers other capacities in the APT series, allowing users to select a tester according to the required load range and application.
Langry APT100 vs APT200 vs APT300
The Langry APT series is available in different capacities for different anchor testing requirements.
ModelMaximum RangeApproximate CapacityAPT100100kN10 TonAPT200200kN20 TonAPT300300kN30 Ton
For many general construction and anchor testing applications, the APT200 provides a practical balance between testing capacity and portability.
The correct model should always be selected according to the expected test load, anchor configuration and project requirements.
Looking for an Anchor Pull-Out Tester in Malaysia?
MTM Precision supplies testing and measurement equipment for construction, civil engineering, inspection and industrial applications in Malaysia.
If you are unsure whether you require the Langry APT100, APT200 or APT300, contact our team with information such as:
Anchor type
Anchor diameter
Required test load
Application
Project testing requirement
We can help you identify a suitable configuration for your application.
Why Choose MTM Precision?
MTM Precision Sdn. Bhd. supplies professional testing and measurement instruments for customers throughout Malaysia.
Our product range covers construction testing, concrete inspection, surveying, industrial measurement and non-destructive testing equipment.
Customers can contact us not only for product supply but also for assistance in selecting suitable testing equipment for their applications.
Frequently Asked Questions
What is the maximum capacity of the Langry APT200?
The Langry APT200 has a maximum measuring range of 200kN, approximately equivalent to a 20-ton testing capacity.
What is the Langry APT200 used for?
It is used for pull-out testing of suitable anchors, anchor rods, steel bars, expansion bolts and related anchoring systems.
Can the APT200 be used at construction sites?
Yes. The system is designed for field testing and can be used for on-site anchor pull-out testing.
Can it be used for curtain wall anchor testing?
The APT series is intended for anchor pull-out testing applications including glass curtain wall anchoring. The actual test configuration should follow the applicable project specification and engineering requirements.
Does the APT200 store test data?
Yes. The instrument supports storage of up to 500 measurement records.
Is 200kN the same as 20 tons?
200kN corresponds to approximately 20.4 metric tonnes-force, so the APT200 is commonly referred to as a 20-ton class anchor pull-out tester.
Where can I buy the Langry APT200 in Malaysia?
Contact MTM Precision Sdn. Bhd. for Langry anchor pull-out testing equipment and assistance with model selection in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Langry APT200 200kN Anchor Pull-Out Tester Malaysia – Contact MTM Precision for product information, quotation and technical assistance.
11 Aug 2026