Linshang LS190 Gloss Meter for Metal Surface Inspection Malaysia
Linshang LS190 Gloss Meter for Metal Surface Inspection Malaysia
Metal products are often evaluated not only by dimensions, strength and coating thickness, but also by their final surface appearance.
Painted, coated, polished and decorative metal components can show noticeable differences in gloss between production batches. For manufacturers and QA/QC departments, relying only on visual inspection can make these differences difficult to quantify.
The Linshang LS190 Gloss Meter provides a practical method for measuring surface gloss numerically.
With a 60° measurement angle, 0–200 GU measuring range and 1 GU resolution, the LS190 is designed for economical routine quality-control applications.
Why Measure Gloss on Metal Surfaces?
Metal components may undergo many different finishing processes, including:
Painting
Powder coating
Polishing
Protective coating
Decorative coating
Surface treatment
Plating
Lacquering
The final appearance can change when production conditions vary.
A component may meet dimensional requirements but still be rejected because its surface finish does not match other components.
Gloss measurement helps manufacturers control this appearance more objectively.
Painted Metal Inspection
Painted metal products are widely used in:
Machinery
Electrical enclosures
Automotive components
Furniture
Appliances
Industrial equipment
Metal cabinets
Building products
Changes in paint formulation, coating thickness, spraying conditions or curing can affect the final gloss.
Using the LS190, QC personnel can compare the finished surface against an approved reference sample.
Powder Coating Quality Control
Powder-coated products are another useful application for gloss measurement.
A powder-coated surface may be specified to achieve a particular appearance. If processing conditions change, the resulting gloss may also change.
Possible factors include:
Powder formulation
Coating thickness
Oven temperature
Curing time
Surface preparation
Application settings
Regular gloss measurement can help manufacturers detect these variations.
Why Visual Inspection Can Be Misleading
Consider two metal panels.
Under one lighting condition, they may appear identical.
Under stronger lighting, one may look noticeably more reflective.
Different inspectors may also have different opinions.
A gloss meter changes the discussion from:
“This panel looks slightly dull.”
to measurable data such as:
Approved sample: 76 GU
Production sample A: 75 GU
Production sample B: 74 GU
Production sample C: 58 GU
The abnormal sample is much easier to identify.
60° General-Purpose Gloss Measurement
The Linshang LS190 uses 60° geometry, commonly used for general-purpose gloss measurement.
It can therefore be considered for appropriate metal surface applications where 60° measurement is required.
However, companies should always check their applicable testing standard, customer requirement or internal specification before deciding on the measurement geometry.
0–200 GU Measuring Range
The LS190 provides a measuring range of:
0–200 GU
For many routine painted and coated metal surfaces, this can provide a practical working range.
A company does not necessarily need the widest-range gloss meter available.
If normal products fall within the LS190's measuring capability, choosing an economical 0–200 GU instrument can reduce equipment investment while still providing useful QC information.
QC Upper and Lower Limit Setting
For repetitive production inspection, the LS190 allows upper and lower QC limits to be established.
For example, suppose an approved coated metal component should remain between:
65 GU and 80 GU
Operators can measure samples from the production line and compare the readings against this range.
This is useful for:
Incoming inspection
Production monitoring
Finished-goods QC
Supplier quality control
Batch comparison
It also makes inspection easier for operators because acceptance criteria can be defined numerically.
Incoming Coated Component Inspection
Many manufacturers purchase finished metal components from external suppliers.
These components may arrive already painted, powder coated or surface finished.
The LS190 can help incoming QC teams compare:
New deliveries against approved samples
Different supplier batches
Different suppliers
Replacement components
Historical production lots
This can help identify appearance differences before the components enter assembly.
Batch-to-Batch Consistency
Imagine a manufacturer producing metal enclosures every month.
The approved product normally measures approximately 70 GU.
Recorded results are:
Batch A: 71 GU
Batch B: 69 GU
Batch C: 72 GU
Batch D: 54 GU
Batch D clearly requires investigation.
Without measurement records, the difference might only be noticed after assembly or customer delivery.
Useful for Supplier Discussions
Surface-finish disputes can be difficult when both sides rely on visual judgement.
A buyer may say:
“The new batch is duller.”
The supplier may respond:
“It looks the same to us.”
Numerical gloss data provides a more objective starting point for investigation.
It can help purchasing, QC and suppliers discuss whether a genuine change has occurred.
USB Connection and Excel Export
The LS190 supports connection to a computer through USB, with measurement data export to Excel.
This can help manufacturers maintain:
Production QC records
Coating inspection reports
Supplier comparison data
Incoming inspection records
Customer reports
Historical gloss trends
Data records can be particularly useful when investigating changes that occurred several months earlier.
Supporting More Consistent Manufacturing
Gloss measurement should not only be used after a defect occurs.
Regular measurements can become part of process monitoring.
If readings begin gradually moving away from the normal production range, the team can investigate before the variation becomes severe.
This supports preventive quality control rather than relying only on final-product rejection.
Suitable Malaysian Industries
The Linshang LS190 can be considered by:
Metal fabrication companies
Powder coating companies
Paint shops
Automotive component manufacturers
Electrical enclosure manufacturers
Furniture manufacturers
Appliance manufacturers
Machinery manufacturers
QA/QC departments
Industrial inspection companies
When Is the LS190 a Practical Choice?
The LS190 is particularly suitable when the application requires:
60° gloss measurement
Measurement within 0–200 GU
Routine industrial QC
1 GU resolution
QC upper and lower limits
Portable measurement
USB computer communication
Excel data export
For applications requiring a wider GU range, finer resolution or different measurement geometry, another model may be more appropriate.
Conclusion
For painted, coated and finished metal components, consistent gloss can be an important part of overall product quality.
The Linshang LS190 Gloss Meter allows manufacturers to replace subjective descriptions such as “too shiny” or “too dull” with measurable GU values.
With its 60° measurement geometry, 0–200 GU range, QC judgement function and USB/Excel data capability, the LS190 provides an economical solution for routine metal surface gloss inspection in Malaysia.
For manufacturers looking to strengthen incoming inspection, production QC and batch consistency without investing in an unnecessarily complex instrument, the LS190 is a practical model to consider.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026