Linshang LS190 Gloss Meter for Plastic Surface Testing Malaysia
Linshang LS190 Gloss Meter for Plastic Surface Testing Malaysia
Surface appearance is an important quality factor for many plastic products. Even when colour, dimensions and material specifications are correct, differences in surface gloss can make two production batches look noticeably different.
The Linshang LS190 Gloss Meter provides a simple way for plastic manufacturers and QA/QC teams to measure surface gloss using numerical Gloss Unit (GU) values instead of relying entirely on visual inspection.
With 60° measurement geometry, a 0–200 GU range and 1 GU resolution, the LS190 is designed as an economical instrument for routine industrial gloss inspection.
Why Measure Gloss on Plastic Products?
Plastic surfaces can have very different appearances depending on material, mould condition and manufacturing process.
Gloss variation may be caused by:
Different raw material batches
Injection moulding parameters
Mould surface condition
Surface texture
Polishing
Coatings
Additives
Processing temperature
Surface contamination
Production changes
For products where appearance is important, these differences can lead to customer complaints even when the component remains dimensionally correct.
A gloss meter gives manufacturers an objective way to monitor these variations.
Replace Visual Judgement with GU Values
Consider two plastic housings produced several weeks apart.
An operator may say:
“The second batch looks slightly duller.”
That observation is difficult to quantify.
With a gloss meter, the company might obtain:
Approved sample: 76 GU
Current production: 74 GU
Another batch: 55 GU
The third result provides a clear reason for further investigation.
Numerical measurements are easier to communicate between production, QC, suppliers and customers.
60° Measurement for General Plastic Inspection
The Linshang LS190 uses a 60° measurement angle.
This is a widely used general-purpose geometry for surface gloss measurement.
The LS190 can therefore be considered for various plastic products, including:
Injection-moulded components
Plastic housings
Electrical enclosures
Automotive interior components
Consumer products
Plastic panels
Decorative components
Coated plastic surfaces
Packaging materials
Users should always confirm that 60° geometry matches their specific testing standard or customer requirement.
Monitor Injection Moulding Consistency
Gloss variation can sometimes indicate changes in the injection moulding process.
Possible influences include:
Mould temperature
Material temperature
Injection pressure
Cooling conditions
Mould surface wear
Material formulation
By establishing a normal gloss range for an approved product, manufacturers can periodically check production samples.
Unexpected changes in GU readings can provide an additional signal that the process should be investigated.
Compare Different Mould Cavities
For multi-cavity moulds, manufacturers may also want to compare surface appearance between cavities.
If products from one cavity consistently show a different gloss level, this may indicate differences in mould surface condition or processing.
A portable gloss meter can help QC personnel compare samples using measurable values instead of relying only on eyesight.
QC Upper and Lower Limits
The LS190 supports upper and lower QC limit settings.
For example, suppose a plastic component has an acceptable specification of:
65–75 GU
Production readings can be checked against this range.
A reading of 70 GU is within the target.
A reading of 52 GU may require further investigation.
This makes the LS190 useful for repetitive production inspection where operators need a straightforward method to determine whether gloss remains within the established requirement.
Incoming Material and Supplier Inspection
Plastic manufacturers are not the only potential users.
Companies purchasing finished plastic components can use gloss measurement during incoming QC.
The LS190 can help compare:
Supplier deliveries
Approved samples
Different suppliers
Previous production batches
Customer reference samples
If a supplier changes material, moulding conditions or surface finishing, gloss measurements can help identify appearance differences.
Finished Product Inspection
For products sold directly to consumers, appearance can influence perceived quality.
Examples include:
Electronic housings
Appliances
Automotive parts
Furniture components
Decorative products
Consumer accessories
Consistent gloss helps products from different production batches maintain a similar appearance.
This is particularly important when several components are assembled next to each other.
USB Data Transfer and Excel Export
The LS190 supports USB connection to a computer and data export to Excel.
This allows QC departments to create more structured records, including:
Plastic production batch reports
Incoming QC records
Supplier comparison reports
Mould cavity comparison data
Customer inspection records
Historical gloss trends
If a quality issue occurs later, historical data can provide useful information during investigation.
Is 0–200 GU Enough?
The LS190 has a 0–200 GU measuring range.
Whether this is suitable depends on the actual product.
For many routine plastic surface measurements, this range may be sufficient. However, companies should evaluate their expected gloss levels before selecting an instrument.
If the application requires a wider measurement range or finer resolution, another gloss meter may be more appropriate.
The correct approach is to match the instrument specification to the application.
Who Can Use the Linshang LS190?
Potential users in Malaysia include:
Plastic injection moulding factories
Automotive component manufacturers
Electronics manufacturers
Appliance manufacturers
Packaging companies
Plastic product suppliers
QA/QC departments
Incoming inspection teams
Product development departments
A Practical Tool for Plastic QC
Surface appearance problems are sometimes difficult to explain because terms such as “too shiny” or “too dull” are subjective.
Gloss measurement provides a common numerical language.
Instead of arguing about whether two parts look different, production and QC teams can compare actual GU values.
This can make communication with suppliers and customers more efficient.
Conclusion
The Linshang LS190 Gloss Meter is a practical option for routine plastic surface gloss testing in Malaysia.
Its 60° measurement geometry, 0–200 GU range, 1 GU resolution, QC limit function and USB/Excel data capability make it suitable for manufacturers that want a straightforward method of monitoring plastic surface appearance.
For injection moulding factories, component suppliers and QA/QC departments looking to replace subjective visual inspection with measurable data, the LS190 offers an economical entry point into professional gloss measurement.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026