How to Check Multiple UV LED Curing Lamps with Linshang LS137 Malaysia

How to Check Multiple UV LED Curing Lamps with Linshang LS137 Malaysia

 

Many industrial UV LED curing machines do not rely on a single UV source.

 

A production line may use:

 

UV Module 1 → UV Module 2 → UV Module 3

 

or several UV LED curing zones positioned at different stages of the manufacturing process.

 

This arrangement can provide high production speed and controlled curing performance. However, it also creates an important maintenance question:

 

What happens if one UV LED module becomes weaker than the others?

 

The machine may continue operating normally, and all UV modules may still appear to be ON.

 

Yet the total UV exposure delivered to the product can change.

 

The Linshang LS137 UV Energy Meter can help production and maintenance teams measure UV irradiance and accumulated UV energy, making it easier to compare different UV LED curing zones and monitor their performance over time.

 

Why Do Industrial Machines Use Multiple UV LED Modules?

 

Multiple UV LED sources may be used to:

 

Increase total UV exposure

 

Increase production speed

 

Cure larger surfaces

 

Provide multiple curing stages

 

Improve process control

 

Support high-speed printing

 

Cure complex products

 

Provide different exposure zones

 

These configurations are common in applications such as:

 

UV printing

 

Packaging

 

Label printing

 

UV coating

 

Electronics manufacturing

 

Adhesive curing

 

Automated manufacturing

 

The exact configuration depends on the machine design.

 

The Problem: One Module Can Change Without Complete Machine Failure

 

Imagine a production line with three UV LED modules.

 

Originally:

 

Module A → Normal

 

Module B → Normal

 

Module C → Normal

 

After extended operation:

 

Module A → Normal

 

Module B → Reduced Output

 

Module C → Normal

 

The machine may still run.

 

All three modules may still illuminate.

 

But the total UV curing condition may no longer be identical to the original validated process.

 

This can lead to difficult-to-diagnose quality problems.

 

Why Visual Inspection Is Not Enough

 

An operator may look at all three UV modules and report:

 

“All UV lamps are working.”

 

That confirms only that the sources appear to be operating.

 

It does not tell you whether:

 

Module A and Module B have equal output

 

One module has deteriorated

 

One optical window is contaminated

 

Total UV energy has changed

 

One curing zone is operating differently

 

For this, quantitative UV measurement is more useful.

 

What Can Linshang LS137 Measure?

 

The Linshang LS137 can measure:

 

UV Energy

 

UV Irradiance

 

Peak UV Irradiance

 

Measurement Duration

 

Temperature

 

Maximum Temperature

 

These parameters can help engineers compare different UV curing zones.

 

Designed for UV LED Curing

 

The LS137 is designed for UV LED sources.

 

Its spectral response is approximately:

 

340–420 nm

 

and it is calibrated using a:

 

395 nm UV LED source

 

Common industrial UV LED wavelengths can include:

 

365 nm

 

385 nm

 

395 nm

 

405 nm

 

Always confirm the actual wavelength of the equipment before selecting a UV measurement instrument.

 

How to Compare Multiple UV LED Modules

 

Where the equipment configuration and operating procedure allow individual module testing, a structured comparison can be performed.

 

For example:

 

UV Module A

 

Record:

 

Power setting

 

Peak UV irradiance

 

UV energy

 

Measurement position

 

UV Module B

 

Repeat under comparable conditions.

 

UV Module C

 

Repeat again.

 

The results can then be compared.

 

The measurement procedure should be kept as consistent as practical.

 

Example of a Three-Module System

 

Suppose a production line originally records comparable performance across three UV modules.

 

Six months later, another inspection is performed.

 

The results show:

 

Module A → Similar to baseline

 

Module B → Significantly lower

 

Module C → Similar to baseline

 

This does not automatically prove that Module B must be replaced.

 

But it tells the maintenance team exactly where to investigate first.

 

What Should Be Checked If One Module Reads Lower?

