Linshang LS190 Gloss Meter for Paint and Coating Inspection Malaysia

Linshang LS190 Gloss Meter for Paint and Coating Inspection Malaysia

 

Surface gloss is an important quality parameter for paints and coatings. Two coated products may have the same colour but still look different because their gloss levels are not consistent.

 

For manufacturers, coating contractors and QA/QC departments that need objective surface inspection, the Linshang LS190 Gloss Meter provides a practical method of measuring gloss numerically instead of relying only on visual judgement.

 

The LS190 uses a 60° measurement angle, offers a 0–200 GU measuring range, and is designed for economical routine gloss inspection.

 

Why Is Gloss Important in Paint and Coating Quality?

 

Gloss affects how a finished surface appears under light.

 

Depending on the product specification, a coating may be designed to have a matte, satin, semi-gloss or glossy appearance.

 

Problems occur when the finished surface does not match the approved standard.

 

Gloss differences may result from:

 

Paint formulation changes

 

Incorrect mixing ratios

 

Coating thickness variation

 

Surface preparation

 

Application technique

 

Spray settings

 

Curing temperature

 

Drying conditions

 

Material differences

 

Production process changes

 

A gloss meter helps manufacturers identify these variations quantitatively.

 

Why Visual Inspection Is Not Enough

 

A QC operator may look at two painted panels and decide that they appear similar.

 

Another operator may disagree.

 

Lighting conditions can also influence visual judgement. A surface may appear glossy under bright lighting but less glossy in another environment.

 

Using a gloss meter provides a numerical Gloss Unit (GU) reading.

 

For example:

 

Approved sample: 82 GU

 

Production sample A: 80 GU

 

Production sample B: 61 GU

 

The measurement immediately shows which sample differs significantly from the approved reference.

 

60° Measurement for General Coating Inspection

 

The Linshang LS190 uses 60° measurement geometry, which is widely used for general-purpose gloss inspection.

 

This makes it useful for many painted and coated products such as:

 

Painted metal components

 

Machinery

 

Furniture

 

Plastic parts

 

Automotive components

 

Powder-coated products

 

Decorative panels

 

Industrial equipment

 

Coated building materials

 

Companies should always follow the measurement angle specified by their applicable product standard or customer requirement.

 

0–200 GU Measurement Range

 

The LS190 provides a 0–200 GU measuring range.

 

This makes it suitable for many routine coating applications where the expected gloss level falls within this range.

 

A wider-range gloss meter is not automatically necessary for every application.

 

For companies mainly performing routine production checks, choosing an instrument that matches the actual measurement range can reduce equipment cost.

 

QC Limits for Production Inspection

 

One useful feature of the LS190 is its QC limit function.

 

Users can establish upper and lower acceptable gloss values.

 

Suppose a painted product is required to remain between:

 

75 GU and 85 GU

 

Operators can measure production samples and quickly determine whether the coating remains within the specified range.

 

This can be useful for repetitive production inspection where many components need to be checked.

 

Incoming Paint and Coated Component Inspection

 

Gloss inspection can begin before production.

 

Companies purchasing pre-painted or coated components from suppliers can use the LS190 during incoming QC.

 

Measurements can be compared against:

 

Approved reference samples

 

Previous deliveries

 

Customer specifications

 

Internal QC limits

 

If a supplier changes its coating process or material, gloss measurements may help identify differences before the components are used in production.

 

Monitor the Coating Process

 

Regular gloss measurements can also help detect process changes.

 

If gloss values gradually move away from the normal range, QC personnel can investigate possible causes before a larger quantity of non-conforming products is produced.

 

Potential causes may include:

 

Changes in coating thickness

 

Different curing conditions

 

Incorrect material preparation

 

Surface contamination

 

Spray equipment changes

 

Different raw material batches

 

Gloss measurement therefore becomes part of process control rather than only final inspection.

 

Batch-to-Batch Consistency

 

Customers often expect products supplied today to look similar to products supplied several months later.

 

This can be difficult to control using visual inspection alone.

 

By recording gloss values for each batch, manufacturers can establish a measurable production history.

 

For example:

 

Batch 1: 78 GU

Batch 2: 80 GU

Batch 3: 79 GU

Batch 4: 62 GU

 

The abnormal batch becomes immediately visible.

 

USB Connection and Excel Export

 

The Linshang LS190 supports computer connection through USB and allows measurement data to be exported to Excel.

 

This can help coating and manufacturing companies maintain:

 

Paint inspection records

 

Production batch records

 

Supplier QC reports

 

Customer inspection reports

 

Historical gloss data

 

Quality investigation documentation

 

For companies implementing ISO-based quality systems, keeping organized measurement records can be especially useful.

 

Applicable Standards

 

The LS190 is designed according to commonly used gloss measurement standards including:

 

ISO 2813

 

ASTM D523

 

DIN 67530

 

GB/T 9754

 

These standards help provide a consistent approach to surface gloss measurement.

 

Users should still confirm the specific standard required for their own product or customer specification.

 

Typical Malaysian Applications

 

The Linshang LS190 can be considered for:

 

Paint Manufacturers

For checking finished coating appearance.

 

Powder Coating Companies

For monitoring gloss consistency between production batches.

 

Metal Fabricators

For inspecting painted or coated components.

 

Automotive Component Suppliers

For appearance-related QC.

 

Furniture Manufacturers

For checking painted and finished surfaces.

 

Plastic Manufacturers

For coated and decorative plastic components.

 

QA/QC Departments

For incoming, production and final inspection.

 

Why an Economical Gloss Meter Can Make Sense

 

Not every coating company requires a high-end laboratory gloss meter.

 

For routine production inspection, companies may mainly need to answer:

 

Is the gloss within specification?

 

Does this batch match the approved sample?

 

Has the coating process changed?

 

Is the supplier's product consistent?

 

If the application requires general 60° measurement within 0–200 GU, the LS190 provides a cost-effective way to answer these questions.

 

Conclusion

 

For paint and coating inspection, visual appearance should not depend entirely on subjective judgement.

 

The Linshang LS190 Gloss Meter allows manufacturers and QA/QC teams to convert surface gloss into measurable GU values.

 

With its 60° geometry, 0–200 GU range, QC limit function and USB/Excel data management, the LS190 is a practical choice for routine paint and coating quality control in Malaysia.

 

For companies looking to improve coating consistency while keeping instrument investment under control, the LS190 offers a straightforward and economical solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026