Applications of TENMARS TM-751 Solar Power Meter for Contractors and Engineers Malaysia
Applications of TENMARS TM-751 Solar Power Meter for Contractors and Engineers Malaysia
Solar radiation measurement is not limited to solar panel manufacturers or research laboratories.
Solar PV contractors, electrical engineers, facility managers, building contractors, window film installers and technical training organisations may all encounter situations where knowing the actual intensity of solar radiation is useful.
The TENMARS TM-751 Solar Power Meter provides portable solar radiation measurement in W/m虏, making it suitable for a range of field applications in Malaysia.
Understanding these applications can help companies determine whether a solar power meter should be included in their technical measurement equipment.
What Does the TENMARS TM-751 Measure?
The TENMARS TM-751 is designed to measure solar radiation intensity.
Its measurement range extends up to:
2000 W/m虏
with a resolution of:
0.1 W/m虏
The instrument also provides an approximately 0.25-second sampling rate, allowing technicians to observe changes in solar radiation while adjusting the measurement position or angle.
Instead of describing sunlight simply as "strong" or "weak", technicians can obtain an actual numerical measurement.
Application 1: Solar PV Site Survey
Before installing a photovoltaic system, contractors need to understand the proposed installation area.
A solar power meter can provide supporting field measurements during the site survey.
Technicians can compare different roof locations and identify areas experiencing different solar exposure.
For example:
Roof Section A: 920 W/m虏
Roof Section B: 730 W/m虏
Roof Section C: 510 W/m虏
If Section C is affected by nearby structures or trees, the lower reading provides additional information for further site assessment.
Application 2: Solar Panel Angle Comparison
The amount of solar radiation reaching a surface changes according to its orientation relative to the sun.
Technicians can use the TM-751 to compare solar irradiance at different angles.
For example:
Position 1: 690 W/m虏
Position 2: 820 W/m虏
Position 3: 910 W/m虏
Under similar conditions, Position 3 is receiving the highest measured solar radiation at that particular time.
This can help demonstrate the relationship between panel orientation and incoming solar energy.
A single measurement, however, should not replace professional long-term PV system design.
Application 3: Solar PV Installation
During installation, contractors may use the TM-751 to document solar conditions.
Measurements can support:
Panel positioning checks
Solar exposure comparison
Shading observations
Installation records
Environmental documentation
The meter's portable format makes it practical for rooftop work where technicians may need to move between several measurement points.
Application 4: PV Commissioning
When a photovoltaic system is commissioned, electrical measurements are often recorded.
Adding solar irradiance provides useful environmental context.
A commissioning record might include:
Solar Irradiance: 895 W/m虏
Weather: Clear
PV Array Condition: Clean
Shading: None observed
System Output: Recorded separately
Future technicians reviewing the report can then understand the approximate solar conditions present during the original measurements.
Application 5: Solar PV Maintenance
Solar irradiance measurement can also be useful during preventive maintenance.
Suppose two maintenance visits show different PV output.
Without information about solar conditions, direct comparison may be misleading.
If one inspection was performed at:
350 W/m虏
and another at:
920 W/m虏
the different available solar radiation becomes an important factor.
Recording irradiance improves the context of maintenance data.
Application 6: Troubleshooting Low Solar Output
When a PV system produces less power than expected, technicians need to determine whether the available sunlight is also low.
A solar power meter provides a useful reference.
If irradiance is weak, lower PV output may be expected.
If irradiance is strong but output remains unusually low, technicians can investigate other possible causes such as:
Dirty modules
Partial shading
Module problems
Loose connections
Cable faults
Inverter issues
Electrical problems
System configuration
The TM-751 does not diagnose these faults directly.
It provides environmental information that supports the troubleshooting process.
Application 7: Shading Investigation
Buildings are rarely completely free from obstacles.
Potential sources of solar shading include:
Trees
Water tanks
HVAC equipment
Lift rooms
Antennas
Parapet walls
Adjacent buildings
Signboards
Technicians can compare irradiance at exposed and partially shaded locations.
For example:
Open Area: 940 W/m虏
Partially Shaded Area: 570 W/m虏
The difference can support further investigation of the shading condition.
Application 8: Commercial and Industrial Rooftops
Malaysia has many factories, warehouses, offices and commercial buildings with large rooftop areas suitable for photovoltaic systems.
These roofs may contain several orientations and numerous potential shading obstacles.
A portable solar power meter can be used when surveying different sections of:
Factory rooftops
Warehouses
Shopping complexes
Office buildings
Commercial properties
Industrial facilities
For solar EPC contractors, this makes irradiance measurement a practical field capability.
Application 9: Facility Management
Facility managers increasingly need to understand multiple technical systems within a building.