 

Possible causes include:

 

UV LED degradation

 

Optical contamination

 

Different power setting

 

Cooling problem

 

Electrical issue

 

Driver problem

 

Different measurement geometry

 

The maintenance team can investigate the affected zone rather than treating the entire curing system as one unit.

 

Check Optical Cleanliness

 

Suppose Module B measures lower than Modules A and C.

 

Before replacing it, check the relevant optical components according to the equipment manufacturer's maintenance procedure.

 

If contamination is present:

 

Measure → Clean → Measure Again

 

If output returns closer to its historical baseline, the problem may have been contamination rather than UV LED deterioration.

 

Check the Power Setting

 

Some machines allow individual UV modules to operate at different power levels.

 

For example:

 

Module A = 80%

 

Module B = 60%

 

Module C = 80%

 

A lower measurement from Module B may therefore be completely expected.

 

Always record machine settings when comparing modules.

 

Check Cooling Performance

 

Individual UV LED modules may have separate:

 

Fans

 

Cooling channels

 

Heat sinks

 

Thermal controls

 

A cooling issue affecting one module may not affect the others.

 

If one curing zone behaves differently, its cooling system should also be investigated.

 

Compare Modules Under Similar Geometry

 

Distance matters.

 

If Module A is measured at one distance and Module B at another, the readings may not be directly comparable.

 

For meaningful comparison, keep relevant conditions as consistent as practical, including:

 

Working distance

 

Measurement orientation

 

UV power

 

Measurement position

 

This helps distinguish actual lamp differences from setup differences.

 

Measure the Complete Curing Path

 

Individual-module comparison is useful for troubleshooting.

 

However, the finished product may pass through all modules.

 

Therefore, manufacturers should also consider the total accumulated UV exposure through the actual curing process.

 

For example:

 

Module A + Module B + Module C = Total Curing Process

 

The final product-quality requirement depends on the complete process, not merely one module in isolation.

 

Conveyor Speed Still Matters

 

Suppose all three UV LED modules are operating normally.

 

Production increases conveyor speed.

 

The product now passes through:

 

Module A → Module B → Module C

 

more quickly.

 

Even though each module remains healthy, total exposure time can decrease.

 

Therefore, accumulated UV energy through the entire line may also decrease.

 

Module performance and conveyor speed should both be considered.

 

Example: High-Speed UV Printing

 

A printing machine uses several UV LED modules to support high-speed production.

 

Operators notice that ink curing has become inconsistent.

 

Instead of increasing every lamp to maximum power, maintenance compares the individual curing zones.

 

If one zone produces a lower UV reading than its historical baseline, troubleshooting can focus on that specific module.

 

This can reduce unnecessary adjustments to the rest of the machine.

 

Example: UV Coating Line

 

A coating line uses multiple UV LED stages.

 

The first stage begins the curing reaction, while later stages provide additional exposure.

 

If one stage loses output, the coating may still appear cured but fail:

 

Hardness testing

 

Scratch testing

 

Adhesion testing

 

Comparing individual zones and total UV exposure can provide valuable process information.

 

Example: Electronics Production

 

An automated electronics line uses several UV exposure stations.

 

One production station begins showing higher rejection than another.

 

If the products and materials are identical, UV measurements can be compared between stations.

 

This can help determine whether the difference originates from the curing equipment.

 

Comparing Two Identical Production Lines

 

The same method can be applied across machines.

 

Suppose a factory has:

 

Line 1

 

and

 

Line 2

 

Both use nominally identical UV LED curing systems.

 

However, Line 1 consistently produces better curing results.

 

Compare:

 

Peak UV irradiance

 

Accumulated UV energy

 

Conveyor speed

 

Working distance

 

UV power settings

 

This may reveal differences that are not visible from the machine control panels.

 

Don't Assume New Modules Are Identical to Old Modules

 

After replacing one UV LED module, the new module may produce different output from the remaining older modules.

