Where to Buy Anchor Pull-Out Tester in Malaysia? Langry APT200 Supplier Malaysia

Where to Buy Anchor Pull-Out Tester in Malaysia? Langry APT200 Supplier Malaysia Anchor Pull-Out Tester Supplier Malaysia If you are looking for an anchor pull-out tester in Malaysia for construction, civil engineering, faade, anchor installation or QA/QC applications, MTM Precision supplies professional construction testing and measurement equipment including the Langry APT series Anchor Pull-Out Testers. Available capacities include: Langry APT100 100kN / 10 Ton Class Langry APT200 200kN / 20 Ton Class Langry APT300 300kN / 30 Ton Class Among these models, the Langry APT200 provides a practical middle-capacity solution for customers requiring up to 200kN measurement range. Before purchasing, customers should identify the required test load, anchor type and test application so that the appropriate tester and accessories can be selected. Where Can I Buy a Langry APT200 in Malaysia? Customers looking for a Langry APT200 Anchor Pull-Out Tester in Malaysia can contact: MTM Precision Sdn. Bhd. Our showroom and service centre is located in Puchong, Selangor, serving customers involved in construction, civil engineering, surveying, inspection and industrial testing applications. Customers can contact MTM Precision for: Product enquiries Current quotation Model selection Capacity selection Application discussion Accessory requirements For the most accurate recommendation, provide your anchor type, diameter and required test load. What Is the Langry APT200? The Langry APT200 is a portable hydraulic pull-out testing system designed for suitable anchorage testing applications. Its maximum measurement range is: 0200kN This corresponds to approximately: 20-ton class capacity It sits between the Langry APT100 100kN model and the higher-capacity APT300 300kN model. Langry APT200 Technical Specifications SpecificationLangry APT200Measurement Range0200kNApproximate Capacity20 TonCylinder Centre Hole35mmCylinder Stroke70mmCylinder WeightApprox. 13kgCommon AnchorageΦ6Φ25Pull RodM24ConverterM6M22Data Storage500 RecordsContinuous Working Time>200 HoursAccuracy ClassificationEN ISO 7500-1 Class 1 What Can the Langry APT200 Test? Depending on the required load, adapter and test arrangement, typical applications can include suitable: Anchor bolts Chemical anchors Mechanical anchors Expansion bolts Anchor rods Threaded rods Steel bars Post-installed anchoring components Faade anchors Curtain wall anchors The exact configuration should be confirmed before testing. Langry APT200 for Chemical Anchor Testing Chemical anchors are widely used in construction where threaded rods or steel bars need to be post-installed into concrete. Their performance can depend on: Hole diameter Hole depth Hole cleaning Adhesive installation Embedment Curing time Concrete condition Workmanship Where required by the project, pull-out testing can be used to verify selected installed anchors under a specified tensile test load. Langry APT200 for Expansion Bolt Testing Expansion and mechanical anchors rely on correct installation and interaction with the base material. Performance may be affected by: Drilling Embedment Expansion setting Installation torque Concrete condition Edge distance Workmanship The APT200 can provide controlled tensile loading for suitable mechanical anchor test arrangements. Langry APT200 for Faade and Curtain Wall Contractors Faade systems may use post-installed anchors to connect brackets and supporting components to the building structure. Pull-out testing may therefore form part of project QA/QC. Potential applications include: Glass curtain wall anchors Faade brackets Aluminium faade supports Cladding supports Chemical anchors Mechanical anchors For faade contractors handling different anchor sizes, the 200kN range can provide useful flexibility. Langry APT200 for Construction Contractors Main contractors and specialist subcontractors may require anchor verification for: Structural steel works M&E supports Handrails Barriers Machinery foundations Retrofit construction Building extensions Structural strengthening A portable pull-out tester allows appropriate tests to be performed directly at the construction site. Langry APT200 for Testing Laboratories Testing laboratories and inspection companies often work across multiple projects. Their applications may change from one customer to another. A wider-capacity tester can therefore provide useful flexibility. The APT200 may be considered where: 100kN is sometimes insufficient Required loads remain within 200kN Field portability remains important Different anchor types are tested Why Buy from a Local Supplier in Malaysia? Purchasing professional testing equipment involves more than obtaining the lowest online price. A local supplier can help customers clarify: Which capacity is required Which model is appropriate What anchor information is needed What accessories may be required Whether the application fits the equipment range This can reduce the risk of purchasing the wrong capacity or configuration. br> Do You Need 100kN, 200kN or 300kN? Before requesting a quotation, determine the maximum anticipated test load. Up to 100kN Consider the Langry APT100 where the required testing range remains within 100kN. Up to 200kN Consider the Langry APT200 where more than 100kN may be required but the maximum load remains within 200kN. Up to 300kN