Linshang LS190 Gloss Meter for Ceramic and Tile Testing Malaysia
Linshang LS190 Gloss Meter for Ceramic and Tile Testing Malaysia
Surface gloss plays an important role in the appearance and consistency of ceramic products, tiles and other decorative building materials.
When different production batches have inconsistent gloss levels, the difference may become visible after installation—especially when tiles from different batches are placed next to each other.
The Linshang LS190 Gloss Meter provides a practical method for measuring surface gloss using numerical Gloss Unit (GU) values.
With a 60° measurement angle, 0–200 GU measuring range and 1 GU resolution, the LS190 is designed for economical routine quality control.
Why Measure Gloss on Ceramic and Tile Surfaces?
Ceramic and tile surfaces can vary from relatively matte finishes to polished and glossy surfaces.
Gloss may be influenced by:
Glaze formulation
Raw materials
Firing temperature
Firing conditions
Polishing process
Surface treatment
Production parameters
Surface contamination
Different production batches
Even when colour and dimensions are correct, inconsistent gloss can affect the overall appearance of the finished installation.
The Problem with Visual Inspection
Visual checking is useful, but it can be subjective.
A tile may look acceptable under factory lighting but appear different when installed under strong indoor lighting or natural sunlight.
Different inspectors may also judge gloss differently.
A gloss meter provides an actual GU reading.
For example:
Approved reference: 82 GU
Batch A: 80 GU
Batch B: 83 GU
Batch C: 64 GU
Instead of simply saying that Batch C “looks duller,” the QC team now has measurable evidence of the difference.
60° Gloss Measurement
The Linshang LS190 uses 60° measurement geometry.
60° is commonly used as a general-purpose gloss measurement angle for many surfaces.
This makes the LS190 suitable for routine comparison of appropriate ceramic and tile surfaces where 60° measurement is required.
Users should always check the applicable product specification or testing standard before deciding which measurement geometry to use.
0–200 GU Measuring Range
The LS190 provides a measuring range of:
0–200 GU
For many routine surface-quality inspections, this provides a useful measurement range.
The important point is not to purchase the gloss meter with the largest possible GU number.
Instead, the measuring range should match the expected gloss level of the product.
If the ceramic or tile samples normally fall within the LS190's measurement range, the instrument can provide a cost-effective solution for regular QC inspection.
Production Batch Comparison
Batch consistency is particularly important for decorative building materials.
A customer may purchase tiles manufactured at different times.
If one batch is noticeably more glossy than another, the difference can become obvious after installation.
Manufacturers can use gloss measurements to compare production batches against an approved reference.
This helps create measurable internal acceptance criteria.
Useful for Incoming Inspection
Tile distributors, contractors and building material suppliers can also use gloss measurement during incoming inspection.
Measurements may be used to compare:
Current delivery vs approved sample
Current batch vs previous batch
Supplier A vs Supplier B
Different production lots
Replacement tiles vs existing stock
This can help identify appearance differences before products are supplied to a project.
QC Upper and Lower Limits
The LS190 allows users to establish upper and lower QC limits.
Suppose a particular glazed tile has an approved gloss requirement of:
70–85 GU
Production samples can be measured and compared against this range.
If a batch consistently falls outside the established limits, the manufacturer can investigate the production process before releasing the goods.
This is much more systematic than depending only on visual judgement.
Useful for Polishing Process Control
For polished surfaces, gloss measurement can also provide information about process consistency.
If the polishing condition changes, GU values may begin to vary.
Regular measurement can help operators monitor whether the finishing process remains stable.
This can be useful for:
Polished tiles
Decorative ceramic surfaces
Certain stone products
Surface-finished building materials
USB and Excel Data Export
The Linshang LS190 supports USB communication with a computer and measurement data can be exported to Excel.
This allows companies to maintain records such as:
Production batch measurements
Incoming QC reports
Supplier inspection records
Customer acceptance records
Historical gloss data
Quality investigation reports
Keeping numerical records can be especially valuable when a customer raises a batch-consistency issue.
From Subjective Appearance to Measurable QC
Without measurement equipment, a quality discussion may sound like this:
“This batch seems more glossy.”
“The supplier says it is the same.”
“The customer says it looks different.”
These discussions are difficult because everyone is relying on visual perception.
With gloss measurement, the discussion can become:
“Approved sample: 78 GU.”
“Previous batch: 79 GU.”
“Current batch: 61 GU.”
This gives all parties a much clearer basis for investigating the difference.
Who Can Use the LS190?
Potential users in Malaysia include:
Ceramic manufacturers
Tile manufacturers
Building material suppliers
Tile distributors
QA/QC departments
Contractors
Interior finishing companies
Inspection companies
Stone and surface-finishing businesses
Is the LS190 Suitable for Every Tile?
No single gloss meter should automatically be assumed suitable for every material.
Users should consider:
Surface gloss level
Measurement geometry required
Product standard
Customer specification
Required resolution
Measuring range
The LS190 is best considered where 60° measurement, 0–200 GU range and 1 GU resolution meet the actual inspection requirement.
Conclusion
The Linshang LS190 Gloss Meter provides an economical method for objective gloss measurement of suitable ceramic, tile and related surfaces.
Instead of relying only on whether a product “looks glossy enough,” manufacturers and QC teams can establish measurable GU values and compare production against approved references.
With its 60° geometry, 0–200 GU range, QC limit function and USB/Excel data capability, the LS190 can be a practical tool for routine ceramic and tile gloss testing in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026