 

Therefore, after replacement:

 

Measure the new module.

 

Compare with the other modules.

 

Measure the complete curing process.

 

Verify product quality.

 

Record the new baseline.

 

This creates useful maintenance history.

 

Build a Module Performance Record

 

For a multi-module system, consider recording data separately.

 

For example:

 

UV ZoneBaselineCurrent ConditionModule ARecordedRecordedModule BRecordedRecordedModule CRecordedRecordedComplete ProcessRecordedRecorded

 

Over time, this makes it easier to identify which zone is changing.

 

Trend Each UV Module Separately

 

Instead of recording only:

 

“UV Machine Checked – OK”

 

create a trend for each important curing zone.

 

For example:

 

Module A: Stable

 

Module B: Gradual decline

 

Module C: Stable

 

This provides much more useful maintenance information.

 

High-Intensity UV LED Measurement

 

Industrial UV LED curing equipment can generate high irradiance.

 

The Linshang LS137 supports UV irradiance measurement up to:

 

40,000 mW/cm²

 

This makes it suitable for many high-intensity UV LED curing applications within its specified operating conditions.

 

What If All Modules Read Lower?

 

If all UV modules show lower readings than the historical baseline, investigate common factors such as:

 

Measurement procedure

 

Machine power settings

 

Conveyor configuration

 

System cooling

 

Electrical supply

 

Measurement distance

 

Do not immediately conclude that every UV LED module has deteriorated simultaneously.

 

What If Only One Module Reads Lower?

 

Focus first on that particular zone.

 

Check:

 

UV LED condition

 

Optics

 

Cooling

 

Driver

 

Power setting

 

Mechanical position

 

Then measure again after corrective action.

 

What If All UV Measurements Are Normal?

 

If UV measurements remain consistent with the known-good baseline but curing quality has changed, investigate other process variables.

 

These can include:

 

Ink

 

Coating

 

Adhesive

 

Substrate

 

Material thickness

 

Surface preparation

 

Product position

 

UV measurement helps narrow down the root cause.

 

LS137 vs LS136

 

The correct instrument depends on the UV source.

 

UV LED Multi-Lamp Curing System

 

Consider:

 

Linshang LS137

 

Traditional High-Pressure Mercury UV Curing System

 

Consider:

 

Linshang LS136

 

Always identify the source technology before selecting the meter.

 

Who Can Benefit from Multi-Zone UV Measurement?

 

The LS137 can be useful for:

 

Maintenance Engineers

 

Process Engineers

 

Production Engineers

 

QA/QC Teams

 

Equipment Engineers

 

Printing Companies

 

Coating Manufacturers

 

Electronics Manufacturers

 

Machine Builders

 

It is particularly useful where several UV LED modules contribute to one curing process.

 

A Better Way to Maintain Multi-Lamp UV Systems

 

Instead of:

 

Product Fails → Increase All UV Lamps

 

consider:

 

Measure Each Zone → Compare Baseline → Identify Difference → Investigate Specific Module → Correct → Measure Again → Verify Total Process

 

This provides a more targeted approach to maintenance.

 

Looking for Linshang LS137 for Multi-Lamp UV LED Curing Systems in Malaysia?

 

MTM Precision supplies industrial testing and measurement instruments for manufacturing, engineering, maintenance and quality-control applications in Malaysia.

 

If your UV curing machine uses multiple UV LED modules, provide us with:

 

UV wavelength

 

Number of UV modules

 

Machine brand and model

 

Application

 

Conveyor speed

 

Expected UV intensity

 

We can assist you in determining whether the Linshang LS137 UV Energy Meter is suitable for checking your multi-zone UV LED curing system.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

 

Showroom & Service Centre

 

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346

 

Contact MTM Precision for Linshang LS137 UV Energy Meter enquiries, multi-zone UV curing applications, model selection, technical information and quotation in Malaysia.


 

13 Aug 2026