Consider the Langry APT300 where the testing requirement can exceed 200kN. The final selection should also consider the anchor connection and test setup. Why APT200 Is a Popular Capacity to Consider The APT200 sits in the middle of the range. For companies working across different construction projects, 100kN may sometimes be restrictive, while 300kN may provide more capacity than is normally required. The 200kN / 20-ton class therefore provides a useful balance for many professional users. Do Not Buy Based on Ton Rating Alone A customer may search online for: 10 Ton Anchor Pull-Out Tester 20 Ton Anchor Pull-Out Tester or 30 Ton Anchor Pull-Out Tester But capacity is only one selection factor. Also check: Anchor type Anchor diameter Thread size Required proof load Maximum load Exposed anchor length Site accessibility Reaction setup Adapter requirements A tester with sufficient capacity can still be unsuitable if the test connection cannot be made correctly. What Information Should I Provide Before Buying? To obtain a more accurate recommendation and quotation, provide: Anchor Type Chemical anchor, expansion bolt, mechanical anchor, steel bar or another anchoring component. Anchor Diameter For example M10, M12, M16 or M20. Required Test Load For example 50kN, 100kN or 150kN. Maximum Expected Load This helps determine the required tester capacity. Application For example: Curtain wall Construction QA/QC Structural steel M&E Testing laboratory Infrastructure Site Conditions Mention unusual access, elevated testing or restricted space where relevant. How to Request a Langry APT200 Quotation For faster model selection, your enquiry can be as simple as: Product: Langry APT200 Anchor Pull-Out Tester Anchor Type: Chemical Anchor Anchor Size: M16 Required Test Load: 120kN Application: Construction Site QA/QC Location: Malaysia This gives the supplier much more useful information than simply asking: “How much is a pull-out tester?” Anchor Pull-Out Tester Price Malaysia The price depends on factors including: Model Capacity Configuration Accessories Current supply conditions Delivery requirements For this reason, customers should request a current quotation. MTM Precision can quote the appropriate Langry model after reviewing the application. Questions to Ask an Anchor Pull-Out Tester Supplier Before purchasing, ask: What is the maximum measurement range? Is this capacity sufficient for my required test load? What adapters are included? What anchor sizes can be connected? What is the cylinder stroke? What is the cylinder centre hole? Can measurement records be stored? What information is required for model selection? What calibration documentation is available or required? Is the configuration suitable for my actual application? These questions can prevent purchasing mistakes. Frequently Asked Questions Where can I buy an anchor pull-out tester in Malaysia? Contact MTM Precision Sdn. Bhd. in Puchong, Selangor for Langry anchor pull-out testing equipment and product enquiries. Where can I buy the Langry APT200 in Malaysia? MTM Precision supplies Langry construction testing equipment including the APT series for customers in Malaysia. What is the APT200 capacity? The Langry APT200 provides a maximum measurement range of 200kN, approximately a 20-ton class capacity. Can I get a quotation for APT200? Yes. Provide MTM Precision with your anchor type, anchor size, required test load and application for quotation and configuration review. Should I buy APT100 or APT200? If all required loads remain below 100kN, APT100 may be sufficient. If your requirements can exceed 100kN but remain within 200kN, APT200 should be considered. When do I need APT300? APT300 should be considered where required loads can exceed the APT200's 200kN range. Can the APT200 test chemical anchors? Yes, for suitable chemical anchor pull-out testing configurations where the load and test arrangement are compatible. Can it test expansion bolts? Yes, suitable expansion bolts and mechanical anchoring components can be tested with the appropriate setup. Can it be used for faade anchors? Yes. Anchor pull-out testing is applicable to suitable faade and curtain wall anchoring applications where specified by the project. Langry Anchor Pull-Out Tester Supplier in Selangor Malaysia MTM Precision's showroom and service centre is located in Puchong, Selangor. Customers from Kuala Lumpur, Selangor and throughout Malaysia can contact our team for professional testing and measurement equipment. Our construction testing range supports applications in: Concrete testing Anchor testing Civil engineering Building inspection Construction QA/QC Surveying Industrial measurement Request a Quotation If you are searching for: Where to Buy Anchor Pull-Out Tester Malaysia Anchor Pull-Out Tester Supplier Malaysia Langry APT200 Supplier Malaysia 200kN Pull-Out Tester Supplier Malaysia 20 Ton Anchor Tester Malaysia Chemical Anchor Tester Supplier Malaysia Anchor Bolt Pull-Out Tester Malaysia contact MTM Precision with your application details. Contact MTM Precision MTM Precision Sdn. Bhd. Showroom & Service Centre No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia 🌐 Website: www.mtmpre.com.my 📧 Email: mtmpre@yahoo.com 📱 WhatsApp: +6016-660 7346 For Langry APT100, APT200 and APT300 Anchor Pull-Out Tester Malaysia, current quotation, model selection and technical product enquiries, contact MTM Precision.

11 Aug 2026