Why Solar Irradiance Measurement Matters for Solar PV Projects Malaysia
Why Solar Irradiance Measurement Matters for Solar PV Projects Malaysia
Solar photovoltaic systems generate electricity from available solar energy, but sunlight conditions are constantly changing.
Cloud cover, time of day, panel orientation, shading, weather and site conditions can all affect the solar radiation reaching a photovoltaic array.
For this reason, solar PV performance should not always be evaluated using electrical output alone.
Measuring solar irradiance in W/m² provides important environmental information that helps contractors and technicians understand the conditions under which a PV system is operating.
A portable instrument such as the TENMARS TM-751 Solar Power Meter can be used to measure solar radiation directly at the site.
What Is Solar Irradiance?
Solar irradiance describes the amount of solar power reaching a surface per unit area.
It is commonly expressed in:
W/m² — watts per square metre
A higher W/m² reading indicates greater solar radiation reaching the measurement surface at that moment.
However, irradiance is not constant.
It can change within seconds when clouds move across the sun.
It also changes according to:
Time of day
Weather
Season
Measurement location
Surface orientation
Sensor angle
Shading
Surrounding structures
This is why irradiance measurement provides valuable context for solar PV work.
Why PV Output Alone Does Not Tell the Whole Story
Imagine a technician visits a rooftop solar system and sees that the system is producing less power than expected.
Is there a fault?
Not necessarily.
The first question should include:
How much solar radiation is available at the time of measurement?
If irradiance is low because of cloud cover, reduced photovoltaic output may be normal.
If irradiance is high but system output remains unusually low, further investigation may be necessary.
Without an irradiance measurement, the technician is missing an important piece of information.
Example: Low Output During Low Irradiance
Suppose a technician records:
Solar Irradiance: 280 W/m²
while the PV system is producing significantly below its rated output.
Under weak solar radiation, reduced output is expected.
The technician should therefore consider the environmental conditions before concluding that there is a problem with the photovoltaic system.
Example: Low Output During Strong Irradiance
Now consider another inspection:
Solar Irradiance: 950 W/m²
but the system output remains unexpectedly low.
This situation may justify additional investigation.
Possible areas to inspect include:
Dirty solar modules
Partial shading
Damaged modules
Cable connections
Connectors
Electrical faults
Inverter operation
System configuration
Module condition
The solar power meter does not identify which fault is present.
Instead, it provides environmental context that helps the technician decide what to investigate next.
TENMARS TM-751 for Solar Irradiance Measurement
The TENMARS TM-751 Solar Power Meter is designed for portable solar radiation measurement.
It provides a measurement range up to:
2000 W/m²
with a resolution of:
0.1 W/m²
The meter also provides an approximately 0.25-second sampling rate, allowing technicians to observe changing solar radiation as environmental conditions or sensor positions change.
This makes it useful for field inspection and comparative measurement.
Solar Irradiance During Site Surveys
Irradiance measurement can begin before a PV system is installed.
During a preliminary site survey, contractors can compare different areas of a roof.
For example:
Roof Area A: 925 W/m²
Roof Area B: 790 W/m²
Roof Area C: 560 W/m²
If Area C is affected by a nearby building or rooftop equipment, the measurement provides supporting information for further shading assessment.
A handheld solar power meter does not replace professional solar design or long-term solar resource analysis, but it can provide useful immediate field data.
Solar Irradiance and Panel Orientation
Solar panels receive different amounts of radiation depending on their orientation relative to the sun.
A technician can use the TM-751 to compare irradiance at different orientations.
For example:
Orientation A: 700 W/m²
Orientation B: 825 W/m²
Orientation C: 915 W/m²
Under similar conditions at that particular moment, Orientation C receives the highest measured solar radiation.
This is a useful demonstration of why panel positioning matters.
However, the sun's position changes throughout the day and year, so a single instantaneous measurement should not be used as the sole basis for complete PV system design.
Solar Irradiance and Shading
Shading is another important consideration for solar PV projects.
Potential sources of shading include:
Trees
Nearby buildings
Water tanks
Parapet walls
HVAC equipment
Antennas
Lift rooms
Utility structures
A technician can compare irradiance in exposed and shaded areas.
For example:
Unshaded Area: 930 W/m²
Partially Shaded Area: 540 W/m²
This provides measurable evidence that the two locations are experiencing different solar exposure under the test conditions.
Irradiance During Solar PV Commissioning
When commissioning a photovoltaic installation, technicians may record several electrical and environmental parameters.
Solar irradiance can be included in this documentation.
A basic record may include:
Date: 13 August 2026
Time: 1:30 PM
Solar Irradiance: 890 W/m²
Weather: Clear
PV Array Condition: Clean
Shading: None observed
System Output: Recorded separately
This information provides context for future technicians reviewing the commissioning results.
Irradiance During Preventive Maintenance
Solar PV systems require ongoing inspection and maintenance.
During preventive maintenance, technicians may inspect:
Solar modules
Mounting structures
Cables
Connectors
Inverters
Electrical protection
Module cleanliness
Shading conditions
Solar irradiance can be recorded alongside these checks.
This helps ensure that performance observations are linked to the solar conditions present during the maintenance visit.
Why Maintenance Records Need Environmental Data
Consider two maintenance visits.
Visit A
Solar irradiance:
400 W/m²
System output:
Moderate
Visit B
Solar irradiance:
900 W/m²
System output:
High
Simply comparing electrical output without considering irradiance could produce the wrong conclusion.
Environmental data makes the comparison more meaningful.
Over time, structured maintenance records can improve troubleshooting and communication between contractors and system owners.
Solar Irradiance for Commercial and Industrial PV
Commercial and industrial solar installations can contain many modules spread across large rooftop areas.
Different sections may experience different conditions because of:
Multiple roof orientations
Building geometry
Localised shading
Rooftop machinery
Adjacent structures
Technicians can take irradiance measurements at different points around the installation to identify significant differences in solar exposure.
This can be useful for factories, warehouses, offices, shopping complexes and other commercial buildings in Malaysia.
Solar Irradiance and Solar Farms
Large ground-mounted solar installations also require careful performance monitoring.
While professional utility-scale projects normally use dedicated monitoring equipment and irradiance sensors, portable solar meters can still have value for field technicians performing local checks and comparisons.
A handheld meter can provide an immediate reading at the technician's actual inspection location.
This can support troubleshooting when investigating a specific area of the site.
Solar Irradiance vs Lux
Solar PV technicians should understand the difference between solar irradiance and illuminance.
A lux meter measures illuminance in lux.
A solar power meter measures solar radiation intensity in W/m².
For applications where the required parameter is solar irradiance, a purpose-designed solar power meter such as the TM-751 is the relevant instrument.
A lux reading should not simply be treated as equivalent to a W/m² measurement.
Solar Irradiance vs Temperature
Solar irradiance should also not be confused with temperature.
The TM-751 measures incoming solar radiation.
Temperature measurement may require separate instruments for:
Ambient temperature
Module temperature
Surface temperature
Electrical component temperature
For detailed PV troubleshooting, technicians may need both solar irradiance and temperature information.
Build a Better Solar PV Measurement Toolkit
A solar contractor's toolkit may contain several instruments because each one measures a different parameter.
Depending on the scope of work, useful equipment may include:
Solar power meter
Digital multimeter
Clamp meter
Insulation tester
Temperature meter
Appropriate PV testing equipment
The TENMARS TM-751 fills the solar radiation measurement role within this toolkit.
Better Measurements Support Better Decisions
Professional troubleshooting should move from assumptions toward measurements.
Instead of saying:
"The sunlight looks weak."
a technician can record:
Solar Irradiance: 310 W/m²
Instead of:
"This part of the roof looks more shaded."
the technician can compare:
Area A: 910 W/m²
Area B: 520 W/m²
Numbers do not automatically provide the complete diagnosis, but they give engineers and technicians stronger information for making decisions.
Why Solar Irradiance Measurement Matters in Malaysia
Malaysia's climate provides strong potential for photovoltaic energy, and solar installations can now be found across residential, commercial and industrial properties.
As more systems are installed, the market increasingly requires not only installation but also:
Inspection
Commissioning
Preventive maintenance
Performance checking
Troubleshooting
Technical documentation
Solar irradiance measurement supports all of these activities.
A portable solar power meter therefore has a practical role in the growing solar PV measurement and maintenance market.
TENMARS TM-751 Solar Power Meter Malaysia
The TENMARS TM-751 Solar Power Meter provides portable solar radiation measurements up to 2000 W/m².
For solar PV contractors, electrical technicians, facility managers and engineers, it provides an immediate way to record the solar radiation present during site inspections and system measurements.
It can be used for:
Solar PV site surveys
Panel angle comparison
Installation
Commissioning
Shading investigation
Maintenance
Troubleshooting
Solar radiation measurement
When solar PV performance matters, understanding the available solar radiation is an important part of understanding the system itself.
Looking for TENMARS TM-751 Solar Power Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for solar PV, electrical, environmental, building and industrial applications in Malaysia.
Contact us for enquiries about the TENMARS TM-751 Solar Power Meter or assistance selecting suitable instruments for solar PV installation, maintenance and troubleshooting.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
13 Aug 2026