TENMARS TM-4002 for Ventilation System Inspection Malaysia
TENMARS TM-4002 for Ventilation System Inspection Malaysia
A ventilation system is designed to move air through a building or facility, but simply hearing a fan running does not confirm that the correct airflow is reaching every area.
Professional ventilation inspection requires actual measurement.
The TENMARS TM-4002 Hot Wire Anemometer provides air velocity, CFM/CMM air volume, temperature, relative humidity, dew point and wet bulb measurements, making it suitable for ventilation inspection and HVAC maintenance applications in Malaysia.
Why Is Ventilation System Inspection Important?
Ventilation performance can change over time due to system operation, maintenance conditions or modifications.
Airflow measurement can help technicians investigate:
Weak ventilation
Uneven airflow
Insufficient supply air
Poor exhaust performance
Differences between rooms or zones
Changes after maintenance
Airflow imbalance
HVAC performance issues
Rather than relying only on whether air can be felt at an outlet, technicians can obtain measurable airflow data.
Measure Ventilation Air Velocity
The TENMARS TM-4002 measures air velocity from:
0.01 to 25.00 m/s
Selectable measurement units include:
m/s
ft/min
km/hr
mph
knots
The ability to measure relatively low air velocities is useful for ventilation applications where airflow may not be strong enough for simple wind-speed instruments to provide the desired measurement capability.
Hot Wire Sensor for Low Airflow
The TM-4002 uses hot wire sensing technology.
Hot wire anemometers are particularly useful for relatively low airflow measurements and applications where a compact sensing probe is required.
This makes the TM-4002 suitable for checking:
HVAC ducts
Ventilation ducts
Supply air systems
Return air systems
Exhaust ventilation
Controlled environments
Telescopic Probe for Ventilation Ducts
The TM-4002 features a telescopic probe extending approximately from:
400 mm to 1020 mm
This allows technicians to reach measurement points deeper inside suitable ventilation ducts.
The probe can be positioned at different points across the duct where the testing method requires multiple readings.
This is useful because airflow inside a duct may not be uniform.
Measure CFM and CMM
Air velocity alone does not indicate the total amount of air moving through a ventilation system.
The TM-4002 supports air volume measurement in:
CFM – Cubic Feet per Minute
and
CMM – Cubic Metres per Minute
With the correct measurement area, technicians can use air volume data when comparing different ventilation points or evaluating system performance.
Supply Air and Exhaust Air Testing
Ventilation systems may contain both supply and exhaust components.
Airflow measurement can be performed at different points to understand how the system is operating.
Typical locations may include:
Supply air ducts
Exhaust ducts
Return air ducts
Air grilles
Diffusers
Ventilation outlets
Comparing measurements can help identify areas that require further investigation.
Ventilation Inspection in Commercial Buildings
Commercial buildings can contain many ventilation zones.
The TM-4002 can be used for airflow assessment in:
Offices
Shopping malls
Hotels
Restaurants
Educational buildings
Commercial complexes
Technicians can compare airflow between different rooms, floors or ventilation zones.
Ventilation Inspection in Industrial Facilities
Industrial facilities may rely on ventilation and exhaust systems to maintain suitable working conditions.
Potential applications include:
Factory ventilation
Workshop ventilation
Production areas
Equipment rooms
General exhaust systems
Industrial building ventilation
Airflow measurements can support maintenance and troubleshooting of these systems.
Temperature and Humidity Measurement
Ventilation assessment may involve more than air movement.
The TENMARS TM-4002 also measures:
Air temperature
Relative humidity
Dew point
Wet bulb temperature
This allows technicians to obtain additional information about the air conditions at the measurement location.
99 Sets of Manual Data Memory
A large ventilation system can require many measurements.
The TM-4002 provides 99 sets of manual data memory, useful when checking multiple:
Rooms
Air outlets
Duct branches
Ventilation zones
Supply points
Exhaust points
MAX, MIN and HOLD functions are also available for field measurements.
Ventilation Troubleshooting with Measurement Data
Suppose one area of a building feels poorly ventilated.
Instead of immediately assuming that the main ventilation fan is faulty, technicians can compare airflow readings at several points.
If airflow is normal near the main duct but significantly lower in one branch, further inspection can focus on that part of the system.
Measured data can therefore help technicians narrow down the possible source of a ventilation problem.
Preventive Maintenance Applications
Ventilation testing does not have to begin only after a complaint occurs.
Facility maintenance teams can perform periodic measurements at selected reference points.
Results can then be compared over time.
A significant change in airflow may indicate that further inspection or maintenance is required.
Who Can Use the TENMARS TM-4002?
The instrument is suitable for:
HVAC contractors
M&E contractors
Facility management companies
Building maintenance departments
Testing and commissioning teams
Engineering consultants
Cleanroom professionals
Industrial maintenance teams
Universities and laboratories
Why Choose TM-4002 for Ventilation Inspection?
The TM-4002 combines:
Hot Wire Air Velocity Measurement
CFM/CMM Air Volume
Temperature
Relative Humidity
Dew Point
Wet Bulb Temperature
together with a 400–1020 mm telescopic probe and 99-set manual memory.
This combination makes it useful for professional ventilation inspection rather than simple general-purpose wind speed measurement.
TENMARS TM-4002 Ventilation Airflow Meter Malaysia
For HVAC, ventilation, facility management and industrial maintenance professionals who require a portable instrument for airflow inspection, the TENMARS TM-4002 Hot Wire Anemometer is a practical option.
For enquiries regarding the TENMARS TM-4002 in Malaysia, contact MTM Precision.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026