Solar Power Meter for PV Installation and Maintenance Malaysia
Solar Power Meter for PV Installation and Maintenance Malaysia
Solar photovoltaic systems are becoming increasingly common across residential, commercial and industrial properties in Malaysia. For solar installers and maintenance technicians, checking only voltage, current and power output does not always provide the complete picture.
One important environmental factor is solar irradiance — the amount of solar energy reaching the PV panel.
The TENMARS TM-206A Solar Power Meter provides a practical way to measure solar radiation during PV installation, inspection and maintenance work.
Why Solar Irradiance Matters for PV Systems
The electrical output of a photovoltaic module depends heavily on the amount of sunlight reaching its surface.
When solar irradiance increases, the potential electrical output of the PV system generally increases. When irradiance decreases because of cloud cover, shading or other environmental conditions, output can also fall.
This means low PV output does not necessarily indicate a faulty solar panel.
Technicians need to consider both:
Solar Irradiance → Available Solar Energy
and
PV Output → Electrical Energy Produced
Measuring both can provide better information when assessing system performance.
Using TENMARS TM-206A During PV Installation
Before installing solar panels, technicians can use the TM-206A to compare solar radiation at different locations.
This can help with preliminary assessment of:
Roof locations
Panel orientation
Tilt angles
Nearby shading
Building obstructions
Trees and vegetation
For example, two roof sections may appear equally suitable visually, but irradiance measurements may reveal differences caused by surrounding structures.
Checking Solar Panel Orientation
Panel orientation affects the amount of solar radiation reaching the module.
A portable solar power meter allows technicians to compare readings at different orientations under the same general sunlight conditions.
The sensor should be positioned consistently when making comparisons.
The position producing the stronger irradiance reading under the test conditions may indicate better exposure at that particular time.
For proper system design, this information should be considered together with long-term solar path, seasonal variation and site-specific engineering requirements.
Solar PV Maintenance Applications
Solar irradiance measurement remains useful after a system has been installed.
During routine inspection, technicians may compare current PV output against the available sunlight.
This is particularly useful when investigating customer complaints such as:
Solar production has dropped
One section produces less power
Energy generation appears inconsistent
PV output is lower than expected
Performance changes during certain periods
The TM-206A provides an independent measurement of the solar conditions present during the inspection.
Example: Low PV Output
Consider a solar technician inspecting a system with unexpectedly low output.
Situation A
Solar irradiance: Low
PV output: Low
The reduced output may be related primarily to weak sunlight or cloud conditions.
Situation B
Solar irradiance: High
PV output: Unusually Low
Further investigation may be necessary.
Possible causes include:
Dirty PV modules
Partial shading
Damaged modules
Loose connectors
DC wiring problems
Inverter issues
System configuration
Module degradation
Solar irradiance measurement does not identify the electrical fault directly, but it gives technicians valuable context for troubleshooting.
Checking the Effect of Shading
Even relatively small areas of shading can affect PV system performance.
Common sources of shading in Malaysia include:
Trees
Nearby buildings
Roof structures
Water tanks
Antennas
Signboards
New construction around the property
Using the TM-206A, technicians can compare solar irradiance in exposed and shaded locations.
This turns a visual observation into a measurable comparison.
TENMARS TM-206A for Field Work
The TM-206A is designed as a handheld solar power meter, making it practical for technicians working at different sites.
The instrument measures solar radiation up to 1999 W/m² and provides readings in:
W/m²
BTU/(ft²·h)
For most solar PV applications, W/m² is the more commonly recognised unit.
Record Irradiance Together with PV Measurements
For more useful maintenance records, technicians can record solar irradiance together with other system information.
For example:
Date: 15 August
Time: 12:30 PM
Solar Irradiance: 920 W/m²
PV Output: Recorded system output
Weather: Clear / partly cloudy
Observation: No visible shading
Creating consistent records makes it easier to compare system performance during future maintenance visits.
Malaysia's Changing Weather Conditions
Malaysia's tropical climate means solar conditions can change rapidly.
A clear sky can quickly become cloudy, causing significant changes in solar irradiance.
When comparing measurements:
Take readings within a short period
Maintain consistent sensor orientation
Avoid shading the sensor
Record weather conditions
Repeat measurements when necessary
This helps reduce misleading comparisons caused by changing sunlight.
Who Should Use a Solar Power Meter?
The TENMARS TM-206A can be useful for:
Solar PV installers
Solar maintenance contractors
Electrical contractors
Facility management teams
Energy consultants
Engineering companies
Building maintenance departments
Universities
Technical training institutions
It is particularly useful when a portable field instrument is required for quick solar radiation measurements.
More Than PV Testing
The TM-206A can also be used for applications involving solar transmission through transparent materials.
Examples include:
Automotive window tint
Solar control film
Building glass
Window glass
Transparent materials
This gives the instrument applications beyond conventional solar PV installation.
Solar Testing Equipment Supplier Malaysia
For solar contractors and engineers who need to measure actual solar radiation during installation or maintenance, the TENMARS TM-206A Solar Power Meter provides a simple and practical measurement solution.
MTM Precision supplies professional testing and measurement equipment for solar, electrical, environmental and industrial applications in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026