Where rooftop solar PV is installed, the maintenance toolkit may include instruments for:
Electrical measurements
Temperature
Insulation testing
Solar radiation
Environmental monitoring
The TENMARS TM-751 can provide the solar radiation component of this measurement toolkit.
Facility teams can record irradiance when inspecting the PV system or communicating performance issues to solar contractors.
Application 10: Automotive Solar Film
The TM-751 is not restricted to photovoltaic applications.
It can also support comparative measurements involving automotive solar film.
For example:
Without Film: 910 W/m虏
With Film: 440 W/m虏
This provides a straightforward demonstration of the difference in solar radiation reaching the sensor under the two test conditions.
Automotive tint shops can use this type of measurement as part of product demonstrations.
Application 11: Building Window Film
Commercial and residential buildings may install solar control films on windows.
Potential users include:
Offices
Retail outlets
Hotels
Factories
Schools
Showrooms
Residential buildings
Window film contractors can compare solar radiation before and after the film or through different film samples.
This provides a measurable demonstration rather than relying only on visual appearance.
Application 12: Glass Comparison
Different glass configurations can affect the amount of solar radiation passing through.
The TM-751 can support comparative field measurements involving:
Clear glass
Tinted glass
Coated glass
Automotive glass
Film-treated glass
Such measurements are useful for field comparison and demonstration.
They should not automatically be treated as a substitute for certified laboratory optical testing.
Application 13: Engineering Education
Solar energy concepts become easier to understand when students can measure them directly.
Technical colleges, universities and training centres can use a solar power meter to demonstrate how irradiance changes according to:
Sensor angle
Shading
Cloud cover
Time of day
Measurement location
Glass
Solar film
Students can see the W/m虏 value change in real time as the test condition changes.
Application 14: Renewable Energy Training
Solar training organisations can incorporate irradiance measurement into practical courses.
For example, trainees can compare:
Panel facing Position A
with
Panel facing Position B
and observe how orientation affects the measured solar radiation.
This helps connect photovoltaic theory with real-world measurements.
Application 15: Engineering Demonstrations
Engineers sometimes need a simple instrument to demonstrate solar radiation effects to customers, building owners or project teams.
A numerical W/m虏 reading can be easier to communicate than technical explanations alone.
For example:
"Strong sunlight"
is subjective.
But:
Solar Irradiance = 925 W/m虏
is measurable and recordable.
This can improve technical communication during inspections and presentations.
Who May Need a TENMARS TM-751?
Potential users in Malaysia include:
Solar EPC contractors
Solar PV installers
Electrical contractors
Engineers
Facility managers
Building maintenance teams
Energy management companies
Automotive tint shops
Window film contractors
Glass contractors
Universities
Technical colleges
Training centres
The broad application range makes the TM-751 relevant beyond one specialised industry.
What the TM-751 Does Not Replace
Understanding an instrument's limitations is equally important.
The TM-751 should not automatically be treated as a replacement for:
Complete PV analysers
Electrical testers
VLT meters
Temperature meters
Laboratory spectrophotometers
Professional shading analysis systems
Its primary role is straightforward:
Solar radiation measurement.
Other parameters require the appropriate measurement instruments.
Solar Power Meter vs Lux Meter
Contractors should also avoid confusing solar irradiance with illuminance.
A lux meter measures illuminance in lux.
The TENMARS TM-751 measures solar radiation intensity in W/m虏.
For office and workplace lighting inspection, a lux meter may be appropriate.
For solar radiation and PV-related irradiance measurement, a solar power meter is the more relevant instrument.
Why Portable Measurement Matters
Contractors rarely perform all measurements in a laboratory.
They work on rooftops, construction sites, factories, commercial buildings and customer premises.
A portable instrument allows measurements to be taken where the actual problem exists.
This is one of the key advantages of a handheld solar power meter.
Technicians can move from one measurement point to another and immediately compare solar radiation conditions.
TENMARS TM-751 for Malaysian Contractors and Engineers
Malaysia's climate creates numerous applications involving solar radiation.
At the same time, the country's growing solar PV sector means more contractors, building owners and maintenance teams need practical tools for installation and inspection.
The TENMARS TM-751 Solar Power Meter provides a straightforward way to measure solar radiation up to 2000 W/m虏.
Whether the application is solar PV, building glass, automotive tint or technical training, the instrument provides measurable solar radiation data that can support better field evaluation and documentation.
Looking for TENMARS TM-751 Solar Power Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for solar PV, electrical, building, environmental and industrial applications throughout Malaysia.
Contact our team for enquiries about the TENMARS TM-751 Solar Power Meter or assistance selecting suitable measurement equipment for your application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
13 Aug 2026