How to Measure Solar Irradiance with TENMARS TM-206A Malaysia
How to Measure Solar Irradiance with TENMARS TM-206A Malaysia
Solar irradiance measurement is useful for solar PV installation, system inspection, energy studies and general solar radiation testing. Instead of relying only on weather conditions or visual observation, a solar power meter provides an actual measurement of the solar energy reaching a particular location.
The TENMARS TM-206A Solar Power Meter is a portable instrument designed for measuring solar radiation and is suitable for technicians, solar installers, engineers and maintenance teams in Malaysia.
What Is Solar Irradiance?
Solar irradiance describes the amount of solar power received over a specific surface area.
A commonly used measurement unit is:
W/m² — watts per square metre
Higher readings generally indicate stronger solar radiation reaching the measurement surface.
For solar PV applications, irradiance measurement can help technicians understand whether changes in solar panel output are related to available sunlight or potentially to another part of the PV system.
TENMARS TM-206A Measurement Range
The TENMARS TM-206A provides solar radiation measurement up to:
1999 W/m²
It can display measurements in:
W/m²
BTU/(ft²·h)
Its handheld design makes it convenient for measurements at rooftops, solar farms, industrial facilities and other outdoor locations.
How to Measure Solar Irradiance
1. Select the Measurement Location
Choose the area where solar radiation needs to be evaluated.
For PV applications, measurements should normally be taken as close as practical to the solar panel being assessed.
Avoid accidentally shading the sensor with your body, tools or other equipment.
2. Position the Sensor Correctly
Sensor orientation matters.
If you are evaluating the irradiance reaching a solar panel, position the meter so that the sensing surface represents the orientation of the panel as closely as possible.
Changing the sensor angle can change the measured value.
3. Take the Solar Irradiance Reading
Allow the reading to stabilise and record the displayed measurement.
For example, the instrument may indicate:
850 W/m²
This means approximately 850 watts of solar power per square metre is reaching the measurement plane at that particular moment.
4. Compare Different Positions
One useful application of the TM-206A is comparing irradiance between different positions.
Measurements can be taken at:
Different roof locations
Different panel orientations
Different tilt angles
Shaded and unshaded locations
Different times of the day
These comparisons can provide useful information during solar PV site assessment.
Finding a Suitable Solar Panel Angle
Solar radiation received by a surface changes according to its angle relative to the sun.
The TM-206A can therefore be used to compare readings at several orientations.
For example:
Position A: 720 W/m²
Position B: 815 W/m²
Position C: 890 W/m²
Under those specific measurement conditions, Position C receives the highest solar irradiance.
This type of field comparison can support solar installation assessment, although long-term PV design should also consider seasonal solar paths, roof geometry, shading and other engineering factors.
Checking Shading Conditions
Shading can significantly affect solar PV performance.
Possible sources include:
Trees
Nearby buildings
Roof structures
Water tanks
Antennas
Utility structures
A solar power meter allows technicians to compare irradiance between exposed and partially shaded locations.
This makes the effect easier to quantify than relying on visual inspection alone.
Using Irradiance During PV Troubleshooting
Suppose a PV system appears to be producing less electricity than expected.
The technician measures strong solar irradiance but still observes unusually low electrical output.
This suggests that additional investigation may be necessary.
Possible areas to check include:
Solar panel cleanliness
Partial shading
DC wiring
Connectors
Individual PV modules
Inverter operation
System configuration
Conversely, low PV output during low irradiance may simply reflect the available solar conditions.
Solar irradiance measurement therefore provides useful context during troubleshooting.
Take Multiple Measurements
Outdoor sunlight can change quickly, especially under Malaysia's tropical weather conditions.
Cloud movement can cause readings to rise or fall within a short period.
For better comparisons:
Take several measurements
Measure under similar conditions
Avoid shading the sensor
Keep sensor orientation consistent
Record measurement time
Record weather conditions where relevant
Consistent measurement practice makes comparisons more meaningful.
Other Applications of the TM-206A
The TENMARS TM-206A is not limited to photovoltaic systems.
It can also support solar transmission comparisons involving:
Automotive glass
Window tint
Solar control film
Building glass
Transparent materials
Users can compare solar radiation before and after sunlight passes through a material to evaluate changes in transmitted solar energy.
Who Can Use the TENMARS TM-206A?
The instrument is suitable for applications involving:
Solar PV contractors
Electrical contractors
Solar maintenance companies
Facility management
Energy consultants
Building maintenance
Automotive tinting
Glass and solar film evaluation
Engineering laboratories
Universities and technical colleges
Solar Power Meter Supplier Malaysia
For users who require a portable instrument for measuring solar radiation, the TENMARS TM-206A Solar Power Meter provides a straightforward solution for field measurement and comparative testing.
MTM Precision supplies professional solar, electrical, environmental and industrial testing instruments